The pumped-storagehydroelectric scheme consists of an upper and a lower dam 4.6 kilometres (2.9 mi) apart and is connected to a power station by tunnels.
The power station uses 4 Francis pump turbines rated at 333 MW each, giving it a total rating of 1332 MW installed capacity.
The pumped-storage hydroelectric plant uses water from the upper reservoir to generate electricity during the peak demand periods of the day. At night, excess power on the grid generated by conventional coal and nuclear plants is used to pump water to the upper reservoir.
The upper Bedford Dam on Bedford stream, a tributary of the Wilge River, was completed in April 2011. It is a 39 m (128 ft) tall concrete-face rock-fill dam. It has a 22,400,000 m3 (18,200 acre⋅ft) water storage capacity of which 19,200,000 m3 (15,600 acre⋅ft) can be used for power generation.
The lower Bramhoek Dam on Bramhoek stream, a tributary of the Klip River, was completed in November 2011. It is a 41 m (135 ft) tall roller-compacted concretegravity dam. It has a 26,300,000 m3 (21,300 acre⋅ft) water storage capacity of which 21,900,000 m3 (17,800 acre⋅ft) can be pumped up to the upper reservoir.
A 2 km (1.2 mi) long headrace tunnel connects the upper reservoir to the underground power station which houses 4 x 333 megawatts (447,000 hp) reversible Francis pump-turbines. The elevation between the two reservoirs affords a hydraulic head (water drop) of 480 m (1,570 ft).
Water from the power station is discharged down a 2.5 km (1.6 mi) long tailrace tunnel to the lower reservoir.[1][5][9]
Water portal
Renewable energy portal
