The numbers of older IEC standards were converted in 1997 by adding 60000; for example IEC 27 became IEC 60027. IEC standards often have multiple sub-part documents; only the main title for the standard is listed here.
IEC 60027 Letter symbols to be used in electrical technology
IEC 60028 International standard of resistance for copper
IEC 60051 Direct acting indicating analogue electrical measuring instruments and their accessories
IEC 60052 Voltage measurement by means of standard air gaps
IEC 60055 Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables)
IEC 60059 IEC standard current ratings
IEC 60060 High-voltage test techniques
IEC 60061 Lamp caps and holders together with gauges for the control of interchangeability and safety
IEC 60062 Marking codes for resistors and capacitors
IEC 60239 Graphite electrodes for electric arc furnaces – Dimensions and designation
IEC 60240 Characteristics of electric infra-red emitters for industrial heating
IEC 60243 Electric strength of insulating materials
IEC 60244 Methods of measurement for radio transmitters
IEC 60245 Rubber insulated cables – Rated voltages up to and including 450/750 V
IEC 60246 Connecting wires having a rated voltage of 20 kV and 25 kV d.c. and a maximum working temperature of 105 °C for use in television receivers
IEC 60247 Insulating liquids – Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
IEC 60250 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
IEC 60252 AC motor capacitors
IEC 60254 Lead-acid traction batteries
IEC 60255 Measuring relays and protection equipment
IEC 60258 Direct acting recording electrical measuring instruments and their accessories
IEC 60261 Sealing test for pressurized waveguide tubing and assemblies
IEC 60263 Scales and sizes for plotting frequency characteristics and polar diagrams
IEC 60270 High-voltage test techniques – Partial discharge measurements
IEC 60273 Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V
IEC 60276 Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings
IEC 60282 High-voltage fuses
IEC 60286 Packaging of components for automatic handling
IEC 60287 Electric cables – Calculation of the current rating
IEC 60294 Measurement of the dimensions of a cylindrical component with axial terminations
IEC 60296 Fluids for electrotechnical applications – Unused mineral insulating oils for transformers and switchgear
IEC 60297 Mechanical structures for electronic equipment – Dimensions of mechanical structures of the 482,6 mm (19 in) series
IEC 60298 high voltage switchgear in metallic enclosure (Withdrawn)
IEC 60299 Household electric blankets – Methods for measuring performance
IEC 60300 Dependability management
IEC 60301 Preferred diameters of wire terminations of capacitors and resistors
IEC 60304 Standard colours for insulation for low-frequency cables and wires
IEC 60305 Insulators for overhead lines with a nominal voltage above 1000 V – Ceramic or glass insulator units for a.c. systems – Characteristics of insulator units of the cap and pin type
IEC 60306 Measurement of photosensitive devices
IEC 60308 Hydraulic turbines – Testing of control systems
IEC 60309 Plugs, socket-outlets and couplers for industrial purposes
IEC 60310 Railway applications – Traction transformers and inductors on board rolling stock
IEC 60311 Electric irons for household or similar use – Methods for measuring performance
IEC 60315 Methods of measurement on radio receivers for various classes of emission
IEC 60317 Specifications for particular types of winding wires
IEC 60318 Electroacoustics – Simulators of human head and ear
IEC 60319 Presentation and specification of reliability data for electronic components
IEC 60320 Appliance couplers for household and similar general purposes
IEC 60322 Railway applications – Electric equipment for rolling stock – Rules for power resistors of open construction
IEC 60325 Radiation protection instrumentation – Alpha, beta and alpha/beta (beta energy >60 keV) contamination meters and monitors
IEC 60329 Strip-wound cut cores of grain oriented silicon-iron alloy, used for electronic and telecommunication equipment
IEC 60331 Tests for electric cables under fire conditions – Circuit integrity
IEC 60332 Tests on electric and optical fibre cables under fire conditions
IEC 60335 Household and similar electrical appliances – Safety
IEC 60336 Medical electrical equipment – X-ray tube assemblies for medical diagnosis – Characteristics of focal spots
IEC 60338 Telemetering for consumption and demand
IEC 60339 General purpose rigid coaxial transmission lines and their associated flange connectors
IEC 60343 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
IEC TR 60344 Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires – Application guide
IEC 60345 Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures
IEC 60347 Transverse track recorders
IEC 60349 Electric traction – Rotating electrical machines for rail and road vehicles
IEC 60350 Household electric cooking appliances
IEC 60352 Solderless connections
IEC 60353 Line traps for a.c. power systems
IEC 60356 Dimensions for commutators and slip-rings
IEC 60384 Fixed capacitors for use in electronic equipment
IEC 60386 Method of measurement of speed fluctuations in sound recording and reproducing equipment
IEC 60392 Guide for the drafting of specifications for microwave ferrites
IEC 60393 Potentiometers for use in electronic equipment
IEC 60394 Varnished fabrics for electrical purposes
IEC 60397 Test methods for batch furnaces with metallic heating resistors
IEC 60398 Installations for electroheating and electromagnetic processing – General performance test methods
IEC 60399 Barrel thread for lampholders with shade holder ring
IEC 60400 Lampholders for tubular fluorescent lamps and starter holders
IEC 60401 Terms and nomenclature for cores made of magnetically soft ferrites
IEC 60404 Magnetic materials
IEC 60412 Nuclear instrumentation – Nomenclature (identification) of scintillators and scintillation detectors and standard dimensions of scintillators
IEC 60413 Test procedures for determining physical properties of brush materials for electrical machines
IEC 60417 Graphical symbols for use on equipment
IEC 60422 Mineral insulating oils in electrical equipment – Supervision and maintenance guidance
IEC 60423 Conduit systems for cable management – Outside diameters of conduits for electrical installations and threads for conduits and fittings
IEC 60424 Ferrite cores – Guidelines on the limits of surface irregularities
IEC 60426 Electrical insulating materials – Determination of electrolytic corrosion caused by insulating materials – Test methods
IEC 60433 Insulators for overhead lines with a nominal voltage above 1 000 V – Ceramic insulators for a.c. systems – Characteristics of insulator units of the long rod type
IEC 60434 Aircraft electrical filament lamps
IEC 60436 Electric dishwashers for household use – Methods for measuring the performance
IEC 60437 Radio interference test on high-voltage insulators
IEC 60439 Low voltage switchgear and control gear assemblies (Withdrawn)
IEC 60440 Method of measurement of non-linearity in resistors
IEC 60441 Photometric and colorimetric methods of measurement of the light emitted by a cathode-ray tube screen
IEC 60442 Electric toasters for household and similar purposes – Methods for measuring the performance
IEC 60444 Measurement of quartz crystal unit parameters by zero phase technique in a pi-network
IEC 60445 Basic and safety principles for man-machine interface, marking and identification – Identification of equipment terminals, conductor terminations and conductors
IEC 60446 Wiring colours (Withdrawn, replaced by IEC 60445:2010)
IEC 60447 Basic and safety principles for man-machine interface, marking and identification – Actuating principles
IEC 60450 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
IEC 60454 Specifications for pressure-sensitive adhesive tapes for electrical purposes
IEC 60455 Resin based reactive compounds used for electrical insulation
IEC 60456 Clothes washing machines for household use – Methods for measuring the performance
IEC 60457 Rigid precision coaxial and their associated precision connectors
IEC 60461 Time and control code
IEC 60462 Nuclear instrumentation – Photomultiplier tubes for scintillation counting – Test procedures
IEC 60464 Varnishes used for electrical insulation
IEC 60465 Specification for unused insulating mineral oils for cables with oil ducts
IEC 60468 Method of measurement of resistivity of metallic materials
IEC 60469 Transitions, pulses and related waveforms – Terms, definitions and algorithms
IEC 60471 Dimensions of clevis and tongue couplings of string insulator units
IEC 60475 Method of sampling insulating liquids
IEC 60477 Laboratory d.c. resistors
IEC 60479 Effects of current on human beings and livestock
IEC 60480 Guidelines for the checking and treatment of sulfur hexafluoride (SF6) taken from electrical equipment and specification for its re-use
IEC 60481 Coupling devices for power line carrier systems
IEC 60483 Guide to dynamic measurements of piezoelectric ceramics with high electromechanical coupling
IEC 60487 Methods of measurement for equipment used in terrestrial radio-relay systems
IEC 60488 Higher performance protocol for the standard digital interface for programmable instrumentation
IEC 60489 Methods of measurement for radio equipment used in the mobile services
IEC 60493 Guide for the statistical analysis of ageing test data
IEC 60494 Railway applications – Rolling stock – Pantographs – Characteristics and tests
IEC 60495 Single sideband power-line carrier terminals
IEC 60496 Methods for measuring the performance of electric warming plates for household and similar purposes
IEC 60498 High-voltage coaxial connectors used in nuclear instrumentation
IEC 60499 Voltage limits for electronics to be considered "consumer grade"
IEC 60500 Underwater acoustics – Hydrophones – Properties of hydrophones in the frequency range 1 Hz to 500 kHz
IEC 60502 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV)
IEC 60503 Spools for broadcast videotape recorders (VTRS)
IEC 60505 Evaluation and qualification of electrical insulation systems
IEC 60507 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems
IEC 60510 Methods of measurement for radio equipment used in satellite earth stations
IEC 60512 Connectors for electronic equipment – Tests and measurements
IEC TR 60513 Fundamental aspects of safety standards for medical electrical equipment
IEC 60515 Nuclear power plants – Instrumentation important to safety – Radiation detectors – Characteristics and test methods
IEC 60519 Safety in installations for electroheating and electromagnetic processing
IEC 60522 Determination of the permanent filtration of X-ray tube assemblies
IEC 60524 Direct-current resistive volt ratio boxes
IEC 60526 High-voltage cable plug and socket connections for medical X-ray equipment
IEC 60528 Expression of performance of air quality infra-red analyzers
IEC 60529 Degrees of protection provided by enclosures (IP Code)
IEC 60530 Methods for measuring the performance of electric kettles and jugs for household and similar use
IEC 60531 Household electric thermal storage room heaters – Methods for measuring performance
IEC 60532 Radiation protection instrumentation – Installed dose rate meters, warning assemblies and monitors – X and gamma radiation of energy between 50 keV and 7 MeV
IEC 60533 Electrical and electronic installations in ships – Electromagnetic compatibility (EMC) – Ships with a metallic hull
IEC 60534 Industrial-process control valves
IEC 60539 Directly heated negative temperature coefficient thermistors
IEC 60544 Electrical insulating materials – Determination of the effects of ionizing radiation
IEC 60545 Guide for commissioning, operation and maintenance of hydraulic turbines
IEC 60546 Controllers with analogue signals for use in industrial-process control systems
IEC 60549 High-voltage fuses for the external protection of shunt capacitors
IEC 60554 Specification for cellulosic papers for electrical purposes
IEC 60556 Gyromagnetic materials intended for application at microwave frequencies – Measuring methods for properties
IEC 60560 Definitions and terminology of brush-holders for electrical machines
IEC 60562 Measurements of incidental ionizing radiation from electronic tubes
IEC 60564 D.C. bridges for measuring resistance
IEC 60565 Underwater acoustics – Hydrophones – Calibration in the frequency range 0,01 Hz to 1 MHz
IEC 60567 Oil-filled electrical equipment – Sampling of gases and analysis of free and dissolved gases – Guidance
IEC 60568 Nuclear power plants – Instrumentation important to safety – In-core instrumentation for neutron fluence rate (flux) measurements in power reactors
IEC 60570 Electrical supply track systems for luminaires
IEC 60571 Railway applications – Electronic equipment used on rolling stock
IEC 60574 Audio-visual, video and television equipment and systems (Withdrawn)
IEC TR 60575 Thermal-mechanical performance test and mechanical performance test on string insulator units
IEC 60580 Medical electrical equipment – Dose area product meters
IEC 60581 High fidelity audio equipment and systems: Minimum performance requirements
IEC 60648 Method of test for coefficients of friction of plastic film and sheeting for use as electrical insulation
IEC 60651 Sound level meters (Withdrawn, replaced by IEC 61672-1:2002 and IEC 61672-2:2003)
IEC 60652 Loading tests on overhead line structures
IEC 60654 Industrial-process measurement and control equipment – Operating conditions
IEC 60657 Non-ionizing radiation hazards in the frequency range from 10 MHz to 300 000 MHz
IEC 60660 Insulators – Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV
IEC 60661 Methods for measuring the performance of electric household coffee makers
IEC 60679 Piezoelectric, dielectric and electrostatic oscillators of assessed quality
IEC TS 60680 Test methods of plasma equipment for electroheat and electrochemical applications
IEC 60682 Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps
IEC 60683 Industrial electroheating equipment – Test methods for submerged-arc furnaces
IEC 60684 Flexible insulating sleeving
IEC 60688 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals
IEC 60689 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
IEC 60691 Thermal-links – Requirements and application guide
IEC 60692 Nuclear instrumentation – Density gauges utilizing ionizing radiation – Definitions and test methods
IEC 60694 Common Specifications For High-Voltage Switchgear and Control gear Standards (Withdrawn, replaced by IEC 62271-1:2007)
IEC 60695 Fire hazard testing
IEC 60700 Thyristor valves for high voltage direct current (HVDC) power transmission
IEC 60702 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V
IEC 60703 Test methods for electroheating installations with electron guns
IEC 60704 Household and similar electrical appliances – Test code for the determination of airborne acoustical noise
IEC 60705 Household microwave ovens – Methods for measuring performance
IEC 60706 Maintainability of equipment
IEC 60708 Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath
IEC 60709 Nuclear power plants – Instrumentation and control systems important to safety – Separation
IEC 60712 Helical-scan video-tape cassette system using 19 mm (3/4 in) magnetic tape, known as U-format
IEC 60713 Subroutines for CAMAC
IEC 60715 Dimensions of low-voltage switchgear and control gear – Standardized mounting on rails for mechanical support of switchgear, control gear and accessories
IEC 60717 Method for the determination of the space required by capacitors and resistors with unidirectional terminations
IEC 60719 Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V
IEC 60720 Characteristics of line post insulators
IEC 60721 Classification of environmental conditions
IEC 60724 Short-circuit temperature limits of electric cables with rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
IEC TR 60725 Consideration of reference impedances and public supply network impedances for use in determining the disturbance characteristics of electrical equipment having a rated current ≤75 A per phase
IEC 60726 Dry type power transformers
IEC 60728 Cable networks for television signals, sound signals and interactive services
IEC 60729 Multiple controllers in a CAMAC crate
IEC 60730 Automatic electrical controls
IEC 60731 Medical electrical equipment – Dosimeters with ionization chambers as used in radiotherapy
IEC 60732 Measuring methods for cylinder cores, tube cores and screw cores of magnetic oxides
IEC 60734 Household electrical appliances – Performance – Water for testing
IEC 60735 Measuring methods for video tape properties
IEC TR 60736 Testing equipment for electrical energy meters
IEC 60737 Nuclear power plants – Instrumentation important to safety – Temperature sensors (in-core and primary coolant circuit) – Characteristics and test methods
IEC 60738 Thermistors – Directly heated positive temperature coefficient
IEC 60740 Laminations for transformers and inductors
IEC 60743 Live working – Terminology for tools, devices and equipment
IEC 60744 Safety logic assemblies of nuclear power plants – Characteristics and test methods
IEC 60745 Hand-held motor-operated electric tools – Safety
IEC 60746 Expression of performance of electrochemical analyzers
IEC 60758 Synthetic quartz crystal – Specifications and guidelines for use
IEC 60759 Standard test procedures for semiconductor X-ray energy spectrometers
IEC 60760 Flat, quick-connect terminations (merged into IEC 61210:2010-08)
IEC 60761 Equipment for continuous monitoring of radioactivity in gaseous effluents
IEC 60763 Laminated pressboard for electrical purposes
IEC 60767 Helical-scan video-tape cassette system using 12.65 mm (0.5 in) magnetic tape on type beta-format
IEC 60768 Nuclear power plants – Instrumentation important to safety – Equipment for continuous in-line or on-line monitoring of radioactivity in process streams for normal and incident conditions
IEC 60770 Transmitters for use in industrial-process control systems
IEC 60772 Electrical penetration assemblies in containment structures for nuclear power generating stations
IEC 60773 Test methods and apparatus for measurement of the operational characteristics of brushes
IEC 60774 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS
IEC 60775 Real-time BASIC for CAMAC
IEC TR 60778 Brush-holders for slip-rings, Group R – type RA
IEC 60779 Industrial electroheat equipment – Test methods for electroslag remelting furnaces
IEC TR 60782 Measurements of ultrasonic magnetostrictive transducers
IEC TR 60788 Medical electrical equipment – Glossary of defined terms
IEC 60800 Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation
IEC 60801 EMI and RFI Immunity (Withdrawn)
IEC 60803 Recommended dimensions for hexagonal and square crimping-die cavities, indentors, ganges, outer conductor crimp sleeves and centre contact crimp barrels for R.F. cables and connectors
IEC 60805 Guide for commissioning, operation and maintenance of storage pumps and of pump-turbines operating as pumps
IEC 60806 Determination of the maximum symmetrical radiation field from a rotating anode X-ray tube for medical diagnosis
IEC 60807 Rectangular connectors for frequencies below 3 MHz
IEC 60809 Lamps for road vehicles – Dimensional, electrical and luminous requirements
IEC 60810 Lamps for road vehicles – Performance requirements
IEC 60811 Electric and optical fibre cables – Test methods for non-metallic materials
IEC 60828 Pin allocations for microprocessor systems using the IEC 60603-2connector
IEC 60831 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V
IEC 60832 Live working – Insulating sticks and attachable devices
IEC 60834 Tele-protection equipment of power systems – Performance and testing
IEC 60835 Methods of measurement for equipment used in digital microwave radio transmission systems
IEC 60836 Specifications for unused silicone insulating liquids for electrotechnical purposes
IEC 60838 Miscellaneous lampholders
IEC 60839 Alarm and electronic security systems
IEC 60840 Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) – Test methods and requirements
IEC 60841 Audio recording – PCM encoder/decoder system
IEC 60843 Helical-scan video tape cassette system using 8 mm magnetic tape – 8 mm video
IEC 60846 Radiation protection instrumentation – Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation
IEC TR 60877 Procedures for ensuring the cleanliness of industrial-process measurement and control equipment in oxygen service
IEC TR 60878 Graphical symbols for electrical equipment in medical practice
IEC 60879 Performance and construction of electric circulating fans and regulators
IEC 60880 Nuclear power plants – Instrumentation and control systems important to safety – Software aspects for computer-based systems performing category A functions
IEC 60882 Pre-heat requirements for starterless tubular fluorescent lamps
IEC 60883 Measuring method for chrominance signal-to-random noise ratio for video tape recorders
IEC 60884 Plugs and socket-outlets for household and similar purposes
IEC 60885 Electrical test methods for electric cables
IEC TR 60886 Investigations on test procedures for ultrasonic cleaners
IEC TR 60887 Glass bulb designation system for lamps
IEC 60888 Zinc-coated steel wires for stranded conductors
IEC 60889 Hard-drawn aluminium wire for overhead line conductors
IEC TR 60890 A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation
IEC 60891 Photovoltaic devices – Procedures for temperature and irradiance corrections to measured I-V characteristics
IEC 60893 Insulating materials – Industrial rigid laminated sheets based on thermosetting resins for electrical purposes
IEC 60895 Live working – Conductive clothing for use at nominal voltage up to 800 kV a.c. and +/- 600 kV d.c.
IEC 60896 Stationary lead-acid batteries
IEC 60897 Methods for the determination of the lightning breakdown voltage of insulating liquids
IEC 60898 Electrical accessories – Circuit-breakers for overcurrent protection for household and similar installations
IEC TS 60899 Sampling rate and source encoding for professional digital audio recording
IEC 60900 Live working – Hand tools for use up to 1 000 V a.c. and 1 500 V d.c.
IEC 60915 Capacitors and resistors for use in electronic equipment – Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components
IEC 60917 Modular order for the development of mechanical structures for electronic equipment practices
IEC 60918 PVC insulated ribbon cable with a pitch of 1.27 mm suitable for insulation displacement termination
IEC TR 60919 Performance of high-voltage direct current (HVDC) systems with line-commutated converters
IEC 60923 Auxiliaries for lamps – Ballasts for discharge lamps (excluding tubular fluorescent lamps) – Performance requirements
IEC 60927 Auxiliaries for lamps – Starting devices (other than glow starters)- Performance requirements
IEC 60929 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps – Performance requirements
IEC TR 60930 Guidelines for administrative, medical and nursing staff concerned with the safe use of medical electrical equipment and medical electrical systems
IEC 60931 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V
IEC 60933 Audio, video and audiovisual systems – Interconnections and matching values
IEC 60934 Circuit-breakers for equipment (CBE)
IEC 60935 Nuclear instrumentation – Modular high speed data acquisition system – FASTBUS
IEC 60938 Fixed inductors for electromagnetic interference suppression
IEC 60940 Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression
IEC 60942 Electroacoustics – Sound calibrators
IEC TR 60943 Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals
IEC 60944 Guide for the maintenance of silicone transformer liquids
IEC 60945 Maritime navigation and radiocommunication equipment and systems – General requirements – Methods of testing and required test results
IEC 60946 Binary direct voltage signals for process measurement and control systems
IEC 60947 Low-voltage switchgear and control gear
IEC 60948 Numeric keyboard for home electronic systems (HES)
IEC 60949 Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
IEC 60950 Information technology equipment – Safety
IEC 60951 Nuclear power plants – Instrumentation important to safety – Radiation monitoring for accident and post-accident conditions
IEC 60952 Aircraft batteries
IEC 60953 Rules for steam turbine thermal acceptance tests
IEC 60960 Functional design criteria for a safety parameter display system for nuclear power stations
IEC 60961 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type L
IEC 60963 Specification for unused polybutenes
IEC 60964 Nuclear power plants – Control rooms – Design
IEC 60965 Nuclear power plants – Control rooms – Supplementary control room for reactor shutdown without access to the main control room
IEC 60966 Radio frequency and coaxial cable assemblies
IEC 60968 Self-ballasted fluorescent lamps for general lighting services – Safety requirements
IEC 60969 Self-ballasted compact fluorescent lamps for general lighting services – Performance requirements
IEC 60970 Insulating liquids – Methods for counting and sizing particles
IEC 60973 Test procedures for germanium gamma-ray detectors
IEC 60974 Arc welding equipment
IEC 60976 Medical electrical equipment – Medical electron accelerators – Functional performance characteristics
IEC TR 60977 Medical electrical equipment – Medical electron accelerators – Guidelines for functional performance characteristics
IEC 60979 Wires for wire wrapping applications
IEC 60980 Recommended practices for seismic qualification of electrical equipment of the safety system for nuclear generating stations
IEC 60981 Extra heavy-duty electrical rigid steel conduits
IEC 60982 Level measuring systems utilizing ionizing radiation with continuous or switching output
IEC 60983 Miniature lamps
IEC 60984 Live working – Electrical insulating sleeves
IEC 60986 Short-circuit temperature limits of electric cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
IEC 60987 Nuclear power plants – Instrumentation and control important to safety – Hardware design requirements for computer-based systems
IEC 60988 Nuclear power plants – Instrumentation important to safety – Acoustic monitoring systems for detection of loose parts: characteristics, design criteria and operational procedures
IEC 60989 Separating transformers, autotransformers, variable transformers and reactors
IEC 60990 Methods of measurement of touch current and protective conductor current
IEC 60993 Electrolyte for vented nickel-cadmium cells
IEC 60994 Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)
IEC TR 60996 Method for verifying accuracy of tan delta measurements applicable to capacitors
IEC 60998 Connecting devices for low-voltage circuits for household and similar purposes
IEC 60999 Connecting devices – Electrical copper conductors – Safety requirements for screw-type and screwless-type clamping units
IEC 61009 Residual current operated circuit breakers with integral overcurrent protection for household and similar uses (RCBOs)
IEC 61010 Safety requirements for electrical equipment for measurement, control, and laboratory use
IEC 61012 Filters for the measurement of audible sound in the presence of ultrasound
IEC 61014 Programmes for reliability growth
IEC TR 61015 Brush-holders for electrical machines. Guide to the measurement of the static thrust applied to brushes
IEC 61016 Helical-scan digital component video cassette recording system using 19 mm magnetic tape (format D-1)
IEC 61017 Radiation protection instrumentation – Transportable, mobile or installed equipment to measure photon radiation for environmental monitoring
IEC 61018 Surface acoustic wave (SAW) resonators
IEC 61020 Electromechanical switches for use in electrical and electronic equipment
IEC 61021 Laminated core packages for transformers and inductors used in telecommunication and electronic equipment
IEC 61023 Maritime navigation and radiocommunication equipment and systems – Marine speed and distance measuring equipment (SDME) – Performance requirements, methods of testing and required test results
IEC 61024 Protection of structures against lightning (Withdrawn, replaced by parts of IEC 62305)
IEC 61031 Design, location and application criteria for installed area gamma radiation dose rate monitoring equipment for use in nuclear power plants during normal operation and anticipated operational occurrences
IEC 61032 Protection of persons and equipment by enclosures – Probes for verification
IEC 61033 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
IEC 61034 Measurement of smoke density of cables burning under defined conditions
IEC 61039 Classification of insulating liquids
IEC 61041 Non-broadcast video tape recorders. Methods of measurement
IEC 61043 Electroacoustics – Instruments for the measurement of sound intensity – Measurements with pairs of pressure sensing microphones
IEC TR 61044 Opportunity-charging of lead-acid traction batteries
IEC 61047 DC or AC supplied electronic step-down converters for filament lamps – Performance requirements
IEC 61048 Auxiliaries for lamps – Capacitors for use in tubular fluorescent and other discharge lamp circuits – General and safety requirements
IEC 61049 Capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements
IEC 61050 Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers). General and safety requirements
IEC 61051 Varistors for use in electronic equipment
IEC 61052 IEC 1052 FASTBUS standard routines. Standard routines for use with FASTBUS data acquisition system
IEC 61053 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type Beta format – FM audio recording
IEC TR 61055 Measurement techniques and operational adjustments of broadcast VTRs
IEC 61056 General purpose lead-acid batteries (valve-regulated types)
IEC 61109 Insulators for overhead lines – Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V – Definitions, test methods and acceptance criteria
IEC 61111 Live working – Electrical insulating matting
IEC 61112 Live working – Electrical insulating blankets
IEC 61114 Receiving antennas for satellite broadcast transmissions in the 11/12 GHz band
IEC 61115 Expression of performance of sample handling systems for process analyzers
IEC 61116 Electromechanical equipment guide for small hydroelectric installations
IEC 61118 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape – Type M2
IEC 61119 Digital audio tape cassette system (DAT)
IEC 61120 Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use
IEC 61121 Tumble dryers for household use – Methods for measuring the performance
IEC 61123 Reliability testing – Compliance test plans for success ratio
IEC 61124 Reliability testing – Compliance tests for constant failure rate and constant failure intensity
IEC 61125 Unused hydrocarbon based insulating liquids – Test methods for evaluating the oxidation stability
IEC 61126 Procedure for use in the preparation of maximum lamp outlines
IEC TR 61127 High pressure xenon short arc lamps – Dimensional, electrical and photometric data and cap types
IEC 61171 Radiation protection instrumentation – Monitoring equipment – Atmospheric radioactive iodines in the environment
IEC 61172 Radiation protection instrumentation – Monitoring equipment – Radioactive aerosols in the environment
IEC 61174 Maritime navigation and radiocommunication equipment and systems – Electronic chart display and information system (ECDIS) – Operational and performance requirements, methods of testing and required test results
IEC 61175 Industrial systems, installations and equipment and industrial products – Designation of signals
IEC 61176 Hand-held electric mains voltage operated circular saws – Methods for measuring the performance
IEC 61178 Quartz crystal units – A specification in the IEC Quality Assessment System for Electronic Components (IECQ)
IEC 61179 Helical-scan digital composite video cassette recording system using 19 mm magnetic tape, format D2 (NTSC, PAL, PAL-M)
IEC 61180 High-voltage test techniques for low-voltage equipment – Definitions, test and procedure requirements, test equipment
IEC 61181 Mineral oil-filled electrical equipment – Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
IEC PAS 61182 Generic requirements for printed board assembly products manufacturing description data and transfer methodology
IEC 61183 Electroacoustics – Random-incidence and diffuse-field calibration of sound level meters
IEC 61184 Bayonet lampholders
IEC 61187 Electrical and electronic measuring equipment – Documentation
IEC 61188 Printed boards and printed board assemblies – Design and use
IEC 61189 Test methods for electrical materials, interconnection structures and assemblies
IEC 61190 Attachment materials for electronic assembly
IEC 61191 Printed board assemblies
IEC 61192 Workmanship requirements for soldered electronic assemblies
IEC 61193 Quality assessment systems
IEC 61194 Characteristic parameters of stand-alone photovoltaic (PV) systems (Withdrawn, replaced by IEC TS 61836:2007)
IEC 61211 Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V – Impulse puncture testing in air
IEC 61212 Insulating materials – Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes
IEC 61213 Analogue audio recording on video tape – Polarity of magnetization
IEC 61215 Terrestrial photovoltaic (PV) modules – Design qualification and type approval
IEC 61217 Radiotherapy equipment – Coordinates, movements and scales
IEC 61219 Live working – Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device – Lance earthing
IEC 61223 Evaluation and routine testing in medical imaging departments
IEC 61224 Nuclear reactors – Response time in resistance temperature detectors (RTD) – In situ measurements
IEC 61225 Nuclear power plants – Instrumentation and control systems important to safety – Requirements for electrical supplies
IEC 61226 Nuclear power plants – Instrumentation and control important to safety – Classification of instrumentation and control functions
IEC 61227 Nuclear power plants – Control rooms – Operator controls
IEC 61228 Fluorescent ultraviolet lamps used for tanning – Measurement and specification method
IEC 61229 Rigid protective covers for live working on a.c. installations
IEC 61230 Live working – Portable equipment for earthing or earthing and short-circuiting
IEC 61231 International lamp coding system (ILCOS)
IEC 61232 Aluminium-clad steel wires for electrical purposes
IEC 61234 Method of test for the hydrolytic stability of electrical insulating materials
IEC 61235 Live working – Insulating hollow tubes for electrical purposes
IEC 61236 Live working – Saddles, stick clamps and their accessories
IEC 61237 Broadcast video tape recorders – Methods of measurement
IEC 61238 Compression and mechanical connectors for power cables for rated voltages up to 30 kV (Um = 36 kV)
IEC 61239 Nuclear instrumentation – Portable gamma radiation meters and spectrometers used for prospecting – Definitions, requirements and calibration
IEC 61240 Piezoelectric devices – Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection – General rules
IEC 61241 Electrical apparatus for use in the presence of combustible dust (Withdrawn)
IEC 61242 Electrical accessories – Cable reels for household and similar purposes
IEC 61243 Live working – Voltage detectors
IEC TS 61244 Determination of long-term radiation ageing in polymers
IEC TS 61245 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems
IEC 61247 PM-cores made of magnetic oxides and associated parts – Dimensions
IEC 61248 Transformers and inductors for use in electronic and telecommunication equipment
IEC 61249 Materials for printed boards and other interconnecting structures
IEC 61250 Nuclear reactors – Instrumentation and control systems important for safety – Detection of leakage in coolant systems
IEC 61251 Electrical insulating materials and systems – AC voltage endurance evaluation
IEC 61252 Electroacoustics – Specifications for personal sound exposure meters
IEC 61253 Piezoelectric ceramic resonators – A specification in the IEC quality assessment system for electronic components (IECQ)
IEC 61254 Electric shavers for household use – Methods for measuring the performance
IEC 61256 Radiation protection instrumentation – Installed monitors for the detection of radioactive contamination of laundry
IEC TR 61258 Guidelines for the development and use of medical electrical equipment educational materials
IEC 61260 Electroacoustics – Octave-band and fractional-octave-band filters
IEC 61261 Piezoelectric ceramic filters for use in electronic equipment – A specification in the IEC quality assessment system for electronic components (IECQ)
IEC 61262 Medical electrical equipment – Characteristics of electro-optical X-ray image intensifiers
IEC 61265 Electroacoustics – Instruments for measurement of aircraft noise – Performance requirements for systems to measure one-third-octave-band sound pressure levels in noise certification of transport-category aeroplanes
IEC 61266 Ultrasonics – Hand-held probe Doppler foetal heartbeat detectors – Performance requirements and methods of measurement and reporting
IEC 61267 Medical diagnostic X-ray equipment – Radiation conditions for use in the determination of characteristics
IEC 61270 Capacitors for microwave ovens
IEC 61274 Fibre optic interconnecting devices and passive components – Adaptors for fibre optic connectors
IEC 61275 Radiation protection instrumentation – Measurement of discrete radionuclides in the environment – In situ photon spectrometry system using a germanium detector
IEC 61277 Terrestrial photovoltaic (PV) power generating systems – General and guide (Withdrawn)
IEC 61280 Fibre optic communication subsystem basic test procedures
IEC 61281 Fibre optic communication subsystems
IEC TR 61282 Fibre optic communication system design guides
IEC 61284 Overhead lines – Requirements and tests for fittings
IEC 61285 Industrial-process control – Safety of analyser houses
IEC 61286 Character set with electrotechnical symbols (Withdrawn)
IEC 61287 Railway applications – Power converters installed on board rolling stock
IEC TR 61289 High frequency surgical equipment – Operation and maintenance
IEC 61318 Live working – Conformity assessment applicable to tools, devices and equipment
IEC 61319 Interconnections of satellite receiving equipment
IEC 61322 Radiation protection instrumentation – Installed dose equivalent rate meters, warning assemblies and monitors for neutron radiation of energy from thermal to 15 MeV
IEC 61325 Insulators for overhead lines with a nominal voltage above 1000 V – Ceramic or glass insulator units for d.c. systems – Definitions, test methods and acceptance criteria
IEC 61326 Electrical equipment for measurement, control and laboratory use – EMC requirements
IEC 61327 Helical-scan digital composite video cassette recording system using 12,65 mm (0,5 in) magnetic tape – Format D-3
IEC 61328 Live working – Guidelines for the installation of transmission and distribution line conductors and earth wires – Stringing equipment and accessory items
IEC 61329 Sound system equipment – Methods of measuring and specifying the performance of sounders (electroacoustic transducers for tone production)
IEC 61331 Protective devices against diagnostic medical X-radiation
IEC 61341 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
IEC 61343 Nuclear reactor instrumentation – Boiling light water reactors (BWR) – Measurements in the reactor vessel for monitoring adequate cooling within the core
IEC 61345 UV test for photovoltaic (PV) modules (Withdrawn)
IEC 61346 Industrial systems, installations and equipment and industrial products – Structuring principles and reference designations (Withdrawn, replaced by IEC 81346)
IEC 61347 Lamp control gear
IEC TR 61352 Mnemonics and symbols for integrated circuits
IEC 61355 Classification and designation of documents for plants, systems and equipment
IEC 61360 Standard data element types with associated classification scheme
IEC 61362 Guide to specification of hydraulic turbine control systems
IEC 61363 Electrical installations of ships and mobile and fixed offshore units
IEC TR 61364 Nomenclature for hydroelectric powerplant machinery
IEC 61427 Secondary cells and batteries for renewable energy storage – General requirements and methods of test
IEC 61429 Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135
IEC TS 61430 Secondary cells and batteries – Test methods for checking the performance of devices designed for reducing explosion hazards – Lead-acid starter batteries
IEC TR 61431 Guide for the use of monitor systems for lead-acid traction batteries
IEC 61434 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Guide to designation of current in alkaline secondary cell and battery standards
IEC 61435 Nuclear instrumentation – High-purity germanium crystals for radiation detectors – Measurement methods of basic characteristics
IEC TR 61438 Possible safety and health hazards in the use of alkaline secondary cells and batteries – Guide to equipment manufacturers and users
IEC 61439 Low-voltage switchgear and control gear assemblies
IEC 61442 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
IEC 61443 Short-circuit temperature limits of electric cables with rated voltages above 30 kV (Um = 36 kV)
IEC 61445 Digital Test Interchange Format (DTIF)
IEC 61452 Nuclear instrumentation – Measurement of gamma-ray emission rates of radionuclides – Calibration and use of germanium spectrometers
IEC 61453 Nuclear instrumentation – Scintillation gamma ray detector systems for the assay of radionuclides – Calibration and routine tests
IEC 61462 Composite hollow insulators – Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V – Definitions, test methods, acceptance criteria and design recommendations
IEC TS 61463 Bushings – Seismic qualification
IEC TS 61464 Insulated bushings – Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the main insulation (generally paper)
IEC 61466 Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V
IEC 61467 Insulators for overhead lines – Insulator strings and sets for lines with a nominal voltage greater than 1 000 V – AC power arc tests
IEC 61468 Nuclear power plants – In-core instrumentation – Characteristics and test methods of self-powered neutron detectors
IEC 61472 Live working – Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV – A method of calculation
IEC 61477 Live working – Minimum requirements for the utilization of tools, devices and equipment
IEC 61478 Live working – Ladders of insulating material
IEC 61479 Live working – Flexible conductor covers (line hoses) of insulating material
IEC 61481 Live working – Phase comparators
IEC 61482 Live working – Protective clothing against the thermal hazards of an electric arc
IEC 61496 Safety of machinery – Electro-sensitive protective equipment
IEC 61497 Nuclear power plants – Electrical interlocks for functions important to safety – Recommendations for design and implementation
IEC 61500 Nuclear power plants – Instrumentation and control important to safety – Data communication in systems performing category A functions
IEC 61501 Nuclear reactor instrumentation – Wide range neutron fluence rate meter – Mean square voltage method
IEC 61502 Nuclear power plants – Pressurized water reactors – Vibration monitoring of internal structures
IEC 61504 Nuclear power plants – Instrumentation and control systems important to safety – Plant-wide radiation monitoring
IEC 61506 Industrial-process measurement and control – Documentation of application software
IEC 61508 Functional safety of electrical/electronic/programmable electronic safety-related systems
IEC 61511 Functional safety – safety instrumented systems for the process industry sector
IEC 61512 Batch control
IEC 61513 Nuclear power plants – Instrumentation and control important to safety – General requirements for systems
IEC 61514 Industrial process control systems – Methods of evaluating the performance of valve positioners with pneumatic outputs
IEC 61515 Mineral insulated thermocouple cables and thermocouples
IEC 61518 Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 BAR (41,3 MPa)
IEC 61520 Metal thermowells for thermometer sensors – Functional dimensions
IEC 61523 Delay and Power Calculation Standards
IEC 61526 Radiation protection instrumentation – Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations – Direct reading personal dose equivalent meters
IEC 61534 Powertrack systems
IEC 61535 Installation couplers intended for permanent connection in fixed installations
IEC 61537 Cable management – Cable tray systems and cable ladder systems
IEC 61540 Electrical accessories – Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)
IEC 61543 Residual current-operated protective devices (RCDs) for household and similar use – Electromagnetic compatibility
IEC 61545 Connecting devices – Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units
IEC 61547 Equipment for general lighting purposes – EMC immunity requirements
IEC 61557 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures
IEC 61558 Safety of power transformers, power supplies, reactors and similar products
IEC 61559 Radiation protection instrumentation in nuclear facilities – Centralized systems for continuous monitoring of radiation and/or levels of radioactivity
IEC 61560 Radiation protection instrumentation – Apparatus for non-destructive radiation tests of fur and other cloth samples
IEC 61562 Radiation protection instrumentation – Portable equipment for measuring specific activity of beta-emitting radionuclides in foodstuffs
IEC 61563 Radiation protection instrumentation – Equipment for measuring specific activity of gamma-emitting radionuclides in foodstuffs
IEC 61566 Measurement of exposure to radio-frequency electromagnetic fields – Field strength in the frequency range 100 kHz to 1 GHz
IEC 61578 Radiation protection instrumentation – Calibration and verification of the effectiveness of radon compensation for alpha and/or beta aerosol measuring instruments – Test methods
IEC 61580 Measurement of return loss on waveguide and waveguide assemblies
IEC 61582 Radiation protection instrumentation – In vivo counters – Classification, general requirements and test procedures for portable, transportable and installed equipment
IEC 61584 Radiation protection instrumentation – Installed, portable or transportable assemblies – Measurement of air kerma direction and air kerma rate
IEC TS 61586 Estimation of the reliability of electrical connectors
IEC 61587 Mechanical structures for electronic equipment – Tests for IEC 60917 and IEC 60297 series
IEC 61588 Precision clock synchronization protocol for networked measurement and control systems
IEC 61591 Household range hoods – Methods for measuring performance
IEC 61811 Electromechanical telecom elementary relays of assessed quality
IEC 61812 Time relays for industrial and residential use
IEC TS 61813 Live working – Care, maintenance and in-service testing of aerial devices with insulating booms
IEC 61817 Household portable appliances for cooking, grilling and similar use – Methods of measuring performance Household portable appliances for cooking, grilling and similar use – Methods for measuring performance
IEC 61821 Electrical installations for lighting and beaconing of aerodromes – Maintenance of aeronautical ground lighting constant current series circuits
IEC 61822 Electrical installations for lighting and beaconing of aerodromes – Constant current regulators
IEC 61823 Electrical installations for lighting and beaconing of aerodromes – AGL series transformers
IEC TS 61827 Electrical installations for lighting and beaconing of aerodromes – Characteristics of inset and elevated luminaires used on aerodromes and heliports
IEC 61828 Ultrasonics – Focusing transducers – Definitions and measurement methods for the transmitted fields
IEC TR 61831 On-line analyser systems – Guide to design and installation
IEC TR 61832 Design and installation of on-line analyser systems – Guide to technical enquiry and bid evaluation
IEC 61834 Recording – Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625–50, 1125–60 and 1250-50 systems)
IEC 61835 Helical-scan digital component video cassette recording system using 12,65 mm (0,5 in) magnetic tape – Format D-5
IEC TS 61836 Solar photovoltaic energy systems – Terms, definitions and symbols
IEC 61837 Surface mounted piezoelectric devices for frequency control and selection – Standard outlines and terminal lead connections
IEC TR 61838 Nuclear power plants – Instrumentation and control important to safety – Use of probabilistic safety assessment for the classification of functions
IEC 61839 Nuclear power plants – Design of control rooms – Functional analysis and assignment
IEC 61842 Microphones and earphones for speech communications
IEC 61843 Measuring method for the level of intermodulation products generated in a gyromagnetic device
IEC 61883 Consumer audio/video equipment – Digital interface
IEC 61888 Nuclear power plants – Instrumentation important to safety – Determination and maintenance of trip setpoints
IEC 61892 Mobile and fixed offshore units – Electrical installations
IEC TS 61895 Ultrasonics – Pulsed Doppler diagnostic systems – Test procedures to determine performance
IEC 61897 Overhead lines – Requirements and tests for Stockbridge type aeolian vibration dampers
IEC TR 61901 Development tests recommended on cables with a longitudinally applied metal foil for rated voltages above 30 kV (Um = 36 kV)
IEC 61904 Video recording – Helical-scan digital component video cassette recording format using 12,65 mm magnetic tape and incorporating data compression (Format digital-L)
IEC 61907 Communication network dependability engineering
IEC TR 61908 The technology roadmap for industry data dictionary structure, utilization and implementation
IEC 61910 Medical electrical equipment – Radiation dose documentation
IEC TR 61911 Live working – Guidelines for installation of distribution line conductors – Stringing equipment and accessory items (Withdrawn, replaced by IEC TR 61328:2017)
IEC TR 61912 Low-voltage switchgear and control gear – Overcurrent protective devices
IEC 61914 Cable cleats for electrical installations
IEC 61915 Low-voltage switchgear and control gear – Device profiles for networked industrial devices
IEC TR 61916 Electrical accessories – Harmonization of general rules
IEC 61918 Industrial communication networks – Installation of communication networks in industrial premises
IEC 61920 Infrared free air applications
IEC 61921 Power capacitors – Low-voltage power factor correction banks
IEC 61922 High-frequency induction heating installations – Test methods for the determination of power output of the generator
IEC TR 61923 Household electrical appliances – Method of measuring performance – Assessment of repeatability and reproducibility
IEC 61924 Maritime navigation and radiocommunication equipment and systems – Integrated navigation systems
IEC 61925 Multimedia systems and equipment – Multimedia home server systems – Vocabulary of home server
IEC 61926 Design automation
IEC TR 61930 Fibre optic graphical symbology
IEC TR 61931 Fibre optic – Terminology
IEC TS 61934 Electrical insulating materials and systems – Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses
IEC 61935 Specification for the testing of balanced and coaxial information technology cabling
IEC 61936 Power installations exceeding 1 kV a.c.
IEC 61937 Digital audio – Interface for non-linear PCM encoded audio bitstreams applying IEC 60958
IEC 61938 Multimedia systems – Guide to the recommended characteristics of analogue interfaces to achieve interoperability
IEC 61943 Integrated circuits – Manufacturing line approval application guideline
IEC TS 61945 Integrated circuits – Manufacturing line approval – Methodology for technology and failure analysis
IEC TR 61946 Mineral insulating oils – Characterization of paraffinic/naphthenic nature – Low temperature differential scanning calorimetry (DSC) test method
IEC 61947 Electronic projection – Measurement and documentation of key performance criteria
IEC TR 61948 Nuclear medicine instrumentation – Routine tests
IEC TS 61949 Ultrasonics – Field characterization – In situ exposure estimation in finite-amplitude ultrasonic beams
IEC 61950 Cable management systems – Specifications for conduit fittings and accessories for cable installations for extra heavy duty electrical steel conduit
IEC 61951 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Portable sealed rechargeable single cells
IEC 61952 Insulators for overhead lines – Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V – Definitions, test methods and acceptance criteria
IEC TS 61956 Methods of test for the evaluation of water treeing in insulating materials
IEC 61959 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Mechanical tests for sealed portable secondary cells and batteries
IEC 61960 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Secondary lithium cells and batteries for portable applications
IEC 61991 Railway applications – Rolling stock – Protective provisions against electrical hazards
IEC 61992 Railway applications – Fixed installations – DC switchgear
IEC 61993 Maritime navigation and radiocommunication equipment and systems
IEC TS 61994 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection – Glossary
IEC 61995 Devices for the connection of luminaires for household and similar purposes
IEC 61996 Maritime navigation and radiocommunication equipment and systems – Shipborne voyage data recorder (VDR)
IEC TR 61997 Guidelines for the user interface in multimedia equipment for general purpose use
IEC TR 61998 Model and framework for standardization in multimedia equipment and systems
IEC TR 62000 Guidance for combining different single-mode fibres types
IEC TR 62001 High-voltage direct current (HVDC) systems – Guidance to the specification and design evaluation of AC
IEC 62002 Mobile and portable DVB-T/H radio access
IEC 62003 Nuclear power plants – Instrumentation and control important to safety – Requirements for electromagnetic compatibility testing
IEC 62004 Thermal-resistant aluminium alloy wire for overhead line conductor
IEC 62005 Reliability of fibre optic interconnecting devices and passive components
IEC 62006 Hydraulic machines – Acceptance tests of small hydroelectric installations
IEC 62007 Semiconductor optoelectronic devices for fibre optic system applications
IEC 62008 Performance characteristics and calibration methods for digital data acquisition systems and relevant software
IEC TR 62010 Analyser systems – Guidance for maintenance management
IEC 62011 Insulating materials – Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes
IEC 62012 Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments
IEC 62014 Electronic design automation libraries
IEC 62014-4 IP-XACT – Standard Structure for Packaging, Integrating, and Reusing IP within Tool Flows
IEC 62014-5 Quality of Electronic and Software Intellectual Property Used in System and System on Chip (SoC) Designs
IEC 62018 Power consumption of information technology equipment – Measurement methods
IEC 62019 Electrical accessories – Circuit-breakers and similar equipment for household use – Auxiliary contact units
IEC 62020 Electrical accessories – Residual current monitors for household and similar uses (RCMs)
IEC 62021 Insulating liquids – Determination of acidity
IEC 62022 Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles
IEC 62023 Structuring of technical information and documentation
IEC 62024 High frequency inductive components – Electrical characteristics and measuring methods
IEC 62025 High frequency inductive components – Non-electrical characteristics and measuring methods
IEC 62026 Low-voltage switchgear and control gear – Controller-device interfaces (CDIs)
IEC 62027 Preparation of object lists, including parts lists
IEC 62028 General methods of measurement for digital television receivers
IEC 62031 LED modules for general lighting – Safety specifications
IEC 62032 Guide for the Application, Specification and Testing of Phase-Shifting Transformers
IEC 62033 Attenuation uniformity in optical fibres
IEC 62034 Automatic test systems for battery powered emergency escape lighting
IEC 62060 Secondary cells and batteries – Monitoring of lead acid stationary batteries – User guide
IEC 62061 Safety of machinery: Functional safety of electrical, electronic and programmable electronic control systems
IEC TR 62063 High-voltage switchgear and control gear – The use of electronic and associated technologies in auxiliary equipment of switchgear and control gear
IEC 62065 Maritime navigation and radiocommunication equipment and systems – Track control systems – Operational and performance requirements, methods of testing and required test results
IEC TR 62066 Surge overvoltages and surge protection in low-voltage a.c. power systems – General basic information
IEC 62067 Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) – Test methods and requirements
IEC 62068 Electrical insulating materials and systems – General method of evaluation of electrical endurance under repetitive voltage impulses
IEC 62070 Broadcast digital video tape recorders – Identification method for recording and/or reproduction error status
IEC 62071 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape – Format D-7
IEC TS 62073 Guidance on the measurement of hydrophobicity of insulator surfaces
IEC 62108 Concentrator photovoltaic (CPV) modules and assemblies – Design qualification and type approval
IEC 62109 Safety of power converters for use in photovoltaic power systems
IEC 62110 Electric and magnetic field levels generated by AC power systems – Measurement procedures with regard to public exposure
IEC 62115 Electric toys – Safety
IEC 62116 Utility-interconnected photovoltaic inverters – Test procedure of islanding prevention measures
IEC 62117 Nuclear reactor instrumentation – Pressurized light water reactors (PWR) – Monitoring adequate cooling within the core during cold shutdown
IEC 62121 Methods of measurement for minidisc recorders/players
IEC 62122 Methods of measurement for consumer-use digital VTRs – Electronic and mechanical performances
IEC 62124 Photovoltaic (PV) stand alone systems – Design verification
IEC TR 62125 Environmental statement specific to IEC TC 20 – Electric cables
IEC 62127 Ultrasonics – Hydrophones
IEC 62128 Railway applications – Fixed installations – Electrical safety, earthing and the return circuit
IEC 62129 Calibration of wavelength/optical frequency measurement instruments
IEC TR 62130 Climatic field data including validation
IEC TR 62131 Environmental conditions – Vibration and shock of electrotechnical equipment
IEC 62132 Integrated circuits – Measurement of electromagnetic immunity
IEC 62133 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
IEC 62137 Surface mounting technology – Environmental and endurance test methods for surface mount solder joint
IEC 62138 Nuclear power plants – Instrumentation and control important for safety – Software aspects for computer-based systems performing category B or C functions
IEC 62141 Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-4 compression – Type D-16 format
IEC TS 62143 Electrical installations for lighting and beaconing of aerodromes – Aeronautical ground lighting systems – Guidelines for the development of a safety lifecycle methodology
IEC 62146 Grading capacitors for high-voltage alternating current circuit-breakers
IEC 62148 Fibre optic active components and devices – Package and interface standards
IEC 62149 Fibre optic active components and devices – Performance standards
IEC 62150 Fibre optic active components and devices – Test and measurement procedures
IEC 62151 Safety of equipment electrically connected to a telecommunication network
IEC TR 62152 Transmission properties of cascaded two-ports or quadripols – Background of terms and definitions
IEC 62153 Metallic communication cables test methods
IEC 62155 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
IEC 62156 Digital video recording with video compression 12,65 mm type D-9 component format 525/60 and 625/50 (Digital S)
IEC PAS 62162 Field-induced charged-device model test method for electrostatic discharge withstand thresholds of microelectronic components
IEC TR 62188 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Design and manufacturing recommendations for portable batteries made from sealed secondary cells
IEC 62192 Live working – Insulating ropes
IEC 62193 Live working – Telescopic sticks and telescopic measuring sticks
IEC 62194 Method of evaluating the thermal performance of enclosures
IEC 62196 Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles
IEC 62197 Connectors for electronic equipment – Quality assessment requirements
IEC 62198 Managing risk in projects – Application guidelines
IEC 62208 Empty enclosures for low-voltage switchgear and control gear assemblies – General requirements
IEC 62209 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Human models, instrumentation, and procedures
IEC TR 62222 Fire performance of communication cables installed in buildings
IEC 62223 Insulators – Glossary of terms and definitions
IEC TS 62224 Multimedia home server systems – Conceptual model for digital rights management
IEC 62226 Exposure to electric or magnetic fields in the low and intermediate frequency range – Methods for calculating the current density and internal electric field induced in the human body
IEC 62227 Multimedia home server systems – Digital rights permission code
IEC 62228 Integrated circuits – EMC evaluation of transceivers
IEC TS 62229 Multimedia systems and equipment – Multimedia e-publishing and e-book – Conceptual model for multimedia e-publishing
IEC 62230 Electric cables – Spark-test method
IEC 62231 Composite station post insulators for substations with AC voltages greater than 1 000 V up to 245 kV
IEC 62232 Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure
IEC 62233 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure
IEC TR 62235 Nuclear facilities – Instrumentation and control systems important to safety – Systems of interim storage and final repository of nuclear fuel and waste
IEC 62237 Live working – Insulating hoses with fittings for use with hydraulic tools and equipment
IEC 62238 Maritime navigation and radiocommunication equipment and systems – VHF radiotelephone equipment incorporating Class "D" Digital Selective Calling (DSC) – Methods of testing and required test results
IEC TS 62239 Process management for avionics – Management plan
IEC TR 62240 Process management for avionics – Electronic components capability in operation
IEC 62241 Nuclear power plants – Main control room – Alarm functions and presentation
IEC 62243 Artificial Intelligence Exchange and Service Tie to All Test Environments (AI-ESTATE)
IEC 62244 Radiation protection instrumentation – Installed radiation monitors for the detection of radioactive and special nuclear materials at national borders
IEC 62246 Reed switches
IEC TR 62251 Multimedia systems and equipment – Quality assessment – Audio-video communication systems
IEC 62253 Photovoltaic pumping systems – Design qualification and performance measurements
IEC 62255 Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) – Outside plant cables
IEC 62256 Hydraulic turbines, storage pumps and pump-turbines – Rehabilitation and performance improvement
IEC TS 62257 Recommendations for renewable energy and hybrid systems for rural electrification
IEC 62258 Semiconductor die products
IEC 62259 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Nickel-cadmium prismatic secondary single cells with partial gas recombination
IEC 62262 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
IEC TR 62263 Live working – Guidelines for the installation and maintenance of optical fibre cables on overhead power lines
IEC TR 62284 Effective area measurements of single-mode optical fibres – Guidance
IEC TR 62285 Application guide for non-linear coefficient measuring methods
IEC 62286 Service diagnostic interface for consumer electronics products and networks – Implementation for IEEE 1394
IEC 62287 Maritime navigation and radiocommunication equipment and systems – Class B shipborne equipment of the automatic identification system (AIS)
IEC 62288 Maritime navigation and radiocommunication equipment and systems – Presentation of navigation-related information on shipborne navigational displays – General requirements, methods of testing and required test results
IEC 62289 Video recording – Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-2 Compression – Format D-10
IEC 62290 Railway applications – Urban guided transport management and command/control systems
IEC TR 62291 Multimedia data storage – Application program interface for UDF based file systems
IEC 62295 Multimedia systems – Common communication protocol for inter-connectivity on heterogeneous networks
IEC TR 62296 Considerations of unaddressed safety aspects in the second edition of IEC 60601-1 and proposals for new requirements
IEC 62297 Triggering messages for broadcast applications
IEC 62298 Teleweb application
IEC 62300 Consumer audio/video equipment digital interface with plastic optical fibre
IEC 62301 Household electrical appliances – Measurement of standby power
IEC 62304 Medical Device Software – Software Life Cycle Processes
IEC 62305 Protection Against Lightning
IEC 62310 Static Transfer Systems (STS)
IEC 62325 Standards related to energy market models & communications
IEC TR 62331 Pulsed field magnetometry
IEC 62351 Power System Control and Associated Communications – Data and Communication Security
IEC 62353 Medical electrical equipment – Recurrent test and test after repair of medical electrical equipment
IEC/TR 62357 Power system control and associated communications – Reference architecture for object models, services and protocols
IEC 62365 Digital audio – Digital input-output interfacing – Transmission of digital audio over asynchronous transfer mode (ATM) networks
IEC 62366 Medical devices – Application of usability engineering to medical devices
IEC 62368 Audio/video, information and communication technology equipment
IEC 62379 Common control interface for networked digital audio and video products
IEC 62384 DC or AC supplied electronic control gear for LED modules – Performance requirements
IEC TS 62556 Ultrasonics – Field characterization – Specification and measurement of field parameters for high intensity therapeutic ultrasound (HITU) transducers and systems
IEC 62560 Self-ballasted LED-lamps for general lighting services by voltage > 50 V – Safety specifications
IEC 62561 Lightning protection system components (LPSC)
IEC 62600 Marine energy - Wave, tidal and other water current converters.[2]
IEC 62605 Multimedia systems and equipment – Multimedia e-publishing and e-books – Interchange format for e-dictionaries
IEC 62606 General requirements for arc fault detection devices
IEC 62612 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V – Performance requirements
IEC 62703 Expression of performance of fluorometric oxygen analyzers in liquid media
IEC 62708 Documents kinds for electrical and instrumentation projects in the process industry
IEC 62717 LED modules for general lighting – Performance requirements
IEC 62734 Industrial networks – Wireless communication network and communication profiles – ISA 100.11a
IEC 62752 In-cable control and protection device for mode 2 charging of electric roadvehicles
IEC 62769 Field device integration (FDI)
IEC 62776 Double-capped LED lamps designed to retrofit linear fluorescent lamps – Safety specifications
IEC/TR 62794 Industrial-process measurement, control and automation – Reference model for representation of production facilities (digital factory)
IEC/TR 62795 Interoperation guide of field device tool (FDT) / device type manager (DTM) and electronic device description language (EDDL)
IEC/TS 62796 Energy efficiency in electroheating installations
IEC 62798 Industrial electroheating equipment – Test methods for infrared emitters
IEC/TR 62837 Energy efficiency through automation systems
IEC 62840 Electric vehicle battery swap system
IEC 62881 Cause and Effect Matrix
IEC 62885 Dry vacuum cleaners for household or similar use – Methods for measuring the performance
IEC/TS 62872 Industrial-process measurement, control and automation system interface between industrial facilities and the smart grid
IEC/TR 62914 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Experimental procedure for the forced internal short-circuit test of IEC 62133:2012
IEC/PAS 62948 Industrial networks – Wireless communication network and communication profiles – WIA-FA
IEC/PAS 62953 Industrial communication networks – Fieldbus specifications – ADS-net
IEC 63402 Energy Efficiency Systems - Smart Grid - Customer Energy Management Systems - General Requirements and Architecture
IEC 63403 LED packages for horticultural lighting
IEC 63404 Switchgear and controlgear and their assemblies for low voltage – Integration method of radiocommunication device into an equipment
IEC 63405 High-voltage test techniques - Dielectric loss measurements "PROPOSED HORIZONTAL STANDARD"
IEC/TS 63406 Generic RMS simulation models of converter-based generating units for power system dynamic analysis
IEC 63407 Conductive charging of electric vehicles - Contact interface for automated connection device (ACD)
IEC/SRD 63408 Safety Aspects – Guideline for Adult AAL Care Recipients in standards and other specifications
IEC 63409 Photovoltaic power generating systems connection with grid
IEC/TR 63410 Decentralized electrical energy systems roadmap
IEC/TR 63411 Grid Connection of Offshore Wind via VSC-HVDC System
IEC 63412 Ultrasonics - Shear-wave elastography
IEC 63413 Nuclear Power Plants - Instrumentation and control systems important to safety - Platform qualification
IEC/TS 63414 Artificial pollution tests on high-voltage insulators made of hydrophobicity transfer materials to be used on a.c. and d.c. systems
IEC/TR 63415 Nuclear Power plants – Instrumentation and control systems – Use of formal security models for I&C security architecture design and assessment
IEC/SRD 63416 Ethical considerations of AI when Applied in the Active Assisted Living (AAL) context
IEC/TS 63417 Guide and plan to develop a unified IEC Smart energy Ontology
IEC 63418 Fixed accessories intended for household and similar purposes that supply power through an interface
IEC 63419 Guideline for Switching Reliability Evaluation procedures for Gallium Nitride Power Conversion Devices
IEC/SRD 63420 Cooperative Multiple Systems in Connected Home Environments – AAL SOTIF of E/E Systems
IEC 63423 Nuclear Power Plants - Instrumentation and control systems important to safety - Cable assemblies for Harsh Environment Purposes
IEC/TR 63424 Validation of dynamic power control and exposure time-averaging algorithms
