Contents

Chi (unit)

Chi (China)
Wooden ruler of the western Han dynasty, unearthed at Jinguan Pass Site in Jinta County
General information
Unit system	traditional Chinese unit
Unit of	length
Conversions
1 chi (china) in ...	... is equal to ...
metric (SI) units	⁠1/3⁠ m  ~333.3 mm
imperial/US units	~1.0936 ft  ~13.123 in

Chek (Hong Kong)
a section of an old Hong Kong ruler, showing the last (10th) cun of a chi. One can see that the chi in that jurisdiction was exactly equal to ⁠14+5/8⁠ of an inch. A metric ruler is shown next to it for comparison
General information
Unit system	traditional Chinese unit
Unit of	length
Conversions
1 chek (hong kong) in ...	... is equal to ...
metric (SI) units	0.371475 m  ~371.5 mm
imperial/US units	1.21875 ft  ⁠14+5/8⁠ in

The chi (Tongyong Pinyin chih) is a traditional Chinese unitoflength. Although it is often translated as the "Chinese foot", its length was originally derived from the distance measured by a human hand, from the tip of the thumb to the tip of the forefinger, and is similar to the ancient span. It first appeared during China's Shang dynasty approximately 3,000 years ago and has since been adopted by other East Asian cultures such as Japan (shaku), Korea (ja/cheok), and Vietnam (thước). Its present value is standardized at around one-third metre (1 ft 1 in), although the exact standards vary among the mainland of the People's Republic of China, its special administrative regionofHong Kong, and Taiwan.

In its ancient and modern forms, the chi is divided into 10 smaller units known as cun (the "Chinese inch"). 10 chi are equal to 1 zhàng.^[1]

In the People's Republic of China, since 1984, the chi has been defined as exactly 1/3 of a metre, i.e., 33+1⁄3 cm (13.1 in). However, in the Hong Kong SAR the corresponding unit, pronounced chekinCantonese, is defined as exactly 0.371475 m (1 ft 2.6250 in) or 1 7/32 ft.^[2] The two units are sometimes referred to in English as "Chinese foot" and "Hong Kong foot".

In Taiwan, chi is the same as the Japanese shaku, i.e., 10⁄33 metre (11.93 in).^{[citation needed]}

The study of ancient rulers and other artifacts whose size in the contemporary chi was known allowed modern researchers to surmise that during the 2nd century BC to 3rd century AD the (Qin dynastytoHan dynasty to the Three Kingdoms period), the value of the chi varied between 23.1 and 24.3 cm (9.1 and 9.6 in).^[3] Even earlier, during the Warring States era, the value of chi was essentially the same.^[4]

It is thought that the ancient Chinese astronomers also used chi as an angular unit; modern analysis of historical records indicates that it may have been equal to one degree.^[5]

In the 19th century, the value of the chi, depending on the part of the country and the application, varied between 31 and 36 cm (12 and 14 in). According to an 1864 British report, in most of China the chi used by engineers in public works was equal to 12.71 inches (32.3 cm), the surveyors' chi was 12.058 inches (30.63 cm), while the value generally used for measuring distances was 12.17 inches (30.9 cm). In Guangzhou, however, the chi used for local trade varied from 14.625 to 14.81 inches (37.15 to 37.62 cm) – i.e., very close to the modern chek. The value fixed by a Sino-British treaty for the purposes of customs duties in Hong Kong was 14.1 inches (36 cm).^[6]

Due to its long history and its widespread usage, chi (along with cun) has also seen metaphorical usages in the Chinese language. For example, chi cun (Chinese: 尺寸), a word made up of the units chi and cun, refers to the dimensions of an object, while the idiom "dé cùn jìn chǐ" (simplified Chinese: 得寸进尺; traditional Chinese: 得寸進尺; lit. 'gaining a cun and asking for a chi') means "extremely greedy".

In informal use in China, chi is also sometimes used to refer to the United States customary footorBritish imperial foot.

Look up chi, chek, or 尺 in Wiktionary, the free dictionary.