Contents

BMW M54

Reciprocating internal combustion engine

BMW M54 engine
M54B25 in a E39 525i
Overview
Production	2000–2006
Layout
Configuration	Straight-6
Displacement	2,171 cc (132 cu in) 2,494 cc (152 cu in) 2,979 cc (182 cu in)
Cylinder bore	80 mm (3.1 in) 84 mm (3.3 in)
Piston stroke	72 mm (2.8 in) 75 mm (3.0 in) 89.6 mm (3.53 in)
Cylinder block material	Aluminium
Cylinder head material	Aluminium
Valvetrain	DOHC w/ VVT
Combustion
Fuel type	Petrol
Chronology
Predecessor	BMW M52
Successor	BMW N52

The BMW M54 is a naturally aspirated straight-6 DOHC petrol engine produced from 2000 to 2006. It was released in the E53 X5^[1] and is the replacement for the M52 engine. The S54 is the equivalent high performance engine, used in the E46 M3, the Z3 M Coupé/Roadster and the E85/E86 Z4 M. The BMW M56 SULEV engine (sold in several states of the United States) is based on the M54.

The M54 was phased out following the introduction of the BMW N52 engine in 2004. From 2001 to 2003, the M54 was included on the Ward's 10 Best Engines list.

Design[edit]

Compared with the final versions of its M52 predecessor (called the 'M52TÜ'), the M54 has a non-return fuel system, a fully electronic throttle (without mechanical backup),^[1][2] Siemens MS 43 engine management,^[3] and a revised intake manifold.^[4] The displacement of the largest variant increased from 2.8 L to 3.0 L (2,979 cc), due to an increase in stroke to 89.6 mm (3.53 in).

As per the M52TÜ, the M54 uses an aluminium block and aluminium cylinder head with cast iron cylinder liners. Variable valve timing is fitted to both camshafts^[5] (called "double-VANOS"), a dual length intake manifold (called "DISA") is used and the thermostat is electronically controlled. The redline remains at 6,500 rpm.

There was no "technical update" (TÜ) version of the M54 produced, therefore the engine specifications remained the same throughout its seven-year production run.

Versions[edit]

M54B22[edit]

The 2,171 cc (132.5 cu in) M54B22 produces 125 kW (168 hp) at 6,100 rpm and 210 N⋅m (155 lb⋅ft) at 3,500 rpm.^[6] Bore is 80 mm (3.1 in), stroke is 72 mm (2.8 in) and the compression ratio is 10.8:1.

Applications

• 2000–2006 E46 320i, 320Ci
• 2000–2003 E39 520i
• 2000–2002 E36/7 Z3 2.2i
• 2003–2005 E85 Z4 2.2i
• 2003–2005 E60/E61 520i

M54B25[edit]

The 2,494 cc (152.2 cu in) M54B25 produces 141 kW (189 hp) at 6,000 rpm and 245 N⋅m (181 lb⋅ft) at 3,500 rpm.^[6] Bore is 84 mm (3.3 in), stroke is 75 mm (3.0 in) and the compression ratio is 10.5:1.

Applications

• 2000–2002 E36/7 Z3 2.5i
• 2000–2006 E46 325i, 325xi, 325Ci
• 2000–2004 E46/5 325ti
• 2000–2004 E39 525i
• 2003–2005 E60/E61 525i, 525xi
• 2003–2006 E83 X3 2.5i
• 2002–2005 E85 Z4 2.5i

M54B30[edit]

The 2,979 cc (181.8 cu in) M54B30 is the largest M54 variant and produces 170 kW (228 hp) at 5,900 rpm and 300 N⋅m (221 lb⋅ft) at 3,500 rpm.^[6] Bore is 84 mm (3.3 in), stroke is 89.6 mm (3.5 in) and the compression ratio is 10.2:1.^[7]

In the United States and Canada, a "ZHP" version of the M54B30 used different camshafts and reprogrammed engine management to develop 175 kW (235 hp) at 5,900 rpm and 301 N⋅m (222 lb⋅ft) at 3,500 rpm and have a slightly higher redline of 6,800 rpm (although the Canadian cars still show the limiter at 6,500 rpm on the tachometer).^[8][9]

The M54B30 was on the Ward's 10 Best Engines list through 2001–2003.^[10]

Applications

• 2000–2006 E46 330i, 330xi, 330Ci
• 2000–2004 E39 530i
• 2000–2002 E36/7 Z3 3.0i
• 2003–2005 E60 530i
• 2002–2005 E85 Z4 3.0i
• 2003–2006 E83 X3 3.0i
• 2000–2006 E53 X5 3.0i
• 2002–2005 E65/E66 730i, 730Li
• 2000–2002 Wiesmann MF 30

S54[edit]

BMW S54 engine
S54B32 in a E86 Z4 M Coupé
Overview
Production	2000–2008
Layout
Configuration	straight-6
Displacement	3.2 L (3,246 cc)
Cylinder bore	87 mm (3.4 in)
Piston stroke	91 mm (3.6 in)
Cylinder block material	Cast iron
Cylinder head material	Aluminium
Valvetrain	DOHC w/ VVT
Combustion
Fuel type	Gasoline
Chronology
Predecessor	BMW S50
Successor	BMW S55

The S54 was marketed as the high performance equivalent to the M54, however it is actually more an evolution of the BMW S50 and shares few parts with the M54.^[11] As per the S50, the engine block is made of cast iron, unlike the aluminium engine block used by the M54.^[12] Redline is 8,000 rpm.

Compared with the S50, the S54 features:^[11][13][14]

• Bore increased to 87 mm (3.43 in), resulting in a displacement of 3,246 cc (198.1 cu in)
• Revised camshafts
• Finger follower valve actuation instead of bucket-style tappets
• Compression ratio increased from 11.3:1 to 11.5:1
• Siemens MSS54 engine control unit (MSS70 in the later Z4 M)
• Electronic throttle control
• Scavenging oil pump to avoid oil starvation during cornering (this was also present on the S50B30 of the E36 M3 GT and the S50B32, but not the regular S50B30)

There is no direct successor to the S54, since the following generation E90/E92/E93 M3 was powered by the V8 BMW S65 engine.

In 2014, the S65 engine was replaced with a turbocharged inline-6 engine called the BMW S55. Returning to the I6 configuration, it is considered by some to be the spiritual successor of the S54, though the two have no real engineering connection. This engine was first used in the BMW M3 F80 and BMW M4 F82 then later in the BMW M2 Competition F87.

S54B32[edit]

Variations in power and torque outputs are often due to country-specific emissions regulations, or space constraints of a chassis affecting the layout of the intake/exhaust system.

Applications

• 2000–2006 E46 M3 — produces 252 kW (343 PS; 338 hp) at 7,900 rpm and 365 N⋅m (269 lb⋅ft) at 4,900 rpm. Models for the United States and Canada produce 248 kW (333 hp) and 355 N⋅m (262 lb⋅ft).
• 2000–2002 E36/7 Z3 M Roadster, E36/8 M Coupé — produces 239 kW (325 PS; 321 hp) and 354 N⋅m (261 lb⋅ft). Models for the United States and Canada produce 235 kW (315 hp) and 341 N⋅m (252 lb⋅ft).
• 2002–2011 Wiesmann MF 3 Roadster — produces 252 kW (343 PS; 338 hp) and 365 N⋅m (269 lb⋅ft).^[15][16]
• 2006–2008 E85 Z4 M Roadster, E86 Z4 M Coupé — produces 252 kW (343 PS; 338 hp) and 365 N⋅m (269 lb⋅ft) - Engine code 326S4. Models for the United States and Canada produce 246 kW (330 hp) and 355 N⋅m (262 lb⋅ft). The Z4 M's engine uses a Siemens MSS70 control unit.^[17]

S54B32HP[edit]

An upgraded version of the S54 engine was used in the E46 M3 CSL. This engine is designated S54B32HP and the changes include a revised intake made from carbon fiber, revised camshafts, a MAP sensor (instead of the MAF sensor used in the regular S54),^[3] a lightweight exhaust manifold with a straighter air path (which later became standard on the regular S54) and a straightened intake manifold.^[18]

Applications

• 2003 E46 M3 CSL 265 kW (360 hp), 370 N⋅m (273 lb⋅ft)^[19]
• 2009 Wiesmann MF 3 Roadster "20th Anniversary Edition" — produces 265 kW (360 hp), 370 N⋅m (273 lb⋅ft)

See also[edit]

Wikimedia Commons has media related to BMW M54.

• List of BMW engines

References[edit]