Contents

GWR Iron Duke class

This article includes a list of general references, but it lacks sufficient corresponding inline citations. Please help to improve this article by introducing more precise citations. (December 2014) (Learn how and when to remove this message)

The Great Western Railway Iron Duke Class 4-2-2 was a class of 7 ft 1⁄4 in (2,140 mm) broad gauge steam locomotives for express passenger train work.

History[edit]

The prototype locomotive, Great Western, was built as a 2-2-2 locomotive in April 1846, but was soon converted to a 4-2-2 arrangement, with the leading wheels set rigidly within the sandwich framing, rather than in a separate bogie.^[1] The remainder of the class entered service between April 1847 and July

The Iron Duke locomotives were fast for their time, and were recorded reaching 78.2 mph (125.9 km/h).^[2] They were used to haul the Flying Dutchman express train, which was the fastest express train in the world for several decades. In 1852, the daily service from London PaddingtontoExeter (194 miles or 312 km) was achieved with an average speed of 53 mph (85 km/h), with the flatter section between London and Swindon covered at an average speed of 59 mph (95 km/h).^[3]

From about 1865, the Iron Duke Class was known as the Alma Class.

In May to July 1870, three locomotives (Great Britain, Prometheus and Estaffete) were extensively rebuilt with new frames and boilers, but retaining their original names. Following these, further locomotives were built to similar specifications, entering service between August 1871 and July 1888. These new locomotives are generally referred to as the Rover class. Although these locomotives took the names of withdrawn locomotives of the original design, they were not rebuilt from them like the first three, but entirely new locomotives (though it is believed that Rover, Swallow and Balaklava may have included some parts from the earlier locomotives of those names).^[4]

Apart from the three conversions, the original locomotives were withdrawn between December 1870 and June 1884. Lord of the Isles (the last to be withdrawn) was initially preserved by the GWR at Swindon Works, but was scrapped in January 1906 owing to the pressure of space. The three conversions were withdrawn between September 1880 and October 1887, while the other locomotives to the later design were all withdrawn with the end of the GWR 7 ft 1⁄4 in (2,140 mm) broad gauge in May 1892 (except Hirondelle, which had been withdrawn in December 1890).

Many of the nameplates can be seen at the National Railway Museum and at the Museum of the Great Western Railway, while the driving wheels from Lord of the Isles can also be seen at Swindon.

Locomotives[edit]

2-2-2 Great Western[edit]

The prototype for this class was named the Great Western and built in 1846. Named after the railway, it was designed to show how the 2-2-2 express engines could be improved; its 8-foot-diameter (2.438 m) driving wheels were one foot (305 mm) larger than those of the successful Fire Fly class. It broke its leading axle after a short while in service and was subsequently rebuilt as a 4-2-2, becoming part of the Iron Duke class.

Iron Duke class[edit]

Iron Duke Class
Hirondelle
Type and origin Power type Steam Designer Daniel Gooch Builder GWR Swindon Works (22) Rothwell and Company (7) Order number Swindon 2nd, 3rd, and 4th Lot Passenger Build date April 1847 – July 1855
Specifications Configuration: ​  • Whyte 4-2-2  • UIC 2A1 n2 Gauge 7 ft 1⁄4 in (2,140 mm) Leading dia. 4 ft 6 in (1.372 m) Driver dia. 8 ft 0 in (2.438 m) Trailing dia. 4 ft 6 in (1.372 m) Wheelbase 2nd Lot Passenger: 4 ft 11 in (1.499 m) + 6 ft 3 in (1.905 m) + 7 ft 4 in (2.235 m) 3rd/4th Lot Passenger: 4 ft9+1⁄4 in (1.454 m) + 6 ft4+1⁄4 in (1.937 m) + 7 ft 7 in (2.311 m) Boiler pressure 100 lbf/in2 (690 kPa), later 115 lbf/in2 (790 kPa) Cylinder size 18 in × 24 in (457 mm × 610 mm)

Rover class[edit]

Rover Class (or Iron Duke Class rebuilt)
DragonatTaunton while working the last broad gauge train from London to Penzance on 20 May 1892
Type and origin Power type Steam Designer Joseph Armstrong Builder Great Western Railway
Specifications Configuration: ​  • Whyte 4-2-2  • UIC 2A1 n2 Gauge 7 ft 1⁄4 in (2,140 mm) Leading dia. 4 ft 6 in (1.372 m) Driver dia. 8 ft 0 in (2.438 m) Trailing dia. 4 ft 6 in (1.37 m) Wheelbase 19 ft 0 in (5.791 m) Cylinder size 18 in × 24 in (457 mm × 610 mm)

Replica[edit]

A working replica of Iron Duke was constructed in 1985 using parts from two Hunslet Austerity tanks for the 'Great Western 150' celebrations. It is part of the National Railway Collection but is currently on long-term loan to the Didcot Railway Centre, which has a section of working broad gauge track.^[9] The boiler certificate has expired so it cannot currently be steamed.^{[citation needed]}

The replica appeared in The Railway Series book Thomas and the Great Railway Show, in which it was portrayed with whiskery eyebrows and a walrus moustache.

Wikimedia Commons has media related to GWR Iron Duke replica.

References[edit]

• Reed, P. J. T. (February 1953). White, D. E. (ed.). The Locomotives of the Great Western Railway, Part 2: Broad Gauge. Kenilworth: RCTS. ISBN 0-901115-32-0.

External links[edit]

• "What was the Broad Gauge?". The Broad Gauge Society.