 |
This article includes a list of general references, but it lacks sufficient corresponding inline citations. Please help to improve this article by introducing more precise citations. (January 2014) (Learn how and when to remove this message)
|
Inphotography and optics, vignetting (/vɪnˈjɛtɪŋ/; vin-YET-ing) is a reduction of an image's brightnessorsaturation toward the periphery compared to the image center. The word vignette, from the same root as vine, originally referred to a decorative border in a book. Later, the word came to be used for a photographic portrait that is clear at the center and fades off toward the edges. A similar effect is visible in photographs of projected imagesorvideos off a projection screen, resulting in a so-called "hotspot" effect.
Vignetting is often an unintended and undesired effect caused by camera settings or lens limitations. However, it is sometimes deliberately introduced for creative effect, such as to draw attention to the center of the frame. A photographer may deliberately choose a lens that is known to produce vignetting to obtain the effect, or it may be introduced with the use of special filtersorpost-processing procedures.
When using zoom lenses, vignetting may occur all along the zoom range, depending on the aperture and the focal length. However, it may not always be visible, except at the widest end (the shortest focal length). In these cases, vignetting may cause an exposure value (EV) difference of up to 3EV.[1]
There are several causes of vignetting. Sidney F. Ray[2] distinguishes the following types:
A fourth cause is unique to digital imaging:
A fifth cause is unique to analog imaging:
Mechanical vignetting occurs when light beams emanating from object points located off-axis (laterally or vertically off from the optical axis of an optical system under consideration) are partially blocked by external objects of the optical system such as thick or stacked filters, secondary lenses, and improper lens hoods. This has the effect of changing the entrance pupil shape as a function of angle (resulting in the path of light being partially blocked). Darkening can be gradual or abrupt – the smaller the aperture, the more abrupt the vignetting as a function of angle.
When some points on an image receives no light at all due to mechanical vignetting (the paths of light to these image points is completely blocked), then this results in a restriction of the Field of View (FOV) – parts of the image are then completely black.
This type of vignetting is caused by the physical dimensions of a multiple element lens. Rear elements of the lens are shaded by elements in front of them, which reduces the effective lens opening for off-axis incident light. The result is a gradual decrease in light intensity towards the image periphery. Optical vignetting is sensitive to the lens aperture and can often be cured by a reduction in aperture of 2–3 stops. (Anincrease in the F-number.)
Unlike the previous types, natural vignetting (also known as natural illumination falloff) is not due to the blocking of light rays. The falloff is approximated by the cos4 or "cosine fourth" law of illumination fall off. Here, the light fall off is proportional to the fourth power of the cosine of the angle at which the light impinges on the film or sensor array. Wide angle rangefinder designs and the lens designs used in compact cameras are particularly prone to natural vignetting. Telephoto lenses, retrofocus wide angle lenses used on SLR cameras, and telecentric designs in general are less troubled by natural vignetting. A gradual grey filter or postprocessing techniques may be used to compensate for natural vignetting, as it cannot be cured by stopping down the lens. Some modern lenses are specifically designed so that the light strikes the image perpendicular or nearly so, eliminating or greatly reducing vignetting.
Pixel vignetting only affects digital cameras and is caused by angle-dependence of the digital sensors[clarification needed]. Light incident on the sensor at normal incident produces a stronger signal than light hitting it at an oblique angle. Most digital cameras use built-in image processing to compensate for optical vignetting and pixel vignetting when converting raw sensor data to standard image formats such as JPEGorTIFF. The use of offset microlenses over the image sensor can also reduce the effect of pixel vignetting.
For artistic effect, vignetting is sometimes applied to an otherwise un-vignetted photograph and can be achieved by burning the outer edges of the photograph (with film stock) or using digital imaging techniques, such as masking darkened edges. The Lens Correction filter in Photoshop can also achieve the same effect.
In digital imaging, this technique is used to create a low fidelity appearance in the picture.
To give a photo a 'retro' look - that it was made with an old camera or lens - one could add an obvious 'vignette' using 'lens correction' or burning in margins by any of several techniques.
There is a much more general use.
Viewers' eyes are attracted to brightness so if the areas to the corners or edges are brighter than the desired center of interest, eyes may wander towards that brightness. To direct the viewers' attention, the bright corners or margins are barely perceptibly darkened. This darkening 'fences off' the bright area and keeps the viewer's eyes where the photographer wants.
The object is to keep the view inside the image but, at the same time, not be obvious.
