Parrel beads (also spelled parral[1]orparrell) are an element of sailing rigging. They act as roller bearings on a parrel, which is a rope or wire strop that typically fastens one spar to another along which it must have some freedom of movement. An example of this is at the jaws of a gaff on a gaff riggedorgunter rigged craft. This allows the gaff to slide up and down the mast as sail is hoisted or lowered, and allows some rotation around the mast as the sail is sheeted in and out to allow for different wind directions.[2] Another example is on the tack of a spinnaker rigged over a furled jib.[3]
A set of parrel beads is formed from small balls, size depending on the application, threaded on a piece of small line and secured with a stopper knot at each end.[2]
One end of the line is usually permanently bent to the movable item. When in use the movable item is positioned where it is required, and the free end of the parrel bead line is passed around the static item and secured back to the movable item. Their function is to secure the movable item in place, but to allow it to move along and around the device.
|
| |||||||
|---|---|---|---|---|---|---|---|
including limited use*, outdated† | |||||||
| Rigs (jury rigging) |
| ||||||
| Sails (sailing rigs) |
| ||||||
| Spars |
| ||||||
| Rigging |
| ||||||
