Fluoroform, or trifluoromethane, is the chemical compound with the formula CHF3. It is a hydrofluorocarbon as well as being a part of the haloforms, a class of compounds with the formula CHX3 (X = halogen) with C3v symmetry. Fluoroform is used in diverse applications in organic synthesis. It is not an ozone depleter but is a greenhouse gas.[2]
| |||
| Names | |||
|---|---|---|---|
| IUPAC name
Trifluoromethane | |||
| Other names
Fluoroform, carbon trifluoride,[citation needed] methyl trifluoride, Fluoryl, Freon 23, Arcton 1 | |||
| Identifiers | |||
| |||
3D model (JSmol) |
|||
| Abbreviations | HFC 23, R-23, FE-13, UN 1984 | ||
| ChEBI | |||
| ChemSpider |
| ||
| ECHA InfoCard | 100.000.794 
| ||
| EC Number |
| ||
PubChem CID |
|||
| RTECS number |
| ||
| UNII | |||
CompTox Dashboard (EPA) |
|||
| |||
| |||
| Properties | |||
| CHF3 | |||
| Molar mass | 70.014 g·mol−1 | ||
| Appearance | Colorless gas | ||
| Density | 2.946 kg/m3 (gas, 1 bar, 15 °C) | ||
| Melting point | −155.2 °C (−247.4 °F; 118.0 K) | ||
| Boiling point | −82.1 °C (−115.8 °F; 191.1 K) | ||
| 1 g/l | |||
| Solubility in organic solvents | Soluble | ||
| Vapor pressure | 4.38 MPa at 20 °C | ||
Henry's law |
0.013 mol·kg−1·bar−1 | ||
| Acidity (pKa) | 25–28 | ||
| Structure | |||
| Tetrahedral | |||
| Hazards | |||
| Occupational safety and health (OHS/OSH): | |||
Main hazards |
Nervous system depression | ||
| GHS labelling:[1] | |||
| |||
| Warning | |||
| H280 | |||
| P403 | |||
| NFPA 704 (fire diamond) | |||
| Flash point | Non-flammable | ||
| Related compounds | |||
Related compounds |
| ||
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |||
About 20 million kg per year are produced industrially as both a by-product of and precursor to the manufacture of Teflon.[2] It is produced by reaction of chloroform with HF:[3]
It is also generated biologically in small amounts apparently by decarboxylationoftrifluoroacetic acid.[4]
Fluoroform was first obtained by Maurice Meslans in the violent reaction of iodoform with dry silver fluoride in 1894.[5] The reaction was improved by Otto Ruff by substitution of silver fluoride by a mixture of mercury fluoride and calcium fluoride.[6] The exchange reaction works with iodoform and bromoform, and the exchange of the first two halogen atoms by fluorine is vigorous. By changing to a two step process, first forming a bromodifluoromethane in the reaction of antimony trifluoride with bromoform and finishing the reaction with mercury fluoride the first efficient synthesis method was found by Henne.[6]
CHF3 is used in the semiconductor industryinplasma etchingofsilicon oxide and silicon nitride. Known as R-23 or HFC-23, it was also a useful refrigerant, sometimes as a replacement for chlorotrifluoromethane (CFC-13) and is a byproduct of its manufacture.
When used as a fire suppressant, the fluoroform carries the DuPont trade name, FE-13. CHF3 is recommended for this application because of its low toxicity, its low reactivity, and its high density. HFC-23 has been used in the past as a replacement for Halon 1301(CFC-13B1) in fire suppression systems as a total flooding gaseous fire suppression agent.
Fluoroform is weakly acidic with a pKa = 25–28 and quite inert. Attempted deprotonation results in defluorination to generate F− and difluorocarbene (CF2). Some organocopper and organocadmium compounds have been developed as trifluoromethylation reagents.[7]
Fluoroform is a precursor of the Ruppert-Prakash reagent CF3Si(CH3)3, which is a source of the nucleophilic CF−3 anion.[8][9]
CHF3 is a potent greenhouse gas. A ton of HFC-23 in the atmosphere has the same effect as 11,700 tons of carbon dioxide. This equivalency, also called a 100-yr global warming potential, is slightly larger at 14,800 for HFC-23.[10] The atmospheric lifetime is 270 years.[10]
HFC-23 was the most abundant HFC in the global atmosphere until around 2001, when the global mean concentration of HFC-134a (1,1,1,2-tetrafluoroethane), the chemical now used extensively in automobile air conditioners, surpassed those of HFC-23. Global emissions of HFC-23 have in the past been dominated by the inadvertent production and release during the manufacture of the refrigerant HCFC-22 (chlorodifluoromethane).
Substantial decreases in HFC-23 emissions by developed countries were reported from the 1990s to the 2000s: from 6-8 Gg/yr in the 1990s to 2.8 Gg/yr in 2007.[11]
The UNFCCC Clean Development Mechanism provided funding and facilitated the destruction of HFC-23.
Developing countries have become the largest producers of HCFC-23 in recent years according to data compiled by the Ozone Secretariat of the World Meteorological Organization.[12][13][14] Emissions of all HFCs are included in the UNFCCCs Kyoto Protocol. To mitigate its impact, CHF3 can be destroyed with electric plasma arc technologies or by high temperature incineration.[15]
| Property | Value |
|---|---|
| Density (ρ) at -100 °C (liquid) | 1.52 g/cm3 |
| Density (ρ) at -82.1 °C (liquid) | 1.431 g/cm3 |
| Density (ρ) at -82.1 °C (gas) | 4.57 kg/m3 |
| Density (ρ) at 0 °C (gas) | 2.86 kg/m3 |
| Density (ρ) at 15 °C (gas) | 2.99 kg/m3 |
| Dipole moment | 1.649 D |
| Critical pressure (pc) | 4.816 MPa (48.16 bar) |
| Critical temperature (Tc) | 25.7 °C (299 K) |
| Critical density (ρc) | 7.52 mol/l |
| Compressibility factor (Z) | 0.9913 |
| Acentric factor (ω) | 0.26414 |
| Viscosity (η) at 25 °C | 14.4 μPa.s (0.0144 cP) |
| Molar specific heat at constant volume (CV) | 51.577 J.mol−1.K−1 |
| Latent heat of vaporization (lb) | 257.91 kJ.kg−1 |
