The 8514 uses a standardised API called the "Adapter Interface" or AI. This interface is also used by XGA, IBM Image Adapter/A, and clones of the 8514/A and XGA such as the ATI TechnologiesMach series and IITAGX. The interface allows computer software to offload common 2D-drawing operations (line-draw, color-fill, and block copies via a blitter) onto the 8514 hardware. This frees the host CPU for other tasks, and greatly improves the speed of redrawing a graphics visual (such as a pie-chartorCAD-illustration).
The 8514 initially sold for $1290 for the adapter and $270 for the 512KB memory expansion (equivalent to $3500 and $720, respectively, in 2023).[3] The 8514/A required a Micro Channel architecture bus at a time when ISA systems were standard.
The 8514 was introduced with the IBM PS/2 computers in April 1987. It was an optional upgrade to the Micro Channel architecture based PS/2's Video Graphics Array (VGA), and was delivered within three months of PS/2's introduction.
Although not the first PC video card to support hardware acceleration, IBM's 8514 is often credited[by whom?] as the first PC mass-market fixed-function accelerator. Up until the 8514's introduction, PC graphics acceleration was relegated to expensive workstation-class, graphics coprocessor boards. Coprocessor boards (such as the TARGA Truevision series) were designed around special CPU or digital signal processor chips which were programmable. Fixed-function accelerators, such as the 8514, sacrificed programmability for better cost/performance ratio.[citation needed]
Even though the 8514 was not a best-seller, it created a market for fixed-function PC graphics accelerators which grew exponentially in the early 1990s. [citation needed]
The ATI Mach8 and Mach 32 chips were popular clones, and several companies (notably S3) designed graphics accelerator chips which were not register compatible but were conceptually very similar to the 8514/A.[4]
The VESA Group introduced a common standardized way to access features like hardware cursors, Bit Block transfers (Bit Blt), off screen sprites, hardware panning, drawing and other functions with VBE/accelerator functions (VBE/AF) in August 1996.
In the late 1980s, several companies cloned the 8514/A often for the ISA bus. Notable among those was Western Digital Imaging's PWGA-1 (also known as the WD9500 chip set), the Chips & Technologies82C480, and ATI'sMach8 and later Mach32 chips. In one way or another, the clones were all better than the original with more speed, enhanced drawing functionality and overall improved video mode selections. Clone support for non-interlaced modes at resolutions like 800×600 and 1280×1024 was typical, and all clones had longer command queues for increased performance.
