Magnesium is a chemical element; it has symbolMg and atomic number 12. It is a shiny gray metal having a low density, low melting point and high chemical reactivity. Like the other alkaline earth metals (group 2 of the periodic table) it occurs naturally only in combination with other elements and it almost always has an oxidation state of +2. It reacts readily with air to form a thin passivation coating of magnesium oxide that inhibits further corrosion of the metal. The free metal burns with a brilliant-white light. The metal is obtained mainly by electrolysis of magnesium salts obtained from brine. It is less dense than aluminium and is used primarily as a component in strong and lightweight alloys that contain aluminium.
In the cosmos, magnesium is produced in large, aging stars by the sequential addition of three helium nuclei to a carbon nucleus. When such stars explode as supernovas, much of the magnesium is expelled into the interstellar medium where it may recycle into new star systems. Magnesium is the eighth most abundant element in the Earth's crust[13] and the fourth most common element in the Earth (after iron, oxygen and silicon), making up 13% of the planet's mass and a large fraction of the planet's mantle. It is the third most abundant element dissolved in seawater, after sodium and chlorine.[14]
This element is the eleventh most abundant element by mass in the human body and is essential to all cells and some 300 enzymes.[15] Magnesium ions interact with polyphosphate compounds such as ATP, DNA, and RNA. Hundreds of enzymes require magnesium ions to function. Magnesium compounds are used medicinally as common laxatives and antacids (such as milk of magnesia), and to stabilize abnormal nerve excitation or blood vessel spasm in such conditions as eclampsia.[15]
Characteristics
Physical properties
Elemental magnesium is a gray-white lightweight metal, two-thirds the density of aluminium. Magnesium has the lowest melting (923 K (650 °C)) and the lowest boiling point (1,363 K (1,090 °C)) of all the alkaline earth metals.[16]
Pure polycrystalline magnesium is brittle and easily fractures along shear bands. It becomes much more malleable when alloyed with small amounts of other metals, such as 1% aluminium.[17] The malleability of polycrystalline magnesium can also be significantly improved by reducing its grain size to ca. 1 micron or less.[18]
When finely powdered, magnesium reacts with water to produce hydrogen gas:
However, this reaction is much less dramatic than the reactions of the alkali metals with water, because the magnesium hydroxide builds up on the surface of the magnesium metal and inhibits further reaction.[19]
Chemical properties
General chemistry
Ittarnishes slightly when exposed to air, although, unlike the heavier alkaline earth metals, an oxygen-free environment is unnecessary for storage because magnesium is protected by a thin layer of oxide that is fairly impermeable and difficult to remove.[20]
Direct reaction of magnesium with air or oxygen at ambient pressure forms only the "normal" oxide MgO. However, this oxide may be combined with hydrogen peroxide to form magnesium peroxide, MgO2, and at low temperature the peroxide may be further reacted with ozone to form magnesium superoxide Mg(O2)2.[21]
Magnesium reacts with water at room temperature, though it reacts much more slowly than calcium, a similar group 2 metal.[20] When submerged in water, hydrogen bubbles form slowly on the surface of the metal; this reaction happens much more rapidly with powdered magnesium.[20] The reaction also occurs faster with higher temperatures (see § Safety precautions). Magnesium's reversible reaction with water can be harnessed to store energy and run a magnesium-based engine. Magnesium also reacts exothermically with most acids such as hydrochloric acid (HCl), producing magnesium chloride and hydrogen gas, similar to the HCl reaction with aluminium, zinc, and many other metals.[22]
Flammability
Magnesium is highly flammable, especially when powdered or shaved into thin strips, though it is difficult to ignite in mass or bulk.[20] Flame temperatures of magnesium and magnesium alloys can reach 3,100 °C (5,610 °F),[23] although flame height above the burning metal is usually less than 300 mm (12 in).[24] Once ignited, such fires are difficult to extinguish because they resist several substances commonly used to put out fires; combustion continues in nitrogen (forming magnesium nitride), in carbon dioxide (forming magnesium oxide and carbon), and in water (forming magnesium oxide and hydrogen, which also combusts due to heat in the presence of additional oxygen). This property was used in incendiary weapons during the firebombing of cities in World War II, where the only practical civil defense was to smother a burning flare under dry sand to exclude atmosphere from the combustion.
Magnesium may also be used as an igniter for thermite, a mixture of aluminium and iron oxide powder that ignites only at a very high temperature.
A prominent organomagnesium reagent beyond Grignard reagents is magnesium anthracene, with magnesium forming a 1,4-bridge over the central ring. It is used as a source of highly active magnesium. The related butadiene-magnesium adduct serves as a source for the butadiene dianion.
Magnesium in organic chemistry also appears as low valent magnesium compounds, primarily with the magnesium forming diatomic ions in the +1 oxidation state but more recently also with zero oxidation state or a mixture of +1 and zero states.[25] Such compounds find synthetic application as reducing agents and sources of nucleophilic metal atoms.
Source of light
When burning in air, magnesium produces a brilliant white light that includes strong ultraviolet wavelengths. Magnesium powder (flash powder) was used for subject illumination in the early days of photography.[26][27] Later, magnesium filament was used in electrically ignited single-use photography flashbulbs. Magnesium powder is used in fireworks and marine flares where a brilliant white light is required. It was also used for various theatrical effects,[28] such as lightning,[29] pistol flashes,[30] and supernatural appearances.[31]
Detection in solution
The presence of magnesium ions can be detected by the addition of ammonium chloride, ammonium hydroxide and monosodium phosphate to an aqueous or dilute HCl solution of the salt. The formation of a white precipitate indicates the presence of magnesium ions.
Azo violet dye can also be used, turning deep blue in the presence of an alkaline solution of magnesium salt. The color is due to the adsorption of azo violet by Mg(OH)2.
Magnesium is the eighth-most-abundant element in the Earth's crust by mass and tied in seventh place with ironinmolarity.[13] It is found in large deposits of magnesite, dolomite, and other minerals, and in mineral waters, where magnesium ion is soluble.[32]
The Mg2+ cation is the second-most-abundant cation in seawater (about 1⁄8 the mass of sodium ions in a given sample), which makes seawater and sea salt attractive commercial sources for Mg. To extract the magnesium, calcium hydroxide is added to seawater to form magnesium hydroxideprecipitate.[34]
Magnesium is brittle, and fractures along shear bands when its thickness is reduced by only 10% by cold rolling (top). However, after alloying Mg with 1% Al and 0.1% Ca, its thickness could be reduced by 54% using the same process (bottom).
As of 2013, magnesium alloys consumption was less than one million tonnes per year, compared with 50 million tonnes of aluminium alloys. Their use has been historically limited by the tendency of Mg alloys to corrode,[37]creep at high temperatures, and combust.[38]
Corrosion
In magnesium alloys, the presence of iron, nickel, copper, or cobalt strongly activates corrosion. In more than trace amounts, these metals precipitate as intermetallic compounds, and the precipitate locales function as active cathodic sites that reduce water, causing the loss of magnesium.[38] Controlling the quantity of these metals improves corrosion resistance. Sufficient manganese overcomes the corrosive effects of iron. This requires precise control over composition, increasing costs.[38] Adding a cathodic poison captures atomic hydrogen within the structure of a metal. This prevents the formation of free hydrogen gas, an essential factor of corrosive chemical processes. The addition of about one in three hundred parts arsenic reduces the corrosion rate of magnesium in a salt solution by a factor of nearly ten.[38][39]
High-temperature creep and flammability
Magnesium's tendency to creep (gradually deform) at high temperatures is greatly reduced by alloying with zinc and rare-earth elements.[40] Flammability is significantly reduced by a small amount of calcium in the alloy.[38] By using rare-earth elements, it may be possible to manufacture magnesium alloys that are able to not catch fire at higher temperatures compared to magnesium's liquidus and in some cases potentially pushing it close to magnesium's boiling point.[41]
Magnesium has three stable isotopes: 24 Mg, 25 Mg and 26 Mg. All are present in significant amounts in nature (see table of isotopes above). About 79% of Mg is 24 Mg. The isotope 28 Mg is radioactive and in the 1950s to 1970s was produced by several nuclear power plants for use in scientific experiments. This isotope has a relatively short half-life (21 hours) and its use was limited by shipping times.
The nuclide 26 Mg has found application in isotopicgeology, similar to that of aluminium. 26 Mg is a radiogenic daughter product of 26 Al, which has a half-life of 717,000 years. Excessive quantities of stable 26 Mg have been observed in the Ca-Al-rich inclusions of some carbonaceous chondritemeteorites. This anomalous abundance is attributed to the decay of its parent 26 Al in the inclusions, and researchers conclude that such meteorites were formed in the solar nebula before the 26 Al had decayed. These are among the oldest objects in the Solar System and contain preserved information about its early history.
It is conventional to plot 26 Mg/24 Mg against an Al/Mg ratio. In an isochron dating plot, the Al/Mg ratio plotted is 27 Al/24 Mg. The slope of the isochron has no age significance, but indicates the initial 26 Al/27 Al ratio in the sample at the time when the systems were separated from a common reservoir.
World production was approximately 1,100 kt in 2017, with the bulk being produced in China (930 kt) and Russia (60 kt).[44] The United States was in the 20th century the major world supplier of this metal, supplying 45% of world production even as recently as 1995. Since the Chinese mastery of the Pidgeon process the US market share is at 7%, with a single US producer left as of 2013: US Magnesium, a Renco Group company located on the shores of the Great Salt Lake.[45]
In September 2021, China took steps to reduce production of magnesium as a result of a government initiative to reduce energy availability for manufacturing industries, leading to a significant price increase.[46]
Pidgeon and Bolzano processes
An Iranian worker tends to the Pidgeon process
The Pidgeon process and the Bolzano process are similar. In both, magnesium oxide is the precursor to magnesium metal. The magnesium oxide is produced as a solid solution with calcium oxide by calcining the mineral dolomite, which is a solid solution of calcium and magnesium carbonates:
CaCO3·MgCO3 → MgO·CaO + 2 CO2
Reduced occurs at high temperatures with silicon. Instead of pure silicon, a ferrosilicon alloy is used because it is cheaper. The iron component is innoncuouse. The reaction can be represented by the following simplified equation:[47]
MgO·CaO +Si → 2 Mg + Ca2SiO4
The calcium oxide combines with silicon as the oxygen scavenger, yielding the very stable calcium silicate. The Mg/Ca ratio of the precursors can be adjusted by the addition of MgO or CaO.[48]
The Pidgeon and the Bolzano process differ in the details of the heating and the configuration of the reactor. Both generate gaseous Mg that is condensed and collected. The Pidgeon process dominates the worldwide production.[49][50] The Pidgeon method is less technologically complex and because of distillation/vapour deposition conditions, a high purity product is easily achievable.[49]China is almost completely reliant on the silicothermicPidgeon process.
Besides the Pigeon process, the second most used process for magnesium production is electrolysis. This is a two step process. The first step is to prepare feedstock containing magnesium chloride and the second step is to dissociate the compound in electrolytic cells as magnesium metal and chlorine gas.[50] The basic reaction is as follows:
MgCl2 → Mg(g) + Cl2(g)
The temperatures at which this reaction is operated is between 680 and 750 °C.[50]
The magnesium chloride can be obtained using the Dow process, a process that mixes sea water and dolomite in a flocculator or by dehydration of magnesium chloride brines. The electrolytic cells are partially submerged in a molten salt electrolyte to which the produced magnesium chloride is added in concentrations between 6-18%.[50] This process does have its share of disadvantages including production of harmful chlorine gas and the overall reaction being very energy intensive, creating environmental risks.[51] The Pidgeon process is more advantageous regarding its simplicity, shorter construction period, low power consumption and overall good magnesium quality compared to the electrolysis method.[20]
In the United States, magnesium was once obtained principally with the Dow process in Corpus Christi TX, by electrolysis of fused magnesium chloride from brine and sea water. A saline solution containing Mg2+ ions is first treated with lime (calcium oxide) and the precipitated magnesium hydroxide is collected:
The salt is then electrolyzed in the molten state. At the cathode, the Mg2+ ion is reduced by two electrons to magnesium metal:
Mg2+ + 2 e− → Mg
At the anode, each pair of Cl− ions is oxidized to chlorine gas, releasing two electrons to complete the circuit:
2Cl− → Cl 2(g) + 2 e−
Carbothermic process
The carbothermic route to magnesium has been recognized as a low energy, yet high productivity path to magnesium extraction. The chemistry is as follows:
The rotary kiln is used for calcination
C + MgO → CO + Mg
A disadvantage of this method is that slow cooling the vapour can cause the reaction to quickly revert. To prevent this from happening, the magnesium can be dissolved directly in a suitable metal solvent before reversion starts happening. Rapid quenching of the vapour can also be performed to prevent reversion.[52]
YSZ process
A newer process, solid oxide membrane technology, involves the electrolytic reduction of MgO. At the cathode, Mg2+ ion is reduced by two electrons to magnesium metal. The electrolyte is yttria-stabilized zirconia (YSZ). The anode is a liquid metal. At the YSZ/liquid metal anode O2− is oxidized. A layer of graphite borders the liquid metal anode, and at this interface carbon and oxygen react to form carbon monoxide. When silver is used as the liquid metal anode, there is no reductant carbon or hydrogen needed, and only oxygen gas is evolved at the anode.[53] It was reported in 2011 that this method provides a 40% reduction in cost per pound over the electrolytic reduction method.[54]
History
The name magnesium originates from the Greek word for locations related to the tribe of the Magnetes, either a district in Thessaly called Magnesia[55]orMagnesia ad Sipylum, now in Turkey.[56] It is related to magnetite and manganese, which also originated from this area, and required differentiation as separate substances. See manganese for this history.
In 1618, a farmer at Epsom in England attempted to give his cows water from a local well. The cows refused to drink because of the water's bitter taste, but the farmer noticed that the water seemed to heal scratches and rashes. The substance obtained by evaporating the water became known as Epsom salts and its fame spread.[57] It was eventually recognized as hydrated magnesium sulfate, MgSO 4·7 H 2O.[58]
The metal itself was first isolated by Sir Humphry Davy in England in 1808. He used electrolysis on a mixture of magnesia and mercuric oxide.[59]Antoine Bussy prepared it in coherent form in 1831. Davy's first suggestion for a name was 'magnium',[59] but the name magnesium is now used in most European languages.[60]
Magnesium is the third-most-commonly-used structural metal, following iron and aluminium.[61] The main applications of magnesium are, in order: aluminium alloys, die-casting (alloyed with zinc),[62] removing sulfur in the production of iron and steel, and the production of titanium in the Kroll process.[63]
Magnesium is used in lightweight materials and alloys. For example, when infused with silicon carbide nanoparticles, it has extremely high specific strength.[64]
Historically, magnesium was one of the main aerospace construction metals and was used for German military aircraft as early as World War I and extensively for German aircraft in World War II. The Germans coined the name "Elektron" for magnesium alloy, a term which is still used today. In the commercial aerospace industry, magnesium was generally restricted to engine-related components, due to fire and corrosion hazards. Magnesium alloy use in aerospace is increasing in the 21st century, driven by the importance of fuel economy.[65] Recent developments in metallurgy and manufacturing have allowed for the potential for magnesium alloys to act as replacements for aluminium and steel alloys in certain applications.[66][67]
Rieke et al developed a "general approach for preparing highly reactive metal powders by reducing metal salts in ethereal or hydrocarbon solvents using alkali metals as reducing agents" known to us as the Rieke process.[68] In 1974 he told about Rieke-magnesium.[69] Rieke followed this up in 1989 with the identification of Rieke metals.[70]
Porsche used magnesium alloy frames in the 917/053 that won Le Mans in 1971, and continues to use magnesium alloys for its engine blocks due to the weight advantage.[75]
Volkswagen Group has used magnesium in its engine components for many years.[76]
BMW used magnesium alloy blocks in their N52 engine, including an aluminium alloy insert for the cylinder walls and cooling jackets surrounded by a high-temperature magnesium alloy AJ62A. The engine was used worldwide between 2005 and 2011 in various 1, 3, 5, 6, and 7 series models; as well as the Z4, X1, X3, and X5.[78]
Chevrolet used the magnesium alloy AE44 in the 2006 Corvette Z06.[79]
Both AJ62A and AE44 are recent developments in high-temperature low-creep magnesium alloys. The general strategy for such alloys is to form intermetallic precipitates at the grain boundaries, for example by adding mischmetalorcalcium.[80]
Electronics
Because of low density and good mechanical and electrical properties, magnesium is used for manufacturing of mobile phones, laptop and tablet computers, cameras, and other electronic components.[81] It was used as a premium feature because of its light weight in some 2020 laptops.[82]
Products made of magnesium: firestarter and shavings, sharpener, magnesium ribbon
Magnesium materials in medicine
Recent research promises a high development potential of magnesium materials as resorbable implant material (e.g. as stent) for the human body.[83][84] Common magnesium alloy elements are calcium and zinc,[85] but also rare earth and silver are investigated.[86] The biodegradable behavior of magnesium is a decisive advantage when used as an implant material to be used for a limited period of time, as it would dissolve without risk after a certain period of time. This would eliminate the risks and costs of an operation to remove the implant.[87]
Other
Magnesium, being readily available and relatively nontoxic, has a variety of uses:
Magnesium is flammable, burning at a temperature of approximately 3,100 °C (3,370 K; 5,610 °F),[23] and the autoignition temperature of magnesium ribbon is approximately 473 °C (746 K; 883 °F).[88] It produces intense, bright, white light when it burns. Magnesium's high combustion temperature makes it a useful tool for starting emergency fires. Other uses include flash photography, flares, pyrotechnics, fireworks sparklers, and trick birthday candles. Magnesium is also often used to ignite thermite or other materials that require a high ignition temperature. Magnesium continues to be used as an incendiary element in warfare.[89]Magnesium firestarter (in left hand), used with a pocket knife and flint to create sparks that ignite the shavings
Alloyed with aluminium with aluminium-magnesium alloys being used mainly for beverage cans,[94] sports equipment such as golf clubs,[95] fishing reels,[96] and archery bows and arrows.[97]
Many car and aircraft manufacturers have made engine and body parts from magnesium.[98]
The important interaction between phosphate and magnesium ions makes magnesium essential to the basic nucleic acid chemistry of all cells of all known living organisms. More than 300 enzymes require magnesium ions for their catalytic action, including all enzymes using or synthesizing ATP and those that use other nucleotides to synthesize DNA and RNA. The ATP molecule is normally found in a chelate with a magnesium ion.[111]
Spices, nuts, cereals, cocoa and vegetables are good sources of magnesium.[15] Green leafy vegetables such as spinach are also rich in magnesium.[112]
Dietary recommendations
In the UK, the recommended daily values for magnesium are 300 mg for men and 270 mg for women.[113] In the U.S. the Recommended Dietary Allowances (RDAs) are 400 mg for men ages 19–30 and 420 mg for older; for women 310 mg for ages 19–30 and 320 mg for older.[114]
An adult body has 22–26 grams of magnesium,[15][117] with 60% in the skeleton, 39% intracellular (20% in skeletal muscle), and 1% extracellular.[15] Serum levels are typically 0.7–1.0 mmol/L or 1.8–2.4 mEq/L. Serum magnesium levels may be normal even when intracellular magnesium is deficient. The mechanisms for maintaining the magnesium level in the serum are varying gastrointestinal absorption and renal excretion. Intracellular magnesium is correlated with intracellular potassium. Increased magnesium lowers calcium[118] and can either prevent hypercalcemia or cause hypocalcemia depending on the initial level.[118] Both low and high protein intake conditions inhibit magnesium absorption, as does the amount of phosphate, phytate, and fat in the gut. Unabsorbed dietary magnesium is excreted in feces; absorbed magnesium is excreted in urine and sweat.[119]
Detection in serum and plasma
Magnesium status may be assessed by measuring serum and erythrocyte magnesium concentrations coupled with urinary and fecal magnesium content, but intravenous magnesium loading tests are more accurate and practical.[120] A retention of 20% or more of the injected amount indicates deficiency.[121] As of 2004, no biomarker has been established for magnesium.[122]
Magnesium concentrations in plasma or serum may be monitored for efficacy and safety in those receiving the drug therapeutically, to confirm the diagnosis in potential poisoning victims, or to assist in the forensic investigation in a case of fatal overdose. The newborn children of mothers who received parenteral magnesium sulfate during labor may exhibit toxicity with normal serum magnesium levels.[123]
Deficiency
Low plasma magnesium (hypomagnesemia) is common: it is found in 2.5–15% of the general population.[124] From 2005 to 2006, 48 percent of the United States population consumed less magnesium than recommended in the Dietary Reference Intake.[125] Other causes are increased renal or gastrointestinal loss, an increased intracellular shift, and proton-pump inhibitor antacid therapy. Most are asymptomatic, but symptoms referable to neuromuscular, cardiovascular, and metabolic dysfunction may occur.[124]Alcoholism is often associated with magnesium deficiency. Chronically low serum magnesium levels are associated with metabolic syndrome, diabetes mellitus type 2, fasciculation, and hypertension.[126]
Therapy
Intravenous magnesium is recommended by the ACC/AHA/ESC 2006 Guidelines for Management of Patients With Ventricular Arrhythmias and the Prevention of Sudden Cardiac Death for patients with ventricular arrhythmia associated with torsades de pointes who present with long QT syndrome; and for the treatment of patients with digoxin induced arrhythmias.[127]
Hypomagnesemia, including that caused by alcoholism, is reversible by oral or parenteral magnesium administration depending on the degree of deficiency.[130]
There is limited evidence that magnesium supplementation may play a role in the prevention and treatment of migraine.[131]
Sorted by type of magnesium salt, other therapeutic applications include:
Magnesium carbonate powder is used by athletes such as gymnasts, weightlifters, and climbers to eliminate palm sweat, prevent sticking, and improve the grip on gymnastic apparatus, lifting bars, and climbing rocks.
Overdose
Overdose from dietary sources alone is unlikely because excess magnesium in the blood is promptly filtered by the kidneys,[124] and overdose is more likely in the presence of impaired renal function. In spite of this, megadose therapy has caused death in a young child,[133] and severe hypermagnesemia in a woman[134] and a young girl[135] who had healthy kidneys.
The most common symptoms of overdose are nausea, vomiting, and diarrhea; other symptoms include hypotension, confusion, slowed heart and respiratory rates, deficiencies of other minerals, coma, cardiac arrhythmia, and death from cardiac arrest.[118]
Function in plants
Plants require magnesium to synthesize chlorophyll, essential for photosynthesis.[136] Magnesium in the center of the porphyrin ring in chlorophyll functions in a manner similar to the iron in the center of the porphyrin ring in heme. Magnesium deficiency in plants causes late-season yellowing between leaf veins,[137] especially in older leaves, and can be corrected by either applying epsom salts (which is rapidly leached), or crushed dolomiticlimestone, to the soil.
Magnesium block heated with blowtorch to self-combustion, emitting intense white light
Magnesium metal and its alloys can be explosive hazards; they are highly flammable in their pure form when molten or in powder or ribbon form. Burning or molten magnesium reacts violently with water. When working with powdered magnesium, safety glasses with eye protection and UV filters (such as welders use) are employed because burning magnesium produces ultraviolet light that can permanently damage the retina of a human eye.[140]
Magnesium is capable of reducing water and releasing highly flammable hydrogen gas:[141]
Therefore, water cannot extinguish magnesium fires. The hydrogen gas produced intensifies the fire. Dry sand is an effective smothering agent, but only on relatively level and flat surfaces.
Hence, carbon dioxide fuels rather than extinguishes magnesium fires.
Burning magnesium can be quenched by using a Class D dry chemical fire extinguisher, or by covering the fire with sand or magnesium foundry flux to remove its air source.[143]
^The thermal expansion is anisotropic: the parameters (at 20 °C) for each crystal axis are αa = 25.31×10−6/K, αc = 27.03×10−6/K, and αaverage = αV/3 = 25.91×10−6/K.[3]
^ abcdArblaster, John W. (2018). Selected Values of the Crystallographic Properties of Elements. Materials Park, Ohio: ASM International. ISBN978-1-62708-155-9.
^Mg(0) has been synthesized in a compound containing a Na2Mg22+ cluster coordinated to a bulky organic ligand; see Rösch, B.; Gentner, T. X.; Eyselein, J.; Langer, J.; Elsen, H.; Li, W.; Harder, S. (2021). "Strongly reducing magnesium(0) complexes". Nature. 592 (7856): 717–721. Bibcode:2021Natur.592..717R. doi:10.1038/s41586-021-03401-w. PMID33911274. S2CID233447380
^Gschneider, K. A. (1964). Physical Properties and Interrelationships of Metallic and Semimetallic Elements. Solid State Physics. Vol. 16. p. 308. doi:10.1016/S0081-1947(08)60518-4. ISBN9780126077162.
^Vol'nov, I. I.; Tokareva, S. A.; Belevskii, V. N.; Latysheva, E. I. (March 1970). "The formation of magnesium perperoxide Mg(O2)2 in the reaction of magnesium peroxide with ozone". Bulletin of the Academy of Sciences of the USSR Division of Chemical Science. 19 (3): 468–471. doi:10.1007/bf00848959.
^Billboard. Nielsen Business Media, Inc. 1974. p. 20.
^Altman, Rick (2004). Silent Film Sound. Columbia University Press. p. 41. ISBN978-0-231-11663-3.
^Lindsay, David (2005). Madness in the Making: The Triumphant Rise and Untimely Fall of America's Show Inventors. iUniverse. p. 210. ISBN978-0-595-34766-7.
^McCormick, John; Pratasik, Bennie (2005). Popular Puppet Theatre in Europe, 1800-1914. Cambridge University Press. p. 106. ISBN978-0-521-61615-7.
^Birbilis, N.; Williams, G.; Gusieva, K.; Samaniego, A.; Gibson, M. A.; McMurray, H. N. (2013). "Poisoning the corrosion of magnesium". Electrochemistry Communications. 34: 295–298. doi:10.1016/j.elecom.2013.07.021.
^ abDavy, H. (1808). "Electro-chemical researches on the decomposition of the earths; with observations on the metals obtained from the alkaline earths, and on the amalgam procured from ammonia". Philosophical Transactions of the Royal Society of London. 98: 333–370. Bibcode:1808RSPT...98..333D. doi:10.1098/rstl.1808.0023. JSTOR107302. S2CID96364168.
^ abBaker, Hugh D. R.; Avedesian, Michael (1999). Magnesium and magnesium alloys. Materials Park, OH: Materials Information Society. p. 4. ISBN978-0871706577.
^Ketil Amundsen; Terje Kr. Aune; Per Bakke; Hans R. Eklund; Johanna Ö. Haagensen; Carlos Nicolas; et al. (2002). "Magnesium". Ullmann's Encyclopedia of Industrial Chemistry. Wiley-VCH. doi:10.1002/14356007.a15_559. ISBN978-3527306732.
^Rieke, Reuben D.; Sell, Matthew S.; Klein, Walter R.; Chen, Tian-An; Brown, Jeffrey D.; Hanson, Mark V. (1995). "Rieke Metals: Highly Reactive Metal Powders Prepared by Alkali Metal Reduction of Metal Salts". Active Metals. pp. 1–59. doi:10.1002/9783527615179.ch01. ISBN978-3-527-29207-3.
^Kumar, Sachin; Wu, Chuansong (2017). "Review:Mg and Its Alloy——Scope, Future Perspectives and Recent Advancements in Welding and Processing". Journal of Harbin Institute of Technology. 24 (6): 1–37. doi:10.11916/j.issn.1005-9113.17065.
^Liu, JunRu; Wang, XueYi; Saberi, Abbas; Heydari, Zahra (February 2023). "The effect of Co-encapsulated GNPs-CNTs nanofillers on mechanical properties, degradation and antibacterial behavior of Mg-based composite". Journal of the Mechanical Behavior of Biomedical Materials. 138: 105601. doi:10.1016/j.jmbbm.2022.105601. PMID36493612.
^Okutan, Begüm; Schwarze, Uwe Y.; Berger, Leopold; Martinez, Diana C.; Herber, Valentin; Suljevic, Omer; Plocinski, Tomasz; Swieszkowski, Wojciech; Santos, Susana G.; Schindl, Rainer; Löffler, Jörg F.; Weinberg, Annelie M.; Sommer, Nicole G. (March 2023). "The combined effect of zinc and calcium on the biodegradation of ultrahigh-purity magnesium implants". Biomaterials Advances. 146: 213287. doi:10.1016/j.bioadv.2023.213287. hdl:20.500.11850/603905. PMID36669235.
^Linsley, Trevor (2011). "Properties of conductors and insulators". Basic Electrical Installation Work. Taylor & Francis. p. 362. ISBN978-0080966281.
^Ren, Chai; Fang, Z. Zak; Zhou, Chengshang; Lu, Jun; Ren, Yang; Zhang, Xiaoyi (25 September 2014). "Hydrogen Storage Properties of Magnesium Hydride with V-Based Additives". The Journal of Physical Chemistry C. 118 (38): 21778–21784. doi:10.1021/jp504766b.
^
Romani, Andrea, M.P. (2013). "Magnesium in Health and Disease". In Astrid Sigel; Helmut Sigel; Roland K. O. Sigel (eds.). Interrelations between Essential Metal Ions and Human Diseases. Metal Ions in Life Sciences. Vol. 13. Springer. pp. 49–79. doi:10.1007/978-94-007-7500-8_3. ISBN978-94-007-7499-5. PMID24470089.{{cite book}}: CS1 maint: multiple names: authors list (link)
^"Magnesium in diet". MedlinePlus, U.S. National Library of Medicine, National Institutes of Health. 2 February 2016. Retrieved 13 October 2016.
^"6, Magnesium". Dietary Reference Intakes for Calcium, Phosphorus, Magnesium, Vitamin D, and Fluoride. National Academy Press. 1997. pp. 190–249.
^Firoz M; Graber M (2001). "Bioavailability of US commercial magnesium preparations". Magnes Res. 14 (4): 257–262. PMID11794633.
^Lindberg JS; Zobitz MM; Poindexter JR; Pak CY (1990). "Magnesium bioavailability from magnesium citrate and magnesium oxide". J Am Coll Nutr. 9 (1): 48–55. doi:10.1080/07315724.1990.10720349. PMID2407766.
^Saris NE, Mervaala E, Karppanen H, Khawaja JA, Lewenstam A (April 2000). "Magnesium. An update on physiological, clinical and analytical aspects". Clin Chim Acta. 294 (1–2): 1–26. doi:10.1016/S0009-8981(99)00258-2. PMID10727669.
^ abc"Magnesium". Umm.edu. University of Maryland Medical Center. 7 May 2013. Archived from the original on 16 February 2017. Retrieved 19 September 2013.
^Giannini, A. J. (1997). Drugs of Abuse (Second ed.). Los Angeles: Physicians Management Information Co. ISBN978-0874894998.
^Teigen L, Boes CJ (2014). "An evidence-based review of oral magnesium supplementation in the preventive treatment of migraine". Cephalalgia (Review). 35 (10): 912–922. doi:10.1177/0333102414564891. PMID25533715. S2CID25398410. There is a strong body of evidence demonstrating a relationship between magnesium status and migraine. Magnesium likely plays a role in migraine development at a biochemical level, but the role of oral magnesium supplementation in migraine prophylaxis and treatment remains to be fully elucidated. The strength of evidence supporting oral magnesium supplementation is limited at this time.
^Gowariker, Vasant; Krishnamurthy, V. P.; Gowariker, Sudha; Dhanorkar, Manik; Paranjape, Kalyani (8 April 2009). The Fertilizer Encyclopedia. John Wiley & Sons. p. 224. ISBN978-0470431764.
^McGuire, John K.; Kulkarni, Mona Shah; Baden, Harris P. (1 February 2000). "Fatal Hypermagnesemia in a Child Treated With Megavitamin/Megamineral Therapy". Pediatrics. 105 (2): e18. doi:10.1542/peds.105.2.e18. PMID10654978.
Definitions from Wiktionary
Media from Commons
Textbooks from Wikibooks
Resources from Wikiversity
