The reduction drive is a choice of two integral gearboxes: the A-type gearbox has a 2.58:1 ratio and can accommodate propellers of up to 4,000 kg/cm2 inertial load; the B-type gearbox has a 3.47:1 ratio and can accommodate propellers of up to 6,000 kg/cm2.[1][3]
The 700E burns 9 L (2.4 US gal) per hour in cruise flight at 4,750 rpm. The recommended time between overhauls is 1000 hours, although this is expected to be increased as experience is gained.[3]
Producing 60 hp (45 kW) at 6,200 rpm for three minutes for take-off and 56 hp (42 kW) at 5,800 rpm continuously, the 700E was designed as a fuel efficient four stroke alternative to the high fuel consumption two stroke engines, such as the Rotax 582.[1][3]
Coupe (facelift)HKS 700E engines from serial number 101105 and above meet ASTM standard 2339-05, which governs the design and manufacture of reciprocating engines for light-sport aircraft. Compliance with the ASTM standard means the aircraft is applicable for use on special or experimental light-sport aircraft (S-LSA or E-LSA).[4]
The company's owner's manual disclaimer states:
WARNING! This is a non-certified aircraft engine, the possibility of engine failure exists at all times. Do not operate this engine over densely populated areas. Do not operate this engine over terrain where a safe, power off landing cannot be performed. The operating and maintenance instructions supplied with this engine must be followed at all times. Flying any aircraft involves the risk of injury or death, building and maintaining your own aircraft requires great personal responsibility.[3]
Initial version, normally aspirated and producing 60 hp (45 kW) at 6200 rpm for three minutes for take-off and 56 hp (42 kW) at 5800 rpm continuously.[1][3]
700T
Turbocharged version with a 62.5 mm (2.5 in) stroke and a compression ratio of 8.8:1, that produces 80 hp (60 kW) at 5300 rpm for three minutes for take-off and 77 hp (57 kW) at 4900 rpm continuously. The engine's dry weight is 57.5 kg (127 lb) equipped with electrical system, electric starter, fuel injectors, gearbox, exhaust system and turbocharger. The initial time between overhauls is recommended as 500 hours, but this is expected to rise with operational experience.[5][6]
Cooling system: free air cylinders, with oil-cooled cylinder heads
Reduction gear: A-type gearbox with 2.58:1 ratio, limit of 4,000kg/cm2 inertial load. The B-type gearbox with 3.47:1 ratio, limit of 6,000kg/cm2 inertial load
Performance
Power output: 60 hp (45 kW) at 6200 rpm for three minutes for take-off and 56 hp (42 kW) at 5800 rpm continuous
