Contents

Continuum mechanics

Branch of physics which studies the behavior of materials modeled as continuous media

This article includes a list of general references, but it lacks sufficient corresponding inline citations. Please help to improve this article by introducing more precise citations. (October 2019) (Learn how and when to remove this message)

Part of a series on
Continuum mechanics
${\displaystyle J=-D{\frac {d\varphi }{dx}}}$ Fick's laws of diffusion
Laws Conservations Mass Momentum Energy Inequalities Clausius–Duhem (entropy)
Solid mechanics Deformation Elasticity linear Plasticity Hooke's law Stress Strain Finite strain Infinitesimal strain Compatibility Bending Contact mechanics frictional Material failure theory Fracture mechanics
Fluid mechanics Fluids Statics · Dynamics Archimedes' principle · Bernoulli's principle Navier–Stokes equations Poiseuille equation · Pascal's law Viscosity (Newtonian · non-Newtonian) Buoyancy · Mixing · Pressure Liquids Adhesion Capillary action Chromatography Cohesion (chemistry) Surface tension Gases Atmosphere Boyle's law Charles's law Combined gas law Fick's law Gay-Lussac's law Graham's law Plasma
Rheology Viscoelasticity Rheometry Rheometer Smart fluids Electrorheological Magnetorheological Ferrofluids
Scientists Bernoulli Boyle Cauchy Charles Euler Fick Gay-Lussac Graham Hooke Newton Navier Noll Pascal Stokes Truesdell
v t e

Continuum mechanics is a branch of mechanics that deals with the deformation of and transmission of forces through materials modeled as a continuous medium (also called a continuum) rather than as discrete particles. The French mathematician Augustin-Louis Cauchy was the first to formulate such models in the 19th century.

Continuum mechanics deals with deformable bodies, as opposed to rigid bodies. A continuum model assumes that the substance of the object completely fills the space it occupies. While ignoring the fact that matter is made of atoms, this provides a sufficiently accurate description of matter on length scales much greater than that of inter-atomic distances. The concept of a continuous medium allows for intuitive analysis of bulk matter by using differential equations that describe the behavior of such matter according to physical laws, such as mass conservation, momentum conservation, and energy conservation. Information about the specific material is expressed in constitutive relationships.

Continuum mechanics treats the physical properties of solids and fluids independently of any particular coordinate system in which they are observed. These properties are represented by tensors, which are mathematical objects with the salient property of being independent of coordinate systems. This permits definition of physical properties at any point in the continuum, according to mathematically convenient continuous functions. The theories of elasticity, plasticity and fluid mechanics are based on the concepts of continuum mechanics.

The concept of a continuum underlies the mathematical framework for studying large-scale forces and deformations in materials. Although materials are composed of discrete atoms and molecules, separated by empty space or microscopic cracks and crystallographic defects, physical phenomena can often be modeled by considering a substance distributed throughout some region of space. A continuum is a body that can be continually sub-divided into infinitesimal elements with local material properties defined at any particular point. Properties of the bulk material can therefore be described by continuous functions, and their evolution can be studied using the mathematics of calculus.

Apart from the assumption of continuity, two other independent assumptions are often employed in the study of continuum mechanics. These are homogeneity (assumption of identical properties at all locations) and isotropy (assumption of directionally invariant vector properties).^[1] If these auxiliary assumptions are not globally applicable, the material may be segregated into sections where they are applicable in order to simplify the analysis. For more complex cases, one or both of these assumptions can be dropped. In these cases, computational methods are often used to solve the differential equations describing the evolution of material properties.

An additional area of continuum mechanics comprises elastomeric foams, which exhibit a curious hyperbolic stress-strain relationship. The elastomer is a true continuum, but a homogeneous distribution of voids gives it unusual properties.^[2]

Continuum mechanics models begin by assigning a region in three-dimensional Euclidean space to the material body ${\displaystyle {\mathcal {B}}}$ being modeled. The points within this region are called particles or material points. Different configurations or states of the body correspond to different regions in Euclidean space. The region corresponding to the body's configuration at time ${\displaystyle t}$ is labeled ${\displaystyle \kappa _{t}({\mathcal {B}})}$.

A particular particle within the body in a particular configuration is characterized by a position vector

${\displaystyle \mathbf {x} =\sum _{i=1}^{3}x_{i}\mathbf {e} _{i},}$

where ${\displaystyle \mathbf {e} _{i}}$ are the coordinate vectors in some frame of reference chosen for the problem (See figure 1). This vector can be expressed as a function of the particle position ${\displaystyle \mathbf {X} }$ in some reference configuration, for example the configuration at the initial time, so that

${\displaystyle \mathbf {x} =\kappa _{t}(\mathbf {X} ).}$

This function needs to have various properties so that the model makes physical sense. ${\displaystyle \kappa _{t}(\cdot )}$ needs to be:

• continuous in time, so that the body changes in a way which is realistic,
• globally invertible at all times, so that the body cannot intersect itself,
• orientation-preserving, as transformations which produce mirror reflections are not possible in nature.

For the mathematical formulation of the model, ${\displaystyle \kappa _{t}(\cdot )}$ is also assumed to be twice continuously differentiable, so that differential equations describing the motion may be formulated.

A solid is a deformable body that possesses shear strength, sc. a solid can support shear forces (forces parallel to the material surface on which they act). Fluids, on the other hand, do not sustain shear forces.

Following the classical dynamics of Newton and Euler, the motion of a material body is produced by the action of externally applied forces which are assumed to be of two kinds: surface forces ${\displaystyle \mathbf {F} _{C}}$ and body forces ${\displaystyle \mathbf {F} _{B}}$.^[3] Thus, the total force ${\displaystyle {\mathcal {F}}}$ applied to a body or to a portion of the body can be expressed as:

${\displaystyle {\mathcal {F}}=\mathbf {F} _{C}+\mathbf {F} _{B}}$

Surface forcesorcontact forces, expressed as force per unit area, can act either on the bounding surface of the body, as a result of mechanical contact with other bodies, or on imaginary internal surfaces that bound portions of the body, as a result of the mechanical interaction between the parts of the body to either side of the surface (Euler-Cauchy's stress principle). When a body is acted upon by external contact forces, internal contact forces are then transmitted from point to point inside the body to balance their action, according to Newton's third law of motion of conservation of linear momentum and angular momentum (for continuous bodies these laws are called the Euler's equations of motion). The internal contact forces are related to the body's deformation through constitutive equations. The internal contact forces may be mathematically described by how they relate to the motion of the body, independent of the body's material makeup.^{[citation needed]}

The distribution of internal contact forces throughout the volume of the body is assumed to be continuous. Therefore, there exists a contact force densityorCauchy traction field^[4] ${\displaystyle \mathbf {T} (\mathbf {n} ,\mathbf {x} ,t)}$ that represents this distribution in a particular configuration of the body at a given time ${\displaystyle t\,\!}$. It is not a vector field because it depends not only on the position ${\displaystyle \mathbf {x} }$ of a particular material point, but also on the local orientation of the surface element as defined by its normal vector ${\displaystyle \mathbf {n} }$.^{[5][page needed]}

Any differential area ${\displaystyle dS\,\!}$ with normal vector ${\displaystyle \mathbf {n} }$ of a given internal surface area ${\displaystyle S\,\!}$, bounding a portion of the body, experiences a contact force ${\displaystyle d\mathbf {F} _{C}\,\!}$ arising from the contact between both portions of the body on each side of ${\displaystyle S\,\!}$, and it is given by

${\displaystyle d\mathbf {F} _{C}=\mathbf {T} ^{(\mathbf {n} )}\,dS}$

where ${\displaystyle \mathbf {T} ^{(\mathbf {n} )}}$ is the surface traction,^[6] also called stress vector,^[7] traction,^{[8][page needed]}ortraction vector.^[9] The stress vector is a frame-indifferent vector (see Euler-Cauchy's stress principle).

The total contact force on the particular internal surface ${\displaystyle S\,\!}$ is then expressed as the sum (surface integral) of the contact forces on all differential surfaces ${\displaystyle dS\,\!}$:

${\displaystyle \mathbf {F} _{C}=\int _{S}\mathbf {T} ^{(\mathbf {n} )}\,dS}$

In continuum mechanics a body is considered stress-free if the only forces present are those inter-atomic forces (ionic, metallic, and van der Waals forces) required to hold the body together and to keep its shape in the absence of all external influences, including gravitational attraction.^[9][10] Stresses generated during manufacture of the body to a specific configuration are also excluded when considering stresses in a body. Therefore, the stresses considered in continuum mechanics are only those produced by deformation of the body, sc. only relative changes in stress are considered, not the absolute values of stress.

Body forces are forces originating from sources outside of the body^[11] that act on the volume (or mass) of the body. Saying that body forces are due to outside sources implies that the interaction between different parts of the body (internal forces) are manifested through the contact forces alone.^[6] These forces arise from the presence of the body in force fields, e.g. gravitational field (gravitational forces) or electromagnetic field (electromagnetic forces), or from inertial forces when bodies are in motion. As the mass of a continuous body is assumed to be continuously distributed, any force originating from the mass is also continuously distributed. Thus, body forces are specified by vector fields which are assumed to be continuous over the entire volume of the body,^[12] i.e. acting on every point in it. Body forces are represented by a body force density ${\displaystyle \mathbf {b} (\mathbf {x} ,t)}$ (per unit of mass), which is a frame-indifferent vector field.

In the case of gravitational forces, the intensity of the force depends on, or is proportional to, the mass density ${\displaystyle \mathbf {\rho } (\mathbf {x} ,t)\,\!}$ of the material, and it is specified in terms of force per unit mass (${\displaystyle b_{i}\,\!}$) or per unit volume (${\displaystyle p_{i}\,\!}$). These two specifications are related through the material density by the equation ${\displaystyle \rho b_{i}=p_{i}\,\!}$. Similarly, the intensity of electromagnetic forces depends upon the strength (electric charge) of the electromagnetic field.

The total body force applied to a continuous body is expressed as

${\displaystyle \mathbf {F} _{B}=\int _{V}\mathbf {b} \,dm=\int _{V}\rho \mathbf {b} \,dV}$

Body forces and contact forces acting on the body lead to corresponding moments of force (torques) relative to a given point. Thus, the total applied torque ${\displaystyle {\mathcal {M}}}$ about the origin is given by

${\displaystyle {\mathcal {M}}=\mathbf {M} _{C}+\mathbf {M} _{B}}$

In certain situations, not commonly considered in the analysis of the mechanical behavior of materials, it becomes necessary to include two other types of forces: these are couple stresses^{[note 1][note 2]} (surface couples,^[11] contact torques)^[12] and body moments. Couple stresses are moments per unit area applied on a surface. Body moments, or body couples, are moments per unit volume or per unit mass applied to the volume of the body. Both are important in the analysis of stress for a polarized dielectric solid under the action of an electric field, materials where the molecular structure is taken into consideration (e.g. bones), solids under the action of an external magnetic field, and the dislocation theory of metals.^{[7][8][page needed][11]}

Materials that exhibit body couples and couple stresses in addition to moments produced exclusively by forces are called polar materials.^{[8][page needed][12]} Non-polar materials are then those materials with only moments of forces. In the classical branches of continuum mechanics the development of the theory of stresses is based on non-polar materials.

Thus, the sum of all applied forces and torques (with respect to the origin of the coordinate system) in the body can be given by

${\displaystyle {\mathcal {F}}=\int _{V}\mathbf {a} \,dm=\int _{S}\mathbf {T} \,dS+\int _{V}\rho \mathbf {b} \,dV}$

${\displaystyle {\mathcal {M}}=\int _{S}\mathbf {r} \times \mathbf {T} \,dS+\int _{V}\mathbf {r} \times \rho \mathbf {b} \,dV}$

A change in the configuration of a continuum body results in a displacement. The displacement of a body has two components: a rigid-body displacement and a deformation. A rigid-body displacement consists of a simultaneous translation and rotation of the body without changing its shape or size. Deformation implies the change in shape and/or size of the body from an initial or undeformed configuration ${\displaystyle \kappa _{0}({\mathcal {B}})}$ to a current or deformed configuration ${\displaystyle \kappa _{t}({\mathcal {B}})}$ (Figure 2).

The motion of a continuum body is a continuous time sequence of displacements. Thus, the material body will occupy different configurations at different times so that a particle occupies a series of points in space which describe a path line.

There is continuity during motion or deformation of a continuum body in the sense that:

• The material points forming a closed curve at any instant will always form a closed curve at any subsequent time.
• The material points forming a closed surface at any instant will always form a closed surface at any subsequent time and the matter within the closed surface will always remain within.

It is convenient to identify a reference configuration or initial condition which all subsequent configurations are referenced from. The reference configuration need not be one that the body will ever occupy. Often, the configuration at ${\displaystyle t=0}$ is considered the reference configuration, ${\displaystyle \kappa _{0}({\mathcal {B}})}$. The components ${\displaystyle X_{i}}$ of the position vector ${\displaystyle \mathbf {X} }$ of a particle, taken with respect to the reference configuration, are called the material or reference coordinates.

When analyzing the motion or deformation of solids, or the flow of fluids, it is necessary to describe the sequence or evolution of configurations throughout time. One description for motion is made in terms of the material or referential coordinates, called material description or Lagrangian description.

In the Lagrangian description the position and physical properties of the particles are described in terms of the material or referential coordinates and time. In this case the reference configuration is the configuration at ${\displaystyle t=0}$. An observer standing in the frame of reference observes the changes in the position and physical properties as the material body moves in space as time progresses. The results obtained are independent of the choice of initial time and reference configuration, ${\displaystyle \kappa _{0}({\mathcal {B}})}$. This description is normally used in solid mechanics.

In the Lagrangian description, the motion of a continuum body is expressed by the mapping function ${\displaystyle \chi (\cdot )}$ (Figure 2),

${\displaystyle \mathbf {x} =\chi (\mathbf {X} ,t)}$

which is a mapping of the initial configuration ${\displaystyle \kappa _{0}({\mathcal {B}})}$ onto the current configuration ${\displaystyle \kappa _{t}({\mathcal {B}})}$, giving a geometrical correspondence between them, i.e. giving the position vector ${\displaystyle \mathbf {x} =x_{i}\mathbf {e} _{i}}$ that a particle ${\displaystyle X}$, with a position vector ${\displaystyle \mathbf {X} }$ in the undeformed or reference configuration ${\displaystyle \kappa _{0}({\mathcal {B}})}$, will occupy in the current or deformed configuration ${\displaystyle \kappa _{t}({\mathcal {B}})}$ at time ${\displaystyle t}$. The components ${\displaystyle x_{i}}$ are called the spatial coordinates.

Physical and kinematic properties ${\displaystyle P_{ij\ldots }}$, i.e. thermodynamic properties and flow velocity, which describe or characterize features of the material body, are expressed as continuous functions of position and time, i.e. ${\displaystyle P_{ij\ldots }=P_{ij\ldots }(\mathbf {X} ,t)}$.

The material derivative of any property ${\displaystyle P_{ij\ldots }}$ of a continuum, which may be a scalar, vector, or tensor, is the time rate of change of that property for a specific group of particles of the moving continuum body. The material derivative is also known as the substantial derivative, or comoving derivative, or convective derivative. It can be thought as the rate at which the property changes when measured by an observer traveling with that group of particles.

In the Lagrangian description, the material derivative of ${\displaystyle P_{ij\ldots }}$ is simply the partial derivative with respect to time, and the position vector ${\displaystyle \mathbf {X} }$ is held constant as it does not change with time. Thus, we have

${\displaystyle {\frac {d}{dt}}[P_{ij\ldots }(\mathbf {X} ,t)]={\frac {\partial }{\partial t}}[P_{ij\ldots }(\mathbf {X} ,t)]}$

The instantaneous position ${\displaystyle \mathbf {x} }$ is a property of a particle, and its material derivative is the instantaneous flow velocity ${\displaystyle \mathbf {v} }$ of the particle. Therefore, the flow velocity field of the continuum is given by

${\displaystyle \mathbf {v} ={\dot {\mathbf {x} }}={\frac {d\mathbf {x} }{dt}}={\frac {\partial \chi (\mathbf {X} ,t)}{\partial t}}}$

Similarly, the acceleration field is given by

${\displaystyle \mathbf {a} ={\dot {\mathbf {v} }}={\ddot {\mathbf {x} }}={\frac {d^{2}\mathbf {x} }{dt^{2}}}={\frac {\partial ^{2}\chi (\mathbf {X} ,t)}{\partial t^{2}}}}$

Continuity in the Lagrangian description is expressed by the spatial and temporal continuity of the mapping from the reference configuration to the current configuration of the material points. All physical quantities characterizing the continuum are described this way. In this sense, the function ${\displaystyle \chi (\cdot )}$ and ${\displaystyle P_{ij\ldots }(\cdot )}$ are single-valued and continuous, with continuous derivatives with respect to space and time to whatever order is required, usually to the second or third.

Continuity allows for the inverse of ${\displaystyle \chi (\cdot )}$ to trace backwards where the particle currently located at ${\displaystyle \mathbf {x} }$ was located in the initial or referenced configuration ${\displaystyle \kappa _{0}({\mathcal {B}})}$. In this case the description of motion is made in terms of the spatial coordinates, in which case is called the spatial description or Eulerian description, i.e. the current configuration is taken as the reference configuration.

The Eulerian description, introduced by d'Alembert, focuses on the current configuration ${\displaystyle \kappa _{t}({\mathcal {B}})}$, giving attention to what is occurring at a fixed point in space as time progresses, instead of giving attention to individual particles as they move through space and time. This approach is conveniently applied in the study of fluid flow where the kinematic property of greatest interest is the rate at which change is taking place rather than the shape of the body of fluid at a reference time.^[14]

Mathematically, the motion of a continuum using the Eulerian description is expressed by the mapping function

${\displaystyle \mathbf {X} =\chi ^{-1}(\mathbf {x} ,t)}$

which provides a tracing of the particle which now occupies the position ${\displaystyle \mathbf {x} }$ in the current configuration ${\displaystyle \kappa _{t}({\mathcal {B}})}$ to its original position ${\displaystyle \mathbf {X} }$ in the initial configuration ${\displaystyle \kappa _{0}({\mathcal {B}})}$.

A necessary and sufficient condition for this inverse function to exist is that the determinant of the Jacobian matrix, often referred to simply as the Jacobian, should be different from zero. Thus,

${\displaystyle J=\left|{\frac {\partial \chi _{i}}{\partial X_{J}}}\right|=\left|{\frac {\partial x_{i}}{\partial X_{J}}}\right|\neq 0}$

In the Eulerian description, the physical properties ${\displaystyle P_{ij\ldots }}$ are expressed as

${\displaystyle P_{ij\ldots }=P_{ij\ldots }(\mathbf {X} ,t)=P_{ij\ldots }[\chi ^{-1}(\mathbf {x} ,t),t]=p_{ij\ldots }(\mathbf {x} ,t)}$

where the functional form of ${\displaystyle P_{ij\ldots }}$ in the Lagrangian description is not the same as the form of ${\displaystyle p_{ij\ldots }}$ in the Eulerian description.

The material derivative of ${\displaystyle p_{ij\ldots }(\mathbf {x} ,t)}$, using the chain rule, is then

${\displaystyle {\frac {d}{dt}}[p_{ij\ldots }(\mathbf {x} ,t)]={\frac {\partial }{\partial t}}[p_{ij\ldots }(\mathbf {x} ,t)]+{\frac {\partial }{\partial x_{k}}}[p_{ij\ldots }(\mathbf {x} ,t)]{\frac {dx_{k}}{dt}}}$

The first term on the right-hand side of this equation gives the local rate of change of the property ${\displaystyle p_{ij\ldots }(\mathbf {x} ,t)}$ occurring at position ${\displaystyle \mathbf {x} }$. The second term of the right-hand side is the convective rate of change and expresses the contribution of the particle changing position in space (motion).

Continuity in the Eulerian description is expressed by the spatial and temporal continuity and continuous differentiability of the flow velocity field. All physical quantities are defined this way at each instant of time, in the current configuration, as a function of the vector position ${\displaystyle \mathbf {x} }$.

The vector joining the positions of a particle ${\displaystyle P}$ in the undeformed configuration and deformed configuration is called the displacement vector ${\displaystyle \mathbf {u} (\mathbf {X} ,t)=u_{i}\mathbf {e} _{i}}$, in the Lagrangian description, or ${\displaystyle \mathbf {U} (\mathbf {x} ,t)=U_{J}\mathbf {E} _{J}}$, in the Eulerian description.

Adisplacement field is a vector field of all displacement vectors for all particles in the body, which relates the deformed configuration with the undeformed configuration. It is convenient to do the analysis of deformation or motion of a continuum body in terms of the displacement field, In general, the displacement field is expressed in terms of the material coordinates as

${\displaystyle \mathbf {u} (\mathbf {X} ,t)=\mathbf {b} +\mathbf {x} (\mathbf {X} ,t)-\mathbf {X} \qquad {\text{or}}\qquad u_{i}=\alpha _{iJ}b_{J}+x_{i}-\alpha _{iJ}X_{J}}$

or in terms of the spatial coordinates as

${\displaystyle \mathbf {U} (\mathbf {x} ,t)=\mathbf {b} +\mathbf {x} -\mathbf {X} (\mathbf {x} ,t)\qquad {\text{or}}\qquad U_{J}=b_{J}+\alpha _{Ji}x_{i}-X_{J}\,}$

where ${\displaystyle \alpha _{Ji}}$ are the direction cosines between the material and spatial coordinate systems with unit vectors ${\displaystyle \mathbf {E} _{J}}$ and ${\displaystyle \mathbf {e} _{i}}$, respectively. Thus

${\displaystyle \mathbf {E} _{J}\cdot \mathbf {e} _{i}=\alpha _{Ji}=\alpha _{iJ}}$

and the relationship between ${\displaystyle u_{i}}$ and ${\displaystyle U_{J}}$ is then given by

${\displaystyle u_{i}=\alpha _{iJ}U_{J}\qquad {\text{or}}\qquad U_{J}=\alpha _{Ji}u_{i}}$

Knowing that

${\displaystyle \mathbf {e} _{i}=\alpha _{iJ}\mathbf {E} _{J}}$

then

${\displaystyle \mathbf {u} (\mathbf {X} ,t)=u_{i}\mathbf {e} _{i}=u_{i}(\alpha _{iJ}\mathbf {E} _{J})=U_{J}\mathbf {E} _{J}=\mathbf {U} (\mathbf {x} ,t)}$

It is common to superimpose the coordinate systems for the undeformed and deformed configurations, which results in ${\displaystyle \mathbf {b} =0}$, and the direction cosines become Kronecker deltas, i.e.

${\displaystyle \mathbf {E} _{J}\cdot \mathbf {e} _{i}=\delta _{Ji}=\delta _{iJ}}$

Thus, we have

${\displaystyle \mathbf {u} (\mathbf {X} ,t)=\mathbf {x} (\mathbf {X} ,t)-\mathbf {X} \qquad {\text{or}}\qquad u_{i}=x_{i}-\delta _{iJ}X_{J}}$

or in terms of the spatial coordinates as

${\displaystyle \mathbf {U} (\mathbf {x} ,t)=\mathbf {x} -\mathbf {X} (\mathbf {x} ,t)\qquad {\text{or}}\qquad U_{J}=\delta _{Ji}x_{i}-X_{J}}$

Continuum mechanics deals with the behavior of materials that can be approximated as continuous for certain length and time scales. The equations that govern the mechanics of such materials include the balance laws for mass, momentum, and energy. Kinematic relations and constitutive equations are needed to complete the system of governing equations. Physical restrictions on the form of the constitutive relations can be applied by requiring that the second law of thermodynamics be satisfied under all conditions. In the continuum mechanics of solids, the second law of thermodynamics is satisfied if the Clausius–Duhem form of the entropy inequality is satisfied.

The balance laws express the idea that the rate of change of a quantity (mass, momentum, energy) in a volume must arise from three causes:

1. the physical quantity itself flows through the surface that bounds the volume,
2. there is a source of the physical quantity on the surface of the volume, or/and,
3. there is a source of the physical quantity inside the volume.

Let ${\displaystyle \Omega }$ be the body (an open subset of Euclidean space) and let ${\displaystyle \partial \Omega }$ be its surface (the boundary of ${\displaystyle \Omega }$).

Let the motion of material points in the body be described by the map

${\displaystyle \mathbf {x} ={\boldsymbol {\chi }}(\mathbf {X} )=\mathbf {x} (\mathbf {X} )}$

where ${\displaystyle \mathbf {X} }$ is the position of a point in the initial configuration and ${\displaystyle \mathbf {x} }$ is the location of the same point in the deformed configuration.

The deformation gradient is given by

${\displaystyle {\boldsymbol {F}}={\frac {\partial \mathbf {x} }{\partial \mathbf {X} }}=\nabla \mathbf {x} ~.}$

Let ${\displaystyle f(\mathbf {x} ,t)}$ be a physical quantity that is flowing through the body. Let ${\displaystyle g(\mathbf {x} ,t)}$ be sources on the surface of the body and let ${\displaystyle h(\mathbf {x} ,t)}$ be sources inside the body. Let ${\displaystyle \mathbf {n} (\mathbf {x} ,t)}$ be the outward unit normal to the surface ${\displaystyle \partial \Omega }$. Let ${\displaystyle \mathbf {v} (\mathbf {x} ,t)}$ be the flow velocity of the physical particles that carry the physical quantity that is flowing. Also, let the speed at which the bounding surface ${\displaystyle \partial \Omega }$ is moving be ${\displaystyle u_{n}}$ (in the direction ${\displaystyle \mathbf {n} }$).

Then, balance laws can be expressed in the general form

${\displaystyle {\cfrac {d}{dt}}\left[\int _{\Omega }f(\mathbf {x} ,t)~{\text{dV}}\right]=\int _{\partial \Omega }f(\mathbf {x} ,t)[u_{n}(\mathbf {x} ,t)-\mathbf {v} (\mathbf {x} ,t)\cdot \mathbf {n} (\mathbf {x} ,t)]~{\text{dA}}+\int _{\partial \Omega }g(\mathbf {x} ,t)~{\text{dA}}+\int _{\Omega }h(\mathbf {x} ,t)~{\text{dV}}~.}$

The functions ${\displaystyle f(\mathbf {x} ,t)}$, ${\displaystyle g(\mathbf {x} ,t)}$, and ${\displaystyle h(\mathbf {x} ,t)}$ can be scalar valued, vector valued, or tensor valued - depending on the physical quantity that the balance equation deals with. If there are internal boundaries in the body, jump discontinuities also need to be specified in the balance laws.

If we take the Eulerian point of view, it can be shown that the balance laws of mass, momentum, and energy for a solid can be written as (assuming the source term is zero for the mass and angular momentum equations)

${\displaystyle {\begin{aligned}{\dot {\rho }}+\rho ({\boldsymbol {\nabla }}\cdot \mathbf {v} )&=0&&\qquad {\text{Balance of Mass}}\\\rho ~{\dot {\mathbf {v} }}-{\boldsymbol {\nabla }}\cdot {\boldsymbol {\sigma }}-\rho ~\mathbf {b} &=0&&\qquad {\text{Balance of Linear Momentum (Cauchy's first law of motion)}}\\{\boldsymbol {\sigma }}&={\boldsymbol {\sigma }}^{T}&&\qquad {\text{Balance of Angular Momentum (Cauchy's second law of motion)}}\\\rho ~{\dot {e}}-{\boldsymbol {\sigma }}:({\boldsymbol {\nabla }}\mathbf {v} )+{\boldsymbol {\nabla }}\cdot \mathbf {q} -\rho ~s&=0&&\qquad {\text{Balance of Energy.}}\end{aligned}}}$

In the above equations ${\displaystyle \rho (\mathbf {x} ,t)}$ is the mass density (current), ${\displaystyle {\dot {\rho }}}$ is the material time derivative of ${\displaystyle \rho }$, ${\displaystyle \mathbf {v} (\mathbf {x} ,t)}$ is the particle velocity, ${\displaystyle {\dot {\mathbf {v} }}}$ is the material time derivative of ${\displaystyle \mathbf {v} }$, ${\displaystyle {\boldsymbol {\sigma }}(\mathbf {x} ,t)}$ is the Cauchy stress tensor, ${\displaystyle \mathbf {b} (\mathbf {x} ,t)}$ is the body force density, ${\displaystyle e(\mathbf {x} ,t)}$ is the internal energy per unit mass, ${\displaystyle {\dot {e}}}$ is the material time derivative of ${\displaystyle e}$, ${\displaystyle \mathbf {q} (\mathbf {x} ,t)}$ is the heat flux vector, and ${\displaystyle s(\mathbf {x} ,t)}$ is an energy source per unit mass. The operators used are defined below.

With respect to the reference configuration (the Lagrangian point of view), the balance laws can be written as

${\displaystyle {\begin{aligned}\rho ~\det({\boldsymbol {F}})-\rho _{0}&=0&&\qquad {\text{Balance of Mass}}\\\rho _{0}~{\ddot {\mathbf {x} }}-{\boldsymbol {\nabla }}_{\circ }\cdot {\boldsymbol {P}}^{T}-\rho _{0}~\mathbf {b} &=0&&\qquad {\text{Balance of Linear Momentum}}\\{\boldsymbol {F}}\cdot {\boldsymbol {P}}^{T}&={\boldsymbol {P}}\cdot {\boldsymbol {F}}^{T}&&\qquad {\text{Balance of Angular Momentum}}\\\rho _{0}~{\dot {e}}-{\boldsymbol {P}}^{T}:{\dot {\boldsymbol {F}}}+{\boldsymbol {\nabla }}_{\circ }\cdot \mathbf {q} -\rho _{0}~s&=0&&\qquad {\text{Balance of Energy.}}\end{aligned}}}$

In the above, ${\displaystyle {\boldsymbol {P}}}$ is the first Piola-Kirchhoff stress tensor, and ${\displaystyle \rho _{0}}$ is the mass density in the reference configuration. The first Piola-Kirchhoff stress tensor is related to the Cauchy stress tensor by

${\displaystyle {\boldsymbol {P}}=J~{\boldsymbol {\sigma }}\cdot {\boldsymbol {F}}^{-T}~{\text{where}}~J=\det({\boldsymbol {F}})}$

We can alternatively define the nominal stress tensor ${\displaystyle {\boldsymbol {N}}}$ which is the transpose of the first Piola-Kirchhoff stress tensor such that

${\displaystyle {\boldsymbol {N}}={\boldsymbol {P}}^{T}=J~{\boldsymbol {F}}^{-1}\cdot {\boldsymbol {\sigma }}~.}$

Then the balance laws become

${\displaystyle {\begin{aligned}\rho ~\det({\boldsymbol {F}})-\rho _{0}&=0&&\qquad {\text{Balance of Mass}}\\\rho _{0}~{\ddot {\mathbf {x} }}-{\boldsymbol {\nabla }}_{\circ }\cdot {\boldsymbol {N}}-\rho _{0}~\mathbf {b} &=0&&\qquad {\text{Balance of Linear Momentum}}\\{\boldsymbol {F}}\cdot {\boldsymbol {N}}&={\boldsymbol {N}}^{T}\cdot {\boldsymbol {F}}^{T}&&\qquad {\text{Balance of Angular Momentum}}\\\rho _{0}~{\dot {e}}-{\boldsymbol {N}}:{\dot {\boldsymbol {F}}}+{\boldsymbol {\nabla }}_{\circ }\cdot \mathbf {q} -\rho _{0}~s&=0&&\qquad {\text{Balance of Energy.}}\end{aligned}}}$

The operators in the above equations are defined as

${\displaystyle {\boldsymbol {\nabla }}\mathbf {v} =\sum _{i,j=1}^{3}{\frac {\partial v_{i}}{\partial x_{j}}}\mathbf {e} _{i}\otimes \mathbf {e} _{j}=v_{i,j}\mathbf {e} _{i}\otimes \mathbf {e} _{j}~;~~{\boldsymbol {\nabla }}\cdot \mathbf {v} =\sum _{i=1}^{3}{\frac {\partial v_{i}}{\partial x_{i}}}=v_{i,i}~;~~{\boldsymbol {\nabla }}\cdot {\boldsymbol {S}}=\sum _{i,j=1}^{3}{\frac {\partial S_{ij}}{\partial x_{j}}}~\mathbf {e} _{i}=\sigma _{ij,j}~\mathbf {e} _{i}~.}$

where ${\displaystyle \mathbf {v} }$ is a vector field, ${\displaystyle {\boldsymbol {S}}}$ is a second-order tensor field, and ${\displaystyle \mathbf {e} _{i}}$ are the components of an orthonormal basis in the current configuration. Also,

${\displaystyle {\boldsymbol {\nabla }}_{\circ }\mathbf {v} =\sum _{i,j=1}^{3}{\frac {\partial v_{i}}{\partial X_{j}}}\mathbf {E} _{i}\otimes \mathbf {E} _{j}=v_{i,j}\mathbf {E} _{i}\otimes \mathbf {E} _{j}~;~~{\boldsymbol {\nabla }}_{\circ }\cdot \mathbf {v} =\sum _{i=1}^{3}{\frac {\partial v_{i}}{\partial X_{i}}}=v_{i,i}~;~~{\boldsymbol {\nabla }}_{\circ }\cdot {\boldsymbol {S}}=\sum _{i,j=1}^{3}{\frac {\partial S_{ij}}{\partial X_{j}}}~\mathbf {E} _{i}=S_{ij,j}~\mathbf {E} _{i}}$