Contents

ZF EcoLife

Model of automatic transmission

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages) This article contains content that is written like an advertisement. Please help improve it by removing promotional content and inappropriate external links, and by adding encyclopedic content written from a neutral point of view. (September 2011) (Learn how and when to remove this message) This article relies excessively on referencestoprimary sources. Please improve this article by adding secondary or tertiary sources. Find sources: "ZF EcoLife" – news · newspapers · books · scholar · JSTOR (August 2023) (Learn how and when to remove this message) This article may contain excessive or inappropriate references to self-published sources. Please help improve it by removing references to unreliable sources where they are used inappropriately. (August 2023) (Learn how and when to remove this message) (Learn how and when to remove this message)

The ZF EcoLife transmission is a planetary transmission for medium-capacity applications with rapid speed variation, such as city buses, motor cranes, tanks and diesel commuter rail, designed by ZF Friedrichshafen. It features boosted operating economy, longer service life, and higher temperature resistance for operation with Euro 3-6 compatible engines, compared to ZF Ecomat. It also boasts an integral retarder, longer operational intervals between oil changes, higher torque capacity, and "Dynamic, topography-dependent drive program selection" among others.^[1]

The ZF Ecolife has been in manufacturing since 2007, parallel to the ZF Ecomat until 2016.

The 2 digits after the AP designation indicate how much torque the open channel can withstand (unit is x100 Nm, for example, 6AP14__ = upper limit of torque of 1400Nm) The 3rd digit after the AP designation indicates the generation, 0 for first generation and 2 for the second generation. The last digit denotes the mounting position, and can be 0 or 1.

ZF developed a new generation of EcoLife as a response to increase of engine power density and increasing vehicle speeds.

Named the EcoLife 2, ZF claims fuel savings of 3% over the 1st generation. Weight savings of approximately 20 kg have been achieved. Additionally, it supports engine start-stop systems.^[2]

The ZF EcoLife 2 has different ratings between 1000 N⋅m (6AP1020B) and 3000 N⋅m (7AP3020S). The 6th gear's ratio has changed from 0.615 to 0.59 (in on-highway units).

ZF EcoLife 1

ZF EcoLife 2

ZF EcoLife Off-Road

• 6AP1000B/C - Max Input Torque: 1,000 newton-metres (738 lbf⋅ft)
• 6AP1200B/C - Max Input Torque: 1,200 newton-metres (885 lbf⋅ft)
• 6AP1400B/C - Max Input Torque: 1,400 newton-metres (1,033 lbf⋅ft)
• 6AP1600BS - Max Input Torque: 1,600 newton-metres (1,180 lbf⋅ft)
• 6AP1700B/C - Max Input Torque: 1,700 newton-metres (1,254 lbf⋅ft)
• 6AP1900 SP - Max Input Torque: 1,900 newton-metres (1,401 lbf⋅ft)
• 6AP2000B/C - Max Input Torque: 2,000 newton-metres (1,475 lbf⋅ft)
• 6AP2100B/C - Max Input Torque: 2,100 newton-metres (1,549 lbf⋅ft)
• 6AP2300B - Max Input Torque: 2,300 newton-metres (1,696 lbf⋅ft)
• 7AP2600 - Max Input Torque: 2,600 newton-metres (1,918 lbf⋅ft)

• 6AP1020B - Max Input Torque: 1,000 newton-metres (738 lbf⋅ft)
• 6AP1220B - Max Input Torque: 1,200 newton-metres (885 lbf⋅ft)
• 6AP1420B - Max Input Torque: 1,400 newton-metres (1,033 lbf⋅ft)
• 6AP1620B/S - Max Input Torque: 1,600 newton-metres (1,180 lbf⋅ft)
• 6AP1720B - Max Input Torque: 1,700 newton-metres (1,254 lbf⋅ft)
• 6AP2020B - Max Input Torque: 2,000 newton-metres (1,475 lbf⋅ft)
• 6AP2120B - Max Input Torque: 2,100 newton-metres (1,549 lbf⋅ft)
• 6AP2320B/S - Max Input Torque: 2,300 newton-metres (1,696 lbf⋅ft)
• 6AP2520B - Max Input Torque: 2,500 newton-metres (1,844 lbf⋅ft)
• 6AP2820B - Max Input Torque: 2,800 newton-metres (2,065 lbf⋅ft)
• 7AP3020S - Max Input Torque: 3,000 newton-metres (2,213 lbf⋅ft)