Unlike most radio jammers, deauthentication acts in a unique way. The IEEE 802.11 (Wi-Fi) protocol contains the provision for a deauthentication frame. Sending the frame from the access point to a station is called a "sanctioned technique to inform a rogue station that they have been disconnected from the network".[1]
An attacker can send a deauthentication frame at any time to a wireless access point, with a spoofed address for the victim. The protocol does not require any encryption for this frame, even when the session was established with Wired Equivalent Privacy (WEP), WPAorWPA2 for data privacy, and the attacker only needs to know the victim's MAC address, which is available in the clear through wireless network sniffing.[2][3]
One of the main purposes of deauthentication used in the hacking community is to force clients to connect to an evil twin access point which then can be used to capture network packets transferred between the client and the access point.
The attacker conducts a deauthentication attack to the target client, disconnecting it from its current network, thus allowing the client to automatically connect to the evil twin access point.
In order to mount a brute-forceordictionary based WPA password cracking attack on a Wi‑Fi user with WPA or WPA2 enabled, a hacker must first sniff the WPA 4-way handshake. The user can be elicited to provide this sequence by first forcing them offline with the deauthentication attack.[4]
The Federal Communications Commission has fined hotels and other companies for launching deauthentication attacks on their own guests; the purpose being to drive them off their own personal hotspots and force them to pay for on-site Wi-Fi services.[5][6][7][8][9]
Aircrack-ng suite, MDK3, Void11, Scapy, and Zulu software can mount a Wi‑Fi deauthentication attack.[10] Aireplay-ng, an aircrack-ng suite tool, can run a deauthentication attack by executing a one-line command:
aireplay-ng -0 1 -a xx:xx:xx:xx:xx:xx -c yy:yy:yy:yy:yy:yy wlan0
-0 arms deauthentication attack mode
1 is the number of deauths to send; use 0 for infinite deauths
-a xx:xx:xx:xx:xx:xx is the AP (access point) MAC (Media Access Control) address
-c yy:yy:yy:yy:yy:yy is the target client MAC address; omit to deauthenticate all clients on AP
^Order and consent decree — In the Matter of SMART CITY HOLDINGS, LLC(PDF), Federal Communications Commission, August 18, 2015, DA 15-917, The complaint charged that its customers could not connect to the Internet using the complainant's equipment at several venues where Smart City operates or manages the Wi-Fi access. Specifically, the complainant alleged that Smart City transmitted deauthentication frames to prevent the complainant's customers' use of their Wi-Fi equipment. ... Smart City's responses [to FCC Letters of Inquiry] revealed that, at several venues where it managed or operated Wi-Fi systems, it automatically transmitted deauthentication frames to prevent Wi-Fi users whose devices produced a received signal strength above a preset power level at Smart City access points from establishing or maintaining a Wi-Fi network independent of Smart City's network.
Nguyen, Thuc D.; Nguyen, Duc H. M.; Tran, Bao N.; Vu, Hai; Mittal, Neeraj (August 2008), "A Lightweight Solution for Defending against Deauthentication/Disassociation Attacks on 802.11 Networks", Proceedings of the 17th IEEE International Conference on Computer Communications and Networks (ICCCN), St. Thomas, Virgin Islands, USA, pp. 185–190, CiteSeerX10.1.1.310.1319, doi:10.1109/ICCCN.2008.ECP.51, ISBN978-1-4244-2389-7, S2CID14833574(subscription required)
