Comminution is the reduction of solid materials from one average particle size to a smaller average particle size, by crushing, grinding, cutting, vibrating, or other processes.[1][2]Ingeology, it occurs naturally during faulting in the upper part of the Earth's crust.[3]Inindustry, it is an important unit operationinmineral processing, ceramics, electronics, and other fields, accomplished with many types of mill. In dentistry, it is the result of mastication of food. In general medicine, it is one of the most traumatic forms of bone fracture.
Within industrial uses, the purpose of comminution is to reduce the size and to increase the surface area of solids. It is also used to free useful materials from matrix materials in which they are embedded, and to concentrate minerals.[2]
The comminution of solid materials consumes energy, which is being used to break up the solid into smaller pieces. The comminution energy can be estimated by:
There are three forces which are typically used to affect the comminution of particles: impact, shear, and compression.
There are several methods of comminution. Comminution of solid materials requires different types of crushers and mills depending on the feed properties such as hardness at various size ranges and application requirements such as throughput and maintenance. The most common machines for the comminution of coarse feed material (primary crushers) are the jaw crusher (1m >P80 > 100 mm), cone crusher (P80 > 20 mm) and hammer crusher. Primary crusher products in intermediate feed particle size ranges (100mm > P80 > 20mm) can be ground in autogenous (AG) or semi-autogenous (SAG) mills depending on feed properties and application requirements. For comminution of finer particle size ranges (20mm >P80 > 30 μm) machines like the ball mill, vertical roller mill, hammer mill, roller press or high compression roller mill, vibration mill, jet mill and others are used. For yet finer grind sizes (sometimes referred to as "ultrafine grinding"), specialist mills such as the IsaMill are used.
Trituration, for instance, is comminution (or substance breakdown) by rubbing. Furthermore, methods of trituration include levigation, which is the trituration of a powder with a non-solvent liquid, and pulverization by intervention, which is trituration with a solvent that can be easily removed after the substance has been broken down.
|
| |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Mineral processing (by physical means) |
| ||||||||
| Pyrometallurgy (by heat) |
| ||||||||
| Hydrometallurgy (by aqueous solution) |
| ||||||||
| Electrometallurgy (by electricity) |
| ||||||||
| Co-products |
| ||||||||
