The standards are protected by copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC 1) have been made freely and publicly available.[2]
ISO/IEC 10026-5:1998 Part 5: Application context proforma and guidelines when using OSI TP
ISO/IEC 10026-6:1995 Part 6: Unstructured Data Transfer
ISO/IEC 10027:1990 Information technology – Information Resource Dictionary System (IRDS) framework
ISO/IEC 10028:1993 Information technology – Telecommunications and information exchange between systems – Definition of the relaying functions of a Network layer intermediate system
ISO/IEC 10030:1995 Information technology – Telecommunications and information exchange between systems – End System Routing Information Exchange Protocol for use in conjunction with ISO/IEC 8878
ISO/IEC TR 10032:2003 Information technology – Reference Model of Data Management
ISO/IEC TR 10034:1990 Guidelines for the preparation of conformity clauses in programming language standards
ISO/IEC 10035 Information technology – Open Systems Interconnection – Connectionless protocol for the Association Control Service Element
ISO/IEC 10165-5:1994 Generic management information
ISO/IEC 10165-6:1997 Requirements and guidelines for implementation conformance statement proformas associated with OSI management
ISO/IEC 10165-7:1996 General relationship model
ISO/IEC 10165-8:2000 Managed objects for supporting upper layers
ISO/IEC 10165-9:2000 Systems management application layer managed objects
ISO/IEC 10166 Information technology – Text and office systems – Document Filing and Retrieval (DFR)
ISO/IEC 10166-1:1991 Part 1: Abstract service definition and procedures
ISO/IEC 10166-2:1991 Part 2: Protocol specification
ISO/IEC TR 10171:2000 Information technology – Telecommunications and information exchange between systems – List of standard data link layer protocols that utilize high-level data link control (HDLC) classes of procedures, list of standard XID format identifiers, list of standard mode-setting information field format identifiers, and list of standard user-defined parameter set identification values
ISO/IEC 10173:1998 Information technology – Telecommunications and information exchange between systems – Interface connector and contact assignments for ISDN primary rate access connector located at reference points S and T
ISO/IEC 10175 Information technology – Text and office systems – Document Printing Application (DPA)
ISO/IEC 10175-1:1996 Part 1: Abstract service definition and procedures
ISO/IEC 10175-2:1996 Part 2: Protocol specification
ISO/IEC 10175-3:2000 Part 3: Management abstract service definitions and procedures
ISO/IEC TR 10176:2003 Information technology - Guidelines for the preparation of programming language standards
ISO/IEC 10177:1993 Information technology – Telecommunications and information exchange between systems – Provision of the connection-mode Network internal layer service by intermediate systems using ISO/IEC 8208, the X.25 Packet Layer Protocol
ISO/IEC 10180:1995 Information technology - Processing languages - Standard Page Description Language (SPDL)
ISO/IEC 10181 Information technology - Open Systems Interconnection - Security frameworks for open systems
ISO/IEC 10181-1:1996 Overview
ISO/IEC 10181-2:1996 Authentication framework
ISO/IEC 10181-3:1996 Access control framework
ISO/IEC 10181-4:1997 Non-repudiation framework
ISO/IEC 10181-5:1996 Confidentiality framework
ISO/IEC 10181-6:1996 Integrity framework
ISO/IEC 10181-7:1996 Security audit and alarms framework
ISO/IEC TR 10182:2016 Information technology - Programming languages, their environments and system software interfaces - Guidelines for language bindings
ISO/IEC TR 10183 Information technology – Text and office systems – Office Document Architecture (ODA) and interchange format – Technical Report on ISO 8613 implementation testing
ISO/IEC TR 10183-1:1993 Part 1: Testing methodology
ISO/IEC TR 10183-2:1993 Part 2: Framework for abstract test cases
ISO/IEC 10192 Information technology - Home Electronic System (HES) interfaces
ISO/IEC 10192-1:2002 Part 1: Universal Interface (UI) Class 1
ISO/IEC TR 10192-2:2000 Part 2: Simple Interfaces Type 1
ISO/IEC 10206:1991 Information technology – Programming languages – Extended Pascal
ISO 10209:2012 Technical product documentation - Vocabulary - Terms relating to technical drawings, product definition and related documentation
ISO 10211Thermal bridges in building construction – Heat flows and surface temperatures – Detailed calculations
ISO 10218 Robots and robotic devices – Safety requirements for industrial robots
ISO 10241 Terminological entries in standards
ISO 10241-1:2011 Part 1: General requirements and examples of presentation
ISO 10241-2:2012 Part 2: Adoption of standardized terminological entries
ISO 10243:2010 Tools for pressing – Compression springs with rectangular section – Housing dimensions and colour coding
ISO 10244:2010 Document management - Business process baselining and analysis
ISO 10254:2016 Air cargo and ground equipment – Vocabulary
ISO/TR 10255:2009 Document management applications - Optical disk storage technology, management and standards
ISO 10263 Earth-moving machinery – Operator enclosure environment
ISO 10263-1:2009 Part 1: Terms and definitions
ISO 10265:2008 Earth-moving machinery - Crawler machines - Performance requirements and test procedures for braking systems
ISO 10272 Microbiology of the food chain – Horizontal method for detection and enumeration of Campylobacter spp.
ISO 10272-1:2017 Part 1: Detection method
ISO 10272-2:2017 Part 2: Colony-count technique
ISO 10273:2017 Microbiology of the food chain - Horizontal method for the detection of pathogenic Yersinia enterocolitica
ISO/IEC 10279:1991 Information technology – Programming languages – Full BASIC
ISO 10284:1997 Cinematography - Graphical symbols - Description
ISO 10286:2015 Gas cylinders - Terminology
ISO 10302 Acoustics – Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices
ISO 10302-1:2011 Part 1: Airborne noise measurement
ISO 10302-2:2011 Part 2: Structure-borne vibration measurements
ISO 10303 Industrial automation systems and integration – Product data representation and exchange
ISO 10316:1990 Shipbuilding — Class B magnetic compasses — Tests and certification [Withdrawn: replaced by ISO 25862]
ISO 10386:1994 Ferroboron - Specification and conditions of delivery
ISO 10387:1994 Metal chrome - Specification and conditions of delivery
ISO 10393:2013 Consumer product recall – Guidelines for suppliers
ISO 10456 Building materials and products – Hygrothermal properties – Tabulated design values and procedures for determining declared and design thermal values
ISO 10487 Passenger cars – Connections for car radios[Note 3]
ISO 10494:1993 Gas turbines and gas turbine sets – Measurement of emitted airborne noise – Engineering/survey method
ISO/IEC 10514 Information technology - Programming languages
ISO/IEC 10514-1:1996 Part 1: Modula-2, Base Language
ISO/IEC 10514-2:1998 Part 2: Generics Modula-2
ISO/IEC 10514-3:1998 Part 3: Object Oriented Modula-2
ISO 10524 Pressure regulators for use with medical gases
ISO 10524-1:2006 Part 1: Pressure regulators and pressure regulators with flow-metering devices
ISO 10524-2:2005 Part 2: Manifold and line pressure regulators
ISO 10524-3:2005 Part 3: Pressure regulators integrated with cylinder valves
ISO 10524-4:2008 Part 4: Low-pressure regulators
ISO 10534 Acoustics – Determination of sound absorption coefficient and impedance in impedance tubes
ISO 10534-1:1996 Part 1: Method using standing wave ratio
ISO/IEC 10536-1:2000 Part 1: Physical characteristics
ISO/IEC 10536-2:1995 Part 2: Dimensions and location of coupling areas
ISO/IEC 10536-3:1996 Part 3: Electronic signals and reset procedures
ISO/IEC 10538:1991 Information technology - Control functions for text communication
ISO 10555 Intravascular catheters – Sterile and single-use catheters
ISO 10555-1:2013 Part 1: General requirements
ISO 10555-3:2013 Part 3: Central venous catheters
ISO 10555-4:2013 Part 4: Balloon dilatation catheters
ISO 10555-5:2013 Part 5: Over-needle peripheral catheters
ISO 10555-6:2015 Part 6: Subcutaneous implanted ports
ISO/IEC 10561:1999 Information technology - Office equipment - Printing devices - Method for measuring throughput - Class 1 and Class 2 printers
ISO 10567:2007 Earth-moving machinery - Hydraulic excavators - Lift capacity
ISO 10576 Statistical methods - Guidelines for the evaluation of conformity with specified requirements
ISO 10576-1:2003 Part 1: General principles
ISO 10579:2010 Geometrical product specifications (GPS) – Dimensioning and tolerancing – Non-rigid parts
ISO 10585:1996 Information and documentation - Armenian alphabet coded character set for bibliographic information interchange
ISO 10586:1996 Information and documentation - Georgian alphabet coded character set for bibliographic information interchange
ISO/IEC 10588:1993 Information technology – Use of X.25 Packet Layer Protocol in conjunction with X.21/X.21 bis to provide the OSI connection-mode Network Service
ISO/IEC 10589:2002 Information technology – Telecommunications and information exchange between systems – Intermediate System to Intermediate System intra-domain routeing information exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO 8473)
ISO 10625:2005 Equipment for crop protection – Sprayer nozzles – Colour coding for identification
ISO 10651 Lung ventilators for medical use – Particular requirements for basic safety and essential performance[Note 3]
ISO 10651-1:1993 Part 1: Requirements
ISO 10651-2:1996 Part 2: Particular requirements for home care ventilators
ISO 10651-3:1997 Part 3: Particular requirements for emergency and transport ventilators
ISO 10651-4:2002 Part 4: Particular requirements for operator-powered resuscitators
ISO 10651-5:2006 Part 5: Gas-powered emergency resuscitators
ISO 10651-6:2004 Part 6: Home-care ventilatory support devices
ISO 10656:2016 Resistance welding equipment – Transformers – Integrated transformers for welding guns
ISO 10664 Hexalobular internal driving feature for bolts and screws – Torx screw head
ISO 10667 Assessment service delivery – Procedures and methods to assess people in work and organizational settings
ISO 10667-1:2011 Part 1: Requirements for the client
ISO 10667-2:2011 Part 2: Requirements for service providers
ISO 10668:2010 Brand valuation - Requirements for monetary brand valuation
ISO 10685 Ophthalmic optics – Spectacle frames and sunglasses electronic catalogue and identification
ISO 10685-1:2011 Part 1: Product identification and electronic catalogue product hierarchy
ISO 10685-2:2016 Part 2: Commercial information
ISO 10685-3:2012 Part 3: Technical information
ISO 10703:2007 Water quality - Determination of the activity concentration of radionuclides - Method by high resolution gamma-ray spectrometry
ISO 10705 Water quality – Detection and enumeration of bacteriophages
ISO 10705-1:1995 Part 1: Enumeration of F-specific RNA bacteriophages
ISO 10705-2:2000 Part 2: Enumeration of somatic coliphages
ISO 10705-3:2003 Part 3: Validation of methods for concentration of bacteriophages from water
ISO 10705-4:2001 Part 4: Enumeration of bacteriophages infecting Bacteroides fragilis
ISO 10711:2012 Intelligent Transport Systems – Interface Protocol and Message Set Definition between Traffic Signal Controllers and Detectors
ISO 10718:2015 Cork stoppers – Characterization of a low-in-germs stopper, through the enumeration of colony-forming units of yeasts, moulds and bacteria, capable of both being extracted and growing in alcoholic medium
ISO 10725:2000 Acceptance sampling plans and procedures for the inspection of bulk materials
ISO/IEC 10728:1993 Information technology – Information Resource Dictionary System (IRDS) Services Interface
ISO/IEC 10731:1994 Information technology - Open Systems Interconnection - Basic Reference Model - Conventions for the definition of OSI services
ISO/IEC 10732:1993 Information technology – Use of X.25 Packet Layer Protocol to provide the OSI connection-mode Network Service over the telephone network
ISO/IEC 10733:1998 Information technology – Elements of management information related to the OSI Network Layer
ISO/IEC 10736:1995 Information technology – Telecommunications and information exchange between systems – Transport layer security protocol
ISO/IEC 10737:1998 Information technology – Elements of management information related to OSI Transport layer
ISO/IEC 10741 Information technology – User system interfaces – Dialogue interaction
ISO/IEC 10741-1:1995 Part 1: Cursor control for text editing
ISO/IEC 10742:1994 Information technology – Telecommunications and information exchange between systems – Elements of management information related to OSI Data Link Layer standards
ISO/IEC 10744:1997 Information technology - Hypermedia/Time-based Structuring Language (HyTime)
ISO/IEC 10745:1995 Information technology - Open Systems Interconnection - Upper layers security model
ISO/IEC 10746 Information technology—Open Distributed Processing—Reference model
ISO/IEC 10746-1:1998 Overview
ISO/IEC 10746-2:2009 Foundations
ISO/IEC 10746-3:2009 Architecture
ISO/IEC 10746-4:1998 Architectural semantics
ISO/IEC 10747:1994 Information technology – Telecommunications and information exchange between systems – Protocol for exchange of inter-domain routeing information among intermediate systems to support forwarding of ISO 8473 PDUs
ISO 10754:1996 Information and documentation - Extension of the Cyrillic alphabet coded character set for non-Slavic languages for bibliographic information interchange
ISO/IEC 10779:2008 Information technology – Office equipment accessibility guidelines for elderly persons and persons with disabilities
ISO/HL7 10781:2015 Health Informatics – HL7 Electronic Health Records-System Functional Model, Release 2 (EHR FM)
ISO 10782 Definitions and attributes of data elements for control and monitoring of textile processes
ISO 10782-1:1998 Part 1: Spinning, spinning preparatory and related processes
ISO 10790:2015 Measurement of fluid flow in closed conduits – Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
ISO 10795:2011 Space systems – Programme management and quality – Vocabulary
ISO/TS 10797:2012 Nanotechnologies – Characterization of single-wall carbon nanotubes using transmission electron microscopy
ISO/TS 10798:2011 Nanotechnologies – Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
ISO 10801:2010 Nanotechnologies – Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method
ISO 10807:1994 Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmospheres
ISO 10808:2010 Nanotechnologies – Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing
ISO/TS 10811 Mechanical vibration and shock – Vibration and shock in buildings with sensitive equipment
ISO/TS 10811-1:2000 Part 1: Measurement and evaluation
ISO/TS 10811-2:2000 Part 2: Classification
ISO 10813 Vibration generating machines – Guidance for selection
ISO 10813-1:2004 Part 1: Equipment for environmental testing
ISO 10815:2016 Mechanical vibration – Measurement of vibration generated internally in railway tunnels by the passage of trains
ISO 10816 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts
ISO 10816-1:1995 Part 1: General guidelines
ISO 10816-2:2009 Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
ISO 10816-3:2009 Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
ISO 10816-4:2009 Part 4: Gas turbine sets with fluid-film bearings
ISO 10816-5:2000 Part 5: Machine sets in hydraulic power generating and pumping plants
ISO 10816-6:1995 Part 6: Reciprocating machines with power ratings above 100 kW
ISO 10816-7:2009 Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts
ISO 10816-8:2014 Part 8: Reciprocating compressor systems
ISO 10816-21:2015 Part 21: Horizontal axis wind turbines with gearbox
ISO 10817 Rotating shaft vibration measuring systems
ISO 10817-1:1998 Part 1: Relative and absolute sensing of radial vibration
ISO 10825:1995 Gears - Wear and damage to gear teeth - Terminology
ISO 10843:1997 Acoustics – Methods for the description and physical measurement of single impulses or series of impulses
ISO 10844:2014 Acoustics – Specification of test tracks for measuring noise emitted by road vehicles and their tyres
ISO 10846 Acoustics and vibration – Laboratory measurement of vibro-acoustic transfer properties of resilient elements
ISO 10846-1:2008 Part 1: Principles and guidelines
ISO 10846-2:2008 Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
ISO 10846-3:2002 Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
ISO 10846-4:2003 Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
ISO 10846-5:2008 Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
ISO 10847:1997 Acoustics – In-situ determination of insertion loss of outdoor noise barriers of all types
ISO/IEC 10859:1997 Information technology - 8-bit backplane interface: STEbus and mechanical core specifications for microcomputers
ISO/IEC 10861:1994 Information technology - Microprocessor systems - High-performance synchronous 32-bit bus: MULTIBUS II
ISO/TS 10867:2010 Nanotechnologies – Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
ISO/TS 10868:2017 Nanotechnologies – Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
ISO 10878:2013 Non-destructive testing - Infrared thermography - Vocabulary
ISO/IEC 10885:1993 Information technology - 356 mm optical disk cartridge for information interchange - Write once
ISO/IEC 10918 Information technology - Digital compression and coding of continuous-tone still images
ISO/TS 10974:2012 Assessment of the safety of magnetic resonance imaging for patients with an active implantable medical device
ISO 10985:2009 Caps made of aluminium-plastics combinations for infusion bottles and injection vials – Requirements and test methods
ISO 10991:2009 Micro process engineering – Vocabulary
ISO/TR 10992:2011 Intelligent transport systems – Use of nomadic and portable devices to support ITS service and multimedia provision in vehicles
ISO 10993 Biological evaluation of medical devices
ISO/IEC 10994:1992 Information technology – Data interchange on 90 mm flexible disk cartridges using modified frequency modulation recording at 31 831 ftprad on 80 tracks on each side – ISO Type 303
ISO/IEC 10995:2011 Information technology - Digitally recorded media for information interchange and storage - Test method for the estimation of the archival lifetime of optical media
ISO 11091:1994 Construction drawings – Landscape drawing practice
ISO 11095:1996 Linear calibration using reference materials
ISO 11107:2009 Recreational diving services – Requirements for training programmes on enriched air nitrox (EAN) diving
ISO 11108:1996 Information and documentation - Archival paper - Requirements for permanence and durability
ISO 11117:2008 Gas cylinders – Valve protection caps and valve guards – Design, construction and tests
ISO 11120 Gas cylinders - Refillable seamless steel tubes of water capacity between 150 L and 3000 L - Design, construction and testing
ISO 11121:2017 Recreational diving services – Requirements for introductory programmes to scuba diving
ISO 11124 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives
ISO 11124-1:1993 Part 1: General introduction and classification
ISO 11124-2:1993 Part 2: Chilled-iron grit
ISO 11124-3:1993 Part 3: High-carbon cast-steel shot and grit
ISO 11124-4:1993 Part 4: Low-carbon cast-steel shot
ISO 11125 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives
ISO 11125-1:1993 Part 1: Sampling
ISO 11125-2:1993 Part 2: Determination of particle size distribution
ISO 11125-3:1993 Part 3: Determination of hardness
ISO 11125-4:1993 Part 4: Determination of apparent density
ISO 11125-5:1993 Part 5: Determination of percentage defective particles and of microstructure
ISO 11125-6:1993 Part 6: Determination of foreign matter
ISO 11125-7:1993 Part 7: Determination of moisture
ISO 11126 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives
ISO 11126-1:1993 Part 1: General introduction and classification
ISO 11126-3:1993 Part 3: Copper refinery slag
ISO 11126-4:1993 Part 4: Coal furnace slag
ISO 11126-5:1993 Part 5: Nickel refinery slag
ISO 11126-6:1993 Part 6: Iron furnace slag
ISO 11126-7:1995 Part 7: Fused aluminium oxide
ISO 11126-8:1993 Part 8: Olivine sand
ISO 11126-9:1999 Part 9: Staurolite
ISO 11126-10:2000 Part 10: Almandite garnet
ISO 11127 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives
ISO 11127-1:2011 Part 1: Sampling
ISO 11127-2:2011 Part 2: Determination of particle size distribution
ISO 11127-3:2011 Part 3: Determination of apparent density
ISO 11127-4:2011 Part 4: Assessment of hardness by a glass slide test
ISO 11127-5:2011 Part 5: Determination of moisture
ISO 11127-6:2011 Part 6: Determination of water-soluble contaminants by conductivity measurement
ISO 11127-7:2011 Part 7: Determination of water-soluble chlorides
ISO 11133:2014 Microbiology of food, animal feed and water – Preparation, production, storage and performance testing of culture media
ISO 11135:2014 Sterilization of health-care products—Ethylene oxide—Requirements for the development, validation and routine control of a sterilization process for medical devices
ISO 11137 Sterilization of health care products – Radiation
ISO 11138 Sterilization of health care products - Biological indicators
ISO 11138-1:2017 Part 1: General requirements
ISO 11138-2:2017 Part 2: Biological indicators for ethylene oxide sterilization processes
ISO 11138-3:2017 Part 3: Biological indicators for moist heat sterilization processes
ISO 11138-4:2017 Part 4: Biological indicators for dry heat sterilization processes
ISO 11138-5:2017 Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes
ISO/TS 11139:2006 Sterilization of health care products - Vocabulary
ISO 11145:2016 Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols
ISO 11146 Lasers and laser-related equipment – Test methods for laser beam widths, divergence angles and beam propagation ratios
ISO 11146-1:2005 Part 1: Stigmatic and simple astigmatic beams
ISO 11146-2:2005 Part 2: General astigmatic beams
ISO/TR 11146-3:2004 Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods
ISO 11151 Lasers and laser-related equipment – Standard optical components
ISO 11151-1:2015 Part 1: Components for the UV, visible and near-infrared spectral ranges
ISO 11151-2:2015 Part 2: Components for the infrared spectral range
ISO 11156:2011 Packaging - Accessible design - General requirements
ISO/IEC 11160 Information technology - Office equipment - Minimum information to be included in specification sheets - Printers
ISO/IEC 11160-1:1996 Part 1: Class 1 and Class 2 printers
ISO/IEC 11160-2:2013 Part 2: Class 3 and Class 4 printers
ISO 11170:2003 Hydraulic fluid power – Filter elements – Sequence of tests for verifying performance characteristics
ISO 11171:2010 Hydraulic fluid power – Calibration of automatic particle counters for liquids
ISO/IEC 11172 Information technology – Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s
ISO 11195:1995 Gas mixers for medical use – Stand-alone gas mixers
ISO 11197:2016 Medical supply units
ISO 11200:2014 Acoustics – Noise emitted by machinery and equipment – Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
ISO 11201:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
ISO 11202:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
ISO 11203:1995 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
ISO 11204:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
ISO 11205:2003 Acoustics – Noise emitted by machinery and equipment – Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
ISO/TR 11219:2012 Information and documentation - Qualitative conditions and basic statistics for library buildings - Space, function and design
ISO 11224:2003 Textiles – Web formation and bonding in nonwovens – Vocabulary
ISO 11238:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated information on substances
ISO 11239:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated information on pharmaceutical dose forms, units of presentation, routes of administration and packaging
ISO 11240:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of units of measurement
ISO/TS 11251:2010 Nanotechnologies – Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry
ISO 11252:2013 Lasers and laser-related equipment – Laser device – Minimum requirements for documentation
ISO 11270:2014 Intelligent transport systems – Lane keeping assistance systems (LKAS) – Performance requirements and test procedures
ISO 11290 Microbiology of the food chain - Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp.
ISO 11290-1:2017 Part 1: Detection method
ISO 11290-2:2017 Part 2: Enumeration method
ISO/TS 11308:2011 Nanotechnologies – Characterization of single-wall carbon nanotubes using thermogravimetric analysis
ISO 11318:2002 Cardiac defibrillators – Connector assembly DF-1 for implantable defibrillators – Dimensions and test requirements
ISO/IEC 11319:1993 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording
ISO/IEC 11321:1992 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DATA/DAT format
ISO 11323:2010 Iron ore and direct reduced iron – Vocabulary
ISO/TR 11328:1994 Measurement of liquid flow in open channels – Equipment for the measurement of discharge under ice conditions
ISO 11329:2001 Hydrometric determinations – Measurement of suspended sediment transport in tidal channels
ISO/IEC 11411:1995 Information technology - Representation for human communication of state transition of software
ISO 11418 Containers and accessories for pharmaceutical preparations
ISO 11418-1:2016 Part 1: Drop-dispensing glass bottles
ISO 11418-2:2016 Part 2: Screw-neck glass bottles for syrups
ISO 11418-3:2016 Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms
ISO 11418-5:2015 Part 5: Dropper assemblies
ISO 11418-7:2016 Part 7: Screw-neck vials made of glass tubing for liquid dosage forms
ISO 11421:1997 Optics and optical instruments - Accuracy of optical transfer function (OTF) measurement
ISO 11442:2006 Technical product documentation – Document management
ISO 11446:2004 Road vehicles – Connectors for the electrical connection of towing and towed vehicles – 13-pole connectors for vehicles with 12 V nominal supply voltage
ISO 11450:1999 Equipment for harvesting and conservation – Round balers – Terminology and commercial specifications
ISO 11451 Road vehicles – Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy
ISO 11451-1:2015 Part 1: General principles and terminology
ISO 11451-2:2015 Part 2: Off-vehicle radiation sources
ISO 11451-3:2015 Part 3: On-board transmitter simulation
ISO 11451-4:2013 Part 4: Bulk current injection (BCI)
ISO 11452 Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy
ISO 11452-1:2015 Part 1: General principles and terminology
ISO 11452-2:2004 Part 2: Absorber-lined shielded enclosure
ISO 11452-3:2016 Part 3: Transverse electromagnetic (TEM) cell
ISO 11452-4:2011 Part 4: Harness excitation methods
ISO 11452-5:2002 Part 5: Stripline
ISO 11452-7:2003 Part 7: Direct radio frequency (RF) power injection
ISO 11452-8:2015 Part 8: Immunity to magnetic fields
ISO 11452-9:2012 Part 9: Portable transmitters
ISO 11452-10:2009 Part 10: Immunity to conducted disturbances in the extended audio frequency range
ISO 11452-11:2010 Part 11: Reverberation chamber
ISO 11453:1996 Statistical interpretation of data - Tests and confidence intervals relating to proportions
ISO/IEC 11458:1993 Information technology - Microprocessor systems - VICbus - Inter-crate cable bus
ISO/IEC 11518-1:1995 Part 1: Mechanical, electrical and signalling protocol specification (HIPPI-PH)
ISO/IEC 11518-2:2000 Part 2: Framing Protocol (HIPPI-FP)
ISO/IEC 11518-3:1996 Part 3: Encapsulation of ISO/IEC 8802-2 (IEEE Std 802.2) Logical Link Control Protocol Data Units (HIPPI-LE)
ISO/IEC 11518-6:2000 Part 6: Physical Switch Control (HIPPI-SC)
ISO/IEC 11518-9:1999 Part 9: Serial specification (HIPPI-Serial)
ISO/IEC 11518-10:2001 Part 10: 6400 Mbit/s Physical Layer (HIPPI-6400-PH)
ISO 11532:2012 Aircraft ground equipment - Graphical symbols
ISO/IEC 11544:1993 Information technology - Coded representation of picture and audio information - Progressive bi-level image compression
ISO 11546 Acoustics – Determination of sound insulation performances of enclosures
ISO 11546-1:1995 Part 1: Measurements under laboratory conditions (for declaration purposes)
ISO 11546-2:1995 Part 2: Measurements in situ (for acceptance and verification purposes)
ISO/TR 11548 Communication aids for blind persons - Identifiers, names and assignation to coded character sets for 8-dot Braille characters
ISO/TR 11548-1:2001 Part 1: General guidelines for Braille identifiers and shift marks
ISO/TR 11548-2:2001 Part 2: Latin alphabet based character sets
ISO 11551:2003 Optics and optical instruments – Lasers and laser-related equipment – Test method for absorptance of optical laser components
ISO 11553 Safety of machinery – Laser processing machines
ISO 11553-1:2005 Part 1: General safety requirements
ISO 11553-2:2007 Part 2: Safety requirements for hand-held laser processing devices
ISO 11553-3:2013 Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2)
ISO 11554:2017 Optics and photonics – Lasers and laser-related equipment – Test methods for laser beam power, energy and temporal characteristics
ISO/IEC 11557:1992 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-DC format using 60 m and 90 m length tapes
ISO/IEC 11558:1992 Information technology – Data compression for information interchange – Adaptive coding with embedded dictionary – DCLZ Algorithm
ISO/IEC 11559:1993 Information technology – Data interchange on 12,7 mm wide 18-track magnetic tape cartridges – Extended format
ISO/IEC 11560:1992 Information technology - Information interchange on 130 mm optical disk cartridges using the magneto-optical effect, for write once, read multiple functionality
ISO 11568 Financial services – Key management (retail)[Note 4]
ISO 11568-1:2005 Part 1: Principles
ISO 11568-2:2012 Part 2: Symmetric ciphers, their key management and life cycle
ISO 11568-4:2007 Part 4: Asymmetric cryptosystems – Key management and life cycle
ISO/IEC 11569:1993 Information technology – Telecommunications and information exchange between systems – 26-pole interface connector mateability dimensions and contact number assignments
ISO/IEC 11570:1992 Information technology – Telecommunications and information exchange between systems – Open Systems Interconnection – Transport protocol identification mechanism
ISO/IEC 11571:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Networks – Addressing
ISO/IEC 11572:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Circuit mode bearer services – Inter-exchange signalling procedures and protocol
ISO/IEC 11573:1994 Information technology – Telecommunications and information exchange between systems – Synchronization methods and technical requirements for Private Integrated Services Networks
ISO/IEC 11574:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Circuit-mode 64 kbit/s bearer services – Service description, functional capabilities and information flows
ISO/IEC 11575:1995 Information technology – Telecommunications and information exchange between systems – Protocol mappings for the OSI Data Link service
ISO/IEC 11576:1994 Information technology – Procedure for the registration of algorithms for the lossless compression of data
ISO/IEC 11577:1995 Information technology – Open Systems Interconnection – Network layer security protocol
ISO/IEC 11579 Information technology – Telecommunications and information exchange between systems – Private integrated services network
ISO/IEC 11579-1:1994 Part 1: Reference configuration for PISN Exchanges (PINX)
ISO/IEC 11579-2:1999 Part 2: Reference configuration for HS-PISN Exchanges (HS-PINX)
ISO/IEC 11579-3:1999 Part 3: Reference configuration for PINX extension lines
ISO/IEC TR 11580:2007 Information technology – Framework for describing user interface objects, actions and attributes
ISO/IEC 11581 Information technology – User interface icons[Note 4]
ISO/IEC 11581-1:2000 Part 1: Icons – General
ISO/IEC TR 11581-1:2011 Part 1: Introduction to and overview of icon standards
ISO/IEC 11581-2:2000 Part 2: Object icons
ISO/IEC 11581-3:2000 Part 3: Pointer icons
ISO/IEC 11581-5:2004 Part 5: Tool icons
ISO/IEC 11581-6:1999 Part 6: Action icons
ISO/IEC 11581-10:2010 Part 10: Framework and general guidance
ISO/IEC 11581-40:2011 Part 40: Management of icon registration
ISO/IEC TS 11581-41:2014 Part 41: Data structure to be used by the ISO/IEC JTC 1/SC 35 icon database
ISO/IEC 11582:2002 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Generic functional protocol for the support of supplementary services – Inter-exchange signalling procedures and protocol
ISO/TR 11583:2012 Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits
ISO/IEC 11584:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Circuit-mode multi-rate bearer services – Service description, functional capabilities and information flows
ISO/IEC 11586 Information technology - Open Systems Interconnection - Generic upper layers security
ISO/IEC 11586-1:1996 Overview, models and notation
ISO/IEC 11586-2:1996 Security Exchange Service Element (SESE) service definition
ISO/IEC 11586-3:1996 Security Exchange Service Element (SESE) protocol specification
ISO/IEC 11586-4:1996 Protecting transfer syntax specification
ISO/IEC 11586-5:1997 Security Exchange Service Element (SESE) Protocol Implementation Conformance Statement (PICS) proforma
ISO 11612 Protective clothing - Protection against brief contact with heat and flame. The heat can be convective, radiant, molten material, or a combination thereof.
ISO 11615:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated medicinal product information
ISO 11616:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated pharmaceutical product information
ISO 11620:2014 Information and documentation - Library performance indicators
ISO 11631:1998 Measurement of fluid flow – Methods of specifying flowmeter performance
ISO/TR 11633 Health informatics – Information security management for remote maintenance of medical devices and medical information systems
ISO/TR 11633-1:2009 Part 1: Requirements and risk analysis
ISO/TR 11633-2:2009 Part 2: Implementation of an information security management system (ISMS)
ISO/TR 11636:2009 Health Informatics – Dynamic on-demand virtual private network for health information infrastructure
ISO 11648 Statistical aspects of sampling from bulk materials
ISO 11648-1:2003 Part 1: General principles
ISO 11648-2:2001 Part 2: Sampling of particulate materials
ISO 11649:2009 Financial services – Core banking – Structured creditor reference to remittance information
ISO/TR 11651:2015 Estimation of sediment deposition in reservoirs using one dimensional simulation models
ISO 11655:1995 Measurement of liquid flow in open channels – Method of specifying performance of hydrometric equipment
ISO 11657:2014 Hydrometry – Suspended sediment in streams and canals – Determination of concentration by surrogate techniques
ISO 11658:2012 Cardiovascular implants and extracorporeal systems – Blood/tissue contact surface modifications for extracorporeal perfusion systems
ISO 11663:2014 Quality of dialysis fluid for haemodialysis and related therapies
ISO 11664-1:2007 Part 1: CIE standard colorimetric observers
ISO 11664-2:2007 Part 2: CIE standard illuminants
ISO 11664-3:2012 Part 3: CIE tristimulus values
ISO 11664-4:2008 Part 4: CIE 1976 L*a*b* Colour space
ISO/CIE 11664-5:2016 Part 5: CIE 1976 L*u*v* colour space and u', v' uniform chromaticity scale diagram
ISO/CIE 11664-6:2014 Part 6: CIEDE2000 Colour-difference formula
ISO 11665 Measurement of radioactivity in the environment - Air: radon-222
ISO 11665-1:2012 Part 1: Origins of radon and its short-lived decay products and associated measurement methods
ISO 11665-2:2012 Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products
ISO 11665-3:2012 Part 3: Spot measurement method of the potential alpha energy concentration of its short-lived decay products
ISO 11665-4:2012 Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
ISO 11665-5:2012 Part 5: Continuous measurement method of the activity concentration
ISO 11665-6:2012 Part 6: Spot measurement method of the activity concentration
ISO 11665-7:2012 Part 7: Accumulation method for estimating surface exhalation rate
ISO 11665-8:2012 Part 8: Methodologies for initial and additional investigations in buildings
ISO 11665-9:2016 Part 9: Test methods for exhalation rate of building materials
ISO 11665-11:2016 Part 11: Test method for soil gas with sampling at depth
ISO/TS 11669:2012 Translation projects - General guidance
ISO 11670:2003 Lasers and laser-related equipment – Test methods for laser beam parameters – Beam positional stability
ISO/TS 11672:2016 Connectors for fluid power and general use - Designation and nomenclature
ISO 11675:2005 Textile machinery and accessories – Flatbed knitting machines – Vocabulary
ISO 11676:2014 Textile machinery and accessories – Pattern disks and pattern chains for warp knitting machines – Vocabulary and symbols
ISO 11683:1997 Packaging - Tactile warnings of danger - Requirements
ISO 11684:1995 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Safety signs and hazard pictorials - General principles
ISO/TR 11688 Acoustics – Recommended practice for the design of low-noise machinery and equipment
ISO/TR 11688-1:1995 Part 1: Planning
ISO/TR 11688-2:1998 Part 2: Introduction to the physics of low-noise design
ISO 11689:1996 Acoustics – Procedure for the comparison of noise-emission data for machinery and equipment
ISO 11783 Tractors and machinery for agriculture and forestry – Serial control and communications data network
ISO 11798:1999 Information and documentation - Permanence and durability of writing, printing and copying on paper - Requirements and test methods
ISO 11799:2015 Information and documentation - Document storage requirements for archive and library materials
ISO 11800:1998 Information and documentation – Requirements for binding materials and methods used in the manufacture of books
ISO/IEC 11801:2002 Information technology – Generic cabling for customer premises[Note 4]
ISO/IEC TR 11801-9901:2014 Part 9901: Guidance for balanced cabling in support of at least 40 Gbit/s data transmission
ISO/IEC TR 11801-9902:2017 Part 9902: Specifications for End-to-end link configurations
ISO/IEC TR 11801-9903:2015 Part 9903: Matrix modelling of channels and links
ISO/IEC TR 11801-9904:2017 Part 9904: Guidelines for the use of installed cabling to support 2,5GBASE -T and 5GBASE -T applications
ISO/IEC TR 11802 Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Technical reports and guidelines
ISO/IEC TR 11802-5:1997 Part 5: Media Access Control (MAC) Bridging of Ethernet V2.0 in Local Area Networks
ISO 11807 Integrated optics - Vocabulary
ISO 11807-1:2001 Part 1: Basic terms and symbols
ISO 11807-2:2001 Part 2: Terms used in classification
ISO 11810:2015 Lasers and laser-related equipment – Test method and classification for the laser resistance of surgical drapes and/or patient protective covers – Primary ignition, penetration, flame spread and secondary ignition
ISO/TR 11811:2012 Nanotechnologies – Guidance on methods for nano- and microtribology measurements
ISO 11819 Acoustics – Measurement of the influence of road surfaces on traffic noise[Note 4]
ISO 11819-1:1997 Part 1: Statistical Pass-By method
ISO 11819-2:2017 Part 2: The close-proximity method
ISO/TS 11819-3:2017 Part 3: Reference tyres
ISO/PAS 11819-4:2013 Part 4: SPB method using backing board
ISO 11821:1997 Acoustics – Measurement of the in situ sound attenuation of a removable screen
ISO 11822:1996 Information and documentation - Extension of the Arabic alphabet coded character set for bibliographic information interchange
ISO 11838:1997 Motorcycle and motorcycle-rider kinematics – Vocabulary
ISO 11841 Road vehicles and internal combustion engines – Filter vocabulary
ISO 11841-1:2000 Part 1: Definitions of filters and filter components
ISO 11841-2:2000 Part 2: Definitions of characteristics of filters and their components
ISO 11843 Capability of detection
ISO 11843-1:1997 Part 1: Terms and definitions
ISO 11843-2:2000 Part 2: Methodology in the linear calibration case
ISO 11843-3:2003 Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used
ISO 11843-4:2003 Part 4: Methodology for comparing the minimum detectable value with a given value
ISO 11843-5:2008 Part 5: Methodology in the linear and non-linear calibration cases
ISO 11843-6:2013 Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
ISO 11843-7:2012 Part 7: Methodology based on stochastic properties of instrumental noise
ISO 11866 Milk and milk products – Enumeration of presumptive Escherichia coli
ISO 11904 Acoustics – Determination of sound immission from sound sources placed close to the ear
ISO 11904-1:2002 Part 1: Technique using a microphone in a real ear (MIRE technique)
ISO 11904-2:2004 Part 2: Technique using a manikin
ISO 11929:2010 Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation - Fundamentals and application
ISO 11930:2012 Cosmetics – Microbiology – Evaluation of the antimicrobial protection of a cosmetic product
ISO/TS 11931:2012 Nanotechnologies – Nanoscale calcium carbonate in powder form – Characteristics and measurement
ISO/TS 11937:2012 Nanotechnologies – Nanoscale titanium dioxide in powder form – Characteristics and measurement
ISO 11940:1998 Information and documentation - Transliteration of Thai
ISO 11940-2:2007 Information and documentation - Transliteration of Thai characters into Latin characters - Part 2: Simplified transcription of Thai language
ISO/TR 11941:1996 Information and documentation - Transliteration of Korean script into Latin characters [Withdrawn, no replacement]
ISO 11957:1996 Acoustics – Determination of sound insulation performance of cabins – Laboratory and in situ measurements
ISO/IEC 11976:2008 Information technology - Data interchange on 130 mm rewritable and write-once-read-many ultra density optical (UDO) disk cartridges - Capacity: 60 Gbytes per cartridge - Second generation
ISO 11978:2017 Ophthalmic optics – Contact lenses and contact lens care products – Labelling
ISO 11979 Ophthalmic implants - Intraocular lenses
ISO 11979-1:2012 Part 1: Vocabulary
ISO 11979-2:2014 Part 2: Optical properties and test methods
ISO 11979-3:2012 Part 3: Mechanical properties and test methods
ISO 11979-4:2008 Part 4: Labelling and information
ISO 11979-5:2006 Part 5: Biocompatibility
ISO 11979-6:2014 Part 6: Shelf-life and transport stability testing
ISO 11979-7:2014 Part 7: Clinical investigations
ISO 11979-8:2017 Part 8: Fundamental requirements
ISO 11979-9:2006 Part 9: Multifocal intraocular lenses
ISO 11979-10:2006 Part 10: Phakic intraocular lenses
ISO 11980:2012 Ophthalmic optics – Contact lenses and contact lens care products – Guidance for clinical investigations
ISO 11981:2009 Ophthalmic optics – Contact lenses and contact lens care products – Determination of physical compatibility of contact lens care products with contact lenses
ISO 11986:2010 Ophthalmic optics – Contact lenses and contact lens care products – Determination of preservative uptake and release
ISO 11987:2012 Ophthalmic optics – Contact lenses – Determination of shelf-life
ISO/IEC 11989:2010 Information technology - iSCSI Management API
ISO 11990 Lasers and laser-related equipment – Determination of laser resistance of tracheal tubes
ISO 11990-1:2011 Part 1: Tracheal tube shaft
ISO 11990-2:2010 Part 2: Tracheal tube cuffs
ISO/TR 11991:1995 Guidance on airway management during laser surgery of upper airway
^ISO deliverablesArchived 2007-08-12 at the Wayback Machine include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards".
^ abcdefThe exact wording of this title varies between parts. This is the wording of the most recently published part.
^ abcdeThe exact wording of this title varies between parts. This is the wording of the most recently published part.
